1. Lander Concepts for MarcoPolo-R S. Ulamec, J. Biele, H.-W. Hübers, A. Herique, T. van Zoest, T.-M. Ho, C. Krause, A. Barucci and P. Michel DLR, Germany, IPAG - UJF, Paris Observatory, LESIA, Côte d'Azur Observatory, France

2. ESA M3 proposed Asteroid Sample Return Mission Under industrial study, Feb. 2012-Feb. 2013: Target: Binary 1996 FG3, 3-6 months stay time Launch window: 2021/2023 and sample return in 2029/Soyuz Single primary spacecraft, carrying: Earth Re-rentry Capsule (ERC) Sample acquisition and transfer system (SAS) Touch and go sampling mechanisms (non-exhaustive list): Brush or cutting wheels Corers Gaseous transport devices Sample device should collect a minimum of 100 g sample (dedicated study starting in July 2012) MarcoPolo-R Baseline mission

3. Dokumentname > 23.11.2004 Background Surface Science Package is in MarcoPolo-R proposal as Optional Payload Various aspects (and possible payload complements) would strongly enhance the scientific outcome of the mission Call for Declaration of Interest in Science Instrumentation Cosmic Vision Mission: MarcoPolo-R Two Lander Proposals (both based on the MASCOT bus) MAPOSSI (LIBS, APX, Camera, IR-spectrometer etc..) FANTINA (Imaging Radar, etc..) Additional Instrument Proposals requiring an SSP All rated „category 2“ (high quality – not nominal P/L) Folie 3 > Vortrag > Autor

4. Dokumentname > 23.11.2004 Folie 4 > Vortrag > Autor Rationale for a Surface Science Package as part of a Sample Return Mission Context measurements Samples would be taken from only a few (or even only one) dedicated sites from the target asteroid. It is important to identify the context of these particular samples as well as to evaluate the variability of possible samples. A mobile lander might even support sampling site selection when investigating several surface areas before the sampling manoeuvre. In situ characterization of surface material : Due to the sampling (e.g. by drilling, grabbing, sputtering etc.) the physical properties (e.g. porosity) of the samples will be modified in a certain respect. Also insertion into a container, as well as accelerations during re-entry and possibly radiation and temperature variations during cruise may cause alteration of material properties. Since the characterization of the original condition on the asteroid, comparative in-situ characterization is important. Global characterization : Since samples can only be collected at a few dedicated areas, the information they provide regarding the global characteristics of the asteroid or comet are limited. A surface station could well close this gap (in particular, together with the main spacecraft). A radar tomographer (see ASSERT) or seismic instruments could fulfil this objective very well. Redundancy At least “unofficially”, a good point.

5. Dokumentname > 23.11.2004 Folie 5 > Vortrag > Autor Designs studied (DLR) Philae (100 kg) Hopper(10-25 kg) MASCOT (10 kg) MASCOT (30, 70 kg) Leonard

6. Dokumentname > 23.11.2004 MarcoPolo-R Proposed Lander Packages On the basis of MASCOT (a ~10kg lander for the Hayabusa 2 mission), landers with various instrument complements are studied as optional payload for MP-R Folie 6 > Vortrag > Autor μOmega CAM MARA MAG MAPOSSI - LIBS, - APX -Thermal Mapper, - Mößbauer Spectrometer, I- R-spectrometer (MicrOmega), - Camera, - optional elements FANTINA -Radar Tomographer - Camera - optional elements LIBS for ExoMars © DLR MicrOmega for MASCOT © IAS Concept of Radar Tomogapher Image: IPAG MASCOT

7. Dokumentname > 23.11.2004 MASCOT Introduction: Objectives MASCOT („Mobile Asteroid Surface Scout“) 10kg mobile surface science package for Hayabusa-2 Measurements of MASCOT PL will accomplish ‘context science’ by complementing remote sensing observations from HY-2 and sample analyses  ground truth info accomplish ‘stand-alone science’ such as geophysics serve as a ‘reconnaissance and scouting’ vehicle to guide the sampling site selection of the main spacecraft In-situ analysis of NEA 1999 JU3 with four scientific instruments I. Wide Angle Camera to obtain multispectral images of the landing site and provide geological context for MASCOT PL II. MicrOmega to determine mineralogic composition and characterize grains size and structure of surface soil samples at μ-scale III. MARA radiometer to map NEO‘s surface temperature to determine the thermal inertia  Yarkovsky effects IV. Magnetometer (MAG) to determine magnetization of the NEO  formation history

8. Dokumentname > 23.11.2004 Configuration (Schematic, Payload Accomodation)

9. Dokumentname > 23.11.2004 Configuration (Mechanical & Electrical Support System)

10. Dokumentname > 23.11.2004 Payload Radiometer Camera Magnetometer MicrOmega

11. Dokumentname > 23.11.2004 MASCOT Payload InstrumentTRLHeritageInstitute; PI/IM images of heritage flight hardware MAG9 MAG of ROMAP on Rosetta Lander (Philae), ESA VEX, Themis Technical University Braunschweig, K.H. Glassmeier / U. Auster MicrOmega6 ESA ExoMars, Russia Phobos GRUNT, ESA Rosetta, ESA ExoMars rover 2018, Rosetta / Philae / CIVA/MI Infrared hyperspectral microscope IAS Paris, Jean-Pierre Bibring / Corinne Evesque MARA radiometer8 (5) MUPUS-TM on Rosetta Lander (Philae); MERTIS-RAD on BepiColombo DLR PF (Berlin); Matthias Grott CAM visible camera 8 ExoMars PanCam heads, Rosetta-ROLIS head, ISS- RokViss head DLR PF (Berlin); Ralf Jaumann / Nicole Schmitz

12. Dokumentname > 23.11.2004 From Top (w/o lid) From -X From bottom From +Y MASCOT Overview: Configuration

13. Dokumentname > 23.11.2004 Folie 13 > Vortrag > Autor Akkommodation von MASCOT auf dem Hayabusa-2 RFZ MASCOT is a contribution to JAXA by 4 DLR Institutes and CNES Mounting to main S/C via a mechanical and electrical support system (MESS) MSC is attached to MESS via fasteners MSC will be deployed under an angle > 15° wrt the –Y axes of the mother S/C MASCOT is ejected via non explosive actuators & spring Electrical connection to HY-2 via umbilical MASCOT aboard Hayabusa 2

14. Dokumentname > 23.11.2004 Folie 14 > Vortrag > Autor Radiometer Inclination angle = 45° Radiometer Sensor Beam Ground Wide Angle Camera Inclination = 30° MASCOT μOmega CAM MARA MAG

15. Dokumentname > 23.11.2004 Mission Analysis Landing constraints: landing velocity limited to 50% escape velocity  3 cm/s separation velocity for descent from h = 100 m Surface temperature driving landing site selection Landing time: release around noon (subsolar point +- TBD deg)

16. Dokumentname > 23.11.2004 Folie 16 > Vortrag > Autor MASCOT delivery + surface Ops

17. Dokumentname > 23.11.2004 MAPOSSI Coordinator: Heinz-Wilhelm Hübers (DLR-PF, Berlin) MASCOT-type Lander with P/L emphasizing on analytical measurements LIBS, APX, Thermal Mapper, Mößbauer Spectrometer, IR- spectrometer (MicrOmega), Camera, optional elements Mobility / Hopping Lifetime tbd Folie 17 > Vortrag > Autor LIBS laser (left) and LIBS echelle spectrometer (right). Both were developed for the ExoMars breadboard.

18. Dokumentname > 23.11.2004 MAPOSSI 2 Folie 18 > Vortrag > Autor MicrOmega (IAS): Block diagram and (center, right) possible implementation of the instrument/sensor head New APXS instrument (50 x 50 x 50 mm³); (right) APXS XRF-spectrum of the meteorite Murchison, taken with the ROSETTA instrument.

19. Dokumentname > 23.11.2004 MicrOmega – General Design Imaging optics MOW + L1 + L2 + L3 Imaging optics MOW + L1 + L2 + L3 Detector + cryo-cooler 0.9 – 3.5 µm (goal) Detector + cryo-cooler 0.9 – 3.5 µm (goal) Source White light Source White light Monochromator AOTF + RF synthesizer 26 – 102 Mhz Monochromator AOTF + RF synthesizer 26 – 102 Mhz Illumination optics L1+M1+L2 Illumination optics L1+M1+L2 sample

20. Dokumentname > 23.11.2004 FANTINA* Coordinator: Alain Herique (IPAG, Grenoble) Bi-static Radar for global characterization (+ tbd optional P/L) Heritage from CONSERT (Rosetta) and MASCOT (bus) Long-lived Folie 20 > Vortrag > Autor * Fantina was a daugter of Marco Polo; Fathom Asteroids Now: Tomography and Imagery of a NEA

21. Dokumentname > 23.11.2004 Volume Properties 15x15x6 cm (+ electronic unit : 15x15x7 cm) Mass Properties and Budget: 3 kg (including 20% margin) Power and Energy Budgets: Maximum power consumption is 24 W. Data budget: 1Mo for one sample analysis. ILMA Ion Laser Mass Analyser Ultra High Resolution Mass spectrometer for mineral and organic analysis Resolution ~ 100 000 Best achieved in space so far: ~ 3 000 (ROSINA onboard ROSETTA) Assessment study in 2012 TRL 5 in 2014/2015

22. Dokumentname > 23.11.2004 MSM – Magnetic susceptibility meter for asteroid regolith composition studies Purpose: Characterization of asteroid regolith composition and its (in)homogeneity through magnetic susceptibility measurements. Search for space weathering products (nanophase iron). Regolith temperature measurement. Design: Single coil concept Low mass (~ 100 g) Compact and robust (~ 5 cm, encapsulated coil) Low power consumption (< 50 mW) Fast measurement (~2-3 s) Status: The design is based on proven commercial product. Development of a space qualified version is ongoing. Instrument performance in near asteroid environment is being evaluated.

23. Dokumentname > 23.11.2004 Folie 23 > Vortrag > Autor Various „Classes“ of Landers to be considered Sampling Lander (not analyzed here) Large, longlived option (like Philae) In the 100 kg range; 25 kg scientific payload Lifetime in the order of months (nota: Philae may die due to dust & thermal environment, this would not apply for a NEO mission) Smaller options (as studied for the „early MASCOT“) In the 30 to 70 kg range; 10 to 15 kg payload Very small packages (like actual MASCOT design) 10 kg overall mass; 3 kg payload MASCOT design is short-lived (~16 hours) MASCOT design allows mobility MINERVA type rover (see presentation by T. Yoshimitsu) ~1 kg

24. Dokumentname > 23.11.2004 Upright Mechanism Folie 24 > Vortrag > Autor F. Herrmann / DLR-RM

25. Dokumentname > 23.11.2004 Folie 25 > Vortrag > Autor Summary Surface Science Packages increase significantly the overall value of any asteroid mission ! (…explicitly also Sample Return missions) Surface packages, based on MASCOT, have been proposed with various payload complements Teams are working on instruments and (10kg) lander accommodation. Industrial studies shall include lander accommodation! A final selection of lander and payload can be taken after MP-R selection and AO process