1. The Development of a Voluntary Display Energy Certificate Scheme (VolDECs) For Commercial Offices Malcolm Hanna, Technical Director, National Energy Foundation Improving the use of energy in buildings

2. Contents Display Energy Certificates The need for VolDECs The VolDEC solution Pilot Results VolDEC benefits and costs Future developments

3. It’s fairly tangled

5. The issue for Landlords and Tenants No split between Landlord and Tenant Cannot show improvements (or not) in what each control DECs use one benchmark for all offices Many offices are ‘stuck’ at G

6. The Need A Simple entry-level engagement tool To engage building managers and encourage action Improve the benchmarks that underpin all DECs Set standards through an industry-wide scheme Encourage deeper analysis to benefit the whole industry

7. The VolDEC solution

8. Voluntary scheme without government constraints Not for profit, for benefit of the industry, backed by the industry To use authoritative sector specific benchmarks To highlight performance and encourage action To conduct benchmarking research for the industry Soft start the commercial sector into measuring performance The VolDEC solution - aims

9. The VolDEC solution - the offering Easy access, quick, low cost No lodgement, no site visit, no advisory report Use the existing DEC methodology as the basis Use a ‘similar’ (improved) DEC certificate layout Include a certificate quality rating: HIGH/MEDIUM/LOW Better (& improving) benchmarks and categories, working with sectors

10. The VolDEC method Statutory DECVolDEC MethodologyProduced using the methodology described in CIBSE TM47 BenchmarksUses CIBSE TM46 benchmarks. This provides only one benchmark for all office types. Uses ECON19 benchmarks for offices. This provides four different office types plus energy is broken down by end use for each type. Landlord / tenant split Unable to provide a separate landlord tenant DEC in the same building Uses the granular energy breakdown in ECON19 to provide composite landlord and tenant benchmarks for 5 different building scenarios.

11. The VolDEC method

16. What do you need for a VolDEC? Building postcode Floor area Approximate hours of occupancy Annual energy use – landlord & Tenant Data year Main heating fuel type

17. What do you need for a VolDEC Choose office type – closest match Choose building Scenario – closest match

18. What do you need for a VolDEC

19. M

20. M

22. The benefits Provides landlords and tenants with energy performance for areas they control Stand-alone entry level engagement tool simple, easy access, inexpensive Uses robust DEC method, with more appropriate benchmarks Highlights energy performance, a clear driver for improving performance VolDEC process highlights anomalies, the need for further checks Better benchmarks, working with sectors

23. Indicative costs £250 per VolDEC (1-10 buildings) £150 per VolDEC (11-25 buildings) £100 per VolDEC (26-50 buildings) £75 per VolDEC (51+ buildings) Dependent on data format and data quality Excludes sector/client tailoring Excludes any re-runs due to bad data

24. Future developments Water and waste (Environmental VolDEC) Floor by floor (individual tenant VolDEC) Shopping centres (new sector) On-line self-input Annual Benchmarking analysis and organisational reports

25. Malcolm.hanna@nef.org.uk Philjones100@virginmedia.com Improving the use of energy in buildings Acknowledgements Debbie Hobbs, Sustainability Manager, Legal and General Property Adam Fjaerem (formerly JLL) Nigel Brock (NEF)