2. INFLUENCE OF GAMMA IRRADIATION ON SILICON NITRIDE MIS CAPACITORS AND RADIATION HARDNESS Dr. Ercan YILMAZ Abant Izzet Baysal University Bolu-Turkey

3. Contents Basic Properties of Dielectrics Radiation Hardness Silicon Nitride Thin Films Radiation Interactions with Silicon Nitride Thin Films Results

4. Basic Properties of Dielectrics In electromagnetics, we classify materials generally into three broad categories: 1.Conductor - free charge moves easily 2.Semi-conductor - free charge moves somewhat 3.Dielectric (insulators)-no free charge, but alters electric field

5. When a dielectric material is placed in an exernal electric field, the dielectric alters this electric field due to bound or polarization charges that are formed in the dielectric. A capacitor is an example of this. A simplistic model of the atomic conditions that produce this bound charge is the displacement of the electron cloud around a nucleus. In an electric field, the negative charged electron cloud becomes displaced very slightly from the positively charge nucleus: The electrostatic effects of this displacement (potntial and electris field) are model by an electric dipole moment p.

6. Electric dipole moment model is only an approximation, but for charge natural molecules and relatively “small” electric fields, it is a very good model. Using this model, a polarized material can be visualized as These bound charges cannot move. Unlike free charge, bound charge is induced by an external Ē field and vanishes when the external Ē field is removed.

7. Dielectric materials, interfaces, metal gate, work function

8. Radiation Hardness/Hardening Radiation hardening is a method of designing and testing electronic components and systems to make them resistant to damage or malfunctions caused by ionizing radiation (particle radiation and high-energy electromagnetic radiation).electronic componentsionizing radiationparticle radiationelectromagnetic radiation CCDs were generally expected to exhibit radiation tolerance comparable with other CMOS circuits. Some experiments with Co-60 irradiation shows loss of charge transfer performance at doses of 10krads [Lumb and Holland 1988b]. These studies also shows that the charge transfer degradation is a more severe problem than conventional integrated circuit damage mechanisms. Detailed experiments with proton irradiation show that displacement damage creates measurable loss of charge transfer efficiency at doses as low as 10's rads, and hence radiation hardening will require optimized shielding and CCD architectures to minimize loss of data.

9. Normal commercial electronic components are not qualified to work in environments with radiation. Special designed and/or qualified components are required above a radiation dose of a few hundred Rad. Radiation effects on electronics are normally divided into 3 different categories according to their effect on the electronic components. Total ionizing dose (TID): Total Ionizing Dose effects on modern integrated circuits cause the threshold voltage of MOS transistors to change because of trapped charges in the silicon dioxide gate insulator. Displacement damage: Hadrons may displace atoms (therefore called displacement effect) in the silicon lattice of active devices and thereby affect their function. Single event effects (SEE): Single Event Effects refer to the fact that it is not a cumulative effect but an effect related to single individual interactions in the silicon. Highly ionizing particles can directly deposit enough charge locally in the silicon to disturb the function of electronic circuits.

10. Silicon Nitride Thin Films  SiN x thin films with thickness of 100 nm were deposited on p-type (100) silicon substrate by using (PECVD) method.  After deposition, samples annealed at 500 and 700 °C for 1h at N 2 ambient.  The chemical bonds and their densities inside the films were investigated by Fourier transform infrared (FTIR) spectroscopy. Al SiNx Al

11. Annealing temperature evolution of the FTIR spectra of the SiNx films. The following peaks are identified: N-H (~3340 cm -1 ) and Si-H (~2150 cm -1 ) stretching modes, N-H (~1200 cm -1 ) bending mode, asymmetric Si-N (~830 cm -1 ) stretching mode, Si-H (~660 cm -1 ) wag-rocking mode, and symmetric Si-N (~475 cm -1 ) stretching mode Deconvoluted FTIR spectra of the as-deposited sample (a) and the sample annealed at 700°C (b).

12. Radiation Interactions with Silicon Nitride Thin Films The as-deposited and annealed (MIS) capacitors were exposed to 60-Co gamma irradiation with a dose rate of 0.015 Gy/s. Capacitance-voltage (CV) measurements were performed at 1000 kHz before and after radiation exposure with doses of up to 40 Gray. C-V curves of as-deposited Al/Si 3 N 4 /Si MIS capacitor before and after gamma radiation at different doses. C-V curves of Al/Si 3 N 4 /Si MIS capacitor annealed at 700 0 C before and after gamma radiation at different doses.

13. Conclusions Before exposure to gamma irradiation, as-deposited sample shows relatively large V fb shift towards negative voltages indicating a reduction in positive charge buildup due to annealing process. On the other hand, after gamma irradiation at different doses, all samples show a V fb shift toward more negative values being more pronounced in the sample annealed at higher annealing temperature of 700 °C. We attribute this to the structural characteristics of the films, in which the as-deposited sample, having an amorphous network and containing H atoms is metastable, compared with annealed samples making it less affected by irradiation. The more streaking and common feature is observation of radiation hardening after first irradiation in as-deposited and annealed samples which can be used in space and nuclear applications as a radiation hardened device.

14. “If we knew what we were doing it wouldn't be research.” Albert Einstein THANK YOU