We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byClement Nash
Modified over 6 years ago
HAMMERS, PUNCHES & CHISELS
BALL PEEN HAMMER PARTS HANDLE HEAD PEENING SURFACE
HAMMER PURPOSES USED TO DRIVE, BEND, STRAIGHTEN, ADJUST, PULL, AND ALIGN THINGS
PROPER USE OF HAMMER HOLD HAMMER FIRMLY NEAR END OF HANDLE STRIKE SQUARELY HANDLE CAN HIT YOUR ARM WHILE SWINGING CAUSING YOU TO MISS
PROPER USE OF HAMMER CHOOSE THE CORRECT SIZE FOR THE JOB YOU ARE DOING HEAD TWICE THE SIZE TOO BIG OF HAMMER
HAMMER MAINTENANCE BEFORE USING, MAKE SURE HANDLE IS NOT CRACKED OR BROKEN MAKE SURE HEAD IS ON TIGHTLY MAKE SURE HEAD ISN’T CRACKED
HAMMERS TYPES SLEDGEBALL PEENMALLET CLAW DEAD BLOW
PUNCH PURPOSE USED TO DRIVE, PUSH, OR ALIGN THINGS ALL PUNCHES HAVE A FLAT NOSE EXCEPT THE CENTER PUNCH
PUNCH TYPES SOFT HARDENED STRAIGHT PUNCH TAPER PUNCH CENTER PUNCH HAS SHARP POINT
CENTER PUNCH USE MARKS METAL WITH SMALL INDENTATION TO HELP KEEP DRILL BIT CENTERED
CHISELS COLD ROUND NOSE CAPE DIAMOND CHISEL CHISEL CHISEL POINT CHISEL
CHISEL PURPOSES USED TO CUT THINGS CHISELS HAVE SHARP CUTTING ENDS
PROPER USE & SAFETY PUNCHES & CHISELS MAKE SURE THE HEAD DOESN’T HAVE A “MUSHROOMED” TOP –GRIND OFF BEFORE USING
PROPER USE & SAFETY PUNCHES & CHISELS (ON TOOL TEST) HOLD THE PUNCH OR CHISEL NEAR THE TOP OF THE HEAD –THIS ALLOWS YOUR HAND SOME GIVE IF YOU MISS WITH YOUR HAMMER
PROPER USE & SAFETY ALWAYS USE EYE PROTECTION STRIKE SQUARELY USE THE PROPER SIZE OF HAMMER
HAMMERS PUNCHES & CHISELS QUESTIONS?
Hand Tools Safety Tips.
January Hand tools can be just as dangerous as power tools and other equipment when not properly used, stored, or maintained. Your hand tools are.
Objective Define tools and materials used in agricultural engineering careers.
2 Chapter Hand Tools. 2 Chapter Hand Tools Objectives Identify the various types of hand tools. Describe the advantages and disadvantages of each type.
Evolution Industries, Inc. Updated October 1, 2010.
Cold Metal Skills Skills Needed for Cold Metal Tasks.
Sheet Metal Hand Tools and Machinery
Tool Identification and Use. Where do you buy tools? Dealers Snap-On Mac Retail Stores Canadian Tire Wal-Mart.
Forming and Forging Mrs. Jones’s Classes.
Name:__________________________ INSTRUCTIONS: Do not lose this packet! It is required at the end of the project to receive credit. Base Plate Hasp Hinge.
Basic Carpentry Hand Tools: Hammers By Ryan Saucier.
HAND AND POWER TOOL SAFETY
© Business & Legal Reports, Inc Alabama Retail is committed to partnering with our members to create and keep safe workplaces. Be sure to check out.
: The hammer is a very simple striking tool. It is just a weighted head and a handle which directs its course. Your toolbox is not complete unless it contains.
Safe Use of Agricultural Mechanics Hand Tools
Produced by, Joe Wintermute ASE Certified Master Automobile Technician
DO NOW LESSON # 1)What are the 5/20/2015. Focus Point: What are the Types of Punches? ► Instructional Objectives: ► 1. List the purpose of various punches.
Repairing and Reconditioning Tools Tool Fitting. Objectives: 1)Identify and remove rust from tools in the lab with 100% accuracy 2)Demonstrate the application.
Hand & Power Tool Safety
© 2021 SlidePlayer.com Inc. All rights reserved.