1. Exploded CAD Assembly Models © 2012 Project Lead The Way, Inc.

2. Exploded CAD Assembly Models Also named –Pictorial Assembly –Exploded View –Exploded Assembly –Exploded Pictorial –Exploded Assembly Presentation

3. Exploded CAD Assembly Models Uses –Repair manuals –Owner’s manuals –Sales promotion –Customer self- assembly –Maintenance procedures

4. Direction Button Specifies direction or axis of rotation of tweak Click Direction button, then select an edge, face, or feature of any component in the graphics window to set the direction triad for the tweak

5. Components Button Selects the components to tweak. Click the Components button, then select the components in the graphics window or browser To remove a component from the group, press and hold the Ctrl key as you select

6. Trail Origin Button Sets origin for the trail Click the Trail Origin button, then click in the graphics window to set the origin point If trail origin is not specified, then it is placed at the center of mass for the part

7. Display Trails Sets display of trails Select box to display the tweak trails for selected components Clear the check box to hide trails Turn trail visibility on or off by right clicking on tweak in the browser

8. Linear Transformations Sets type of tweak to Linear Click to select Linear, select the axis, enter the distance, and click the Apply button

9. Rotational Transformations Sets tweak type as Rotational Click Rotational, select rotation axis, enter degrees of rotation, and click Apply button

10. Direction of Transformations Specifies the direction for a linear tweak or the axis for a rotational tweak Select desired coordinate, then enter distance or rotation angle

11. Create Tweak Creates a tweak using the current settings in the dialog box Click to apply settings and create the tweak

12. Edit Existing Trail Initiates edit mode for existing tweaks Click to initiate the edit, select the tweak in the graphics window, then change the desired settings

13. Edit Existing Trail Clears the settings in the dialog box so that you can set up another tweak Tip: Click open space in the browser to clear only the component selection

14. Procedure Click Create View button Click Explore Directories button Select Assembly file to use Click OK

15. Tweak Components Selected Assembly will be placed in graphics window as an isometric view Select Tweak Components

16. Establish an Axis Select an edge, face, or feature of any component in the graphics window to set the direction triad for the tweak For rotational transformations, it may be best to establish the axis in the center of the part to be tweaked

17. Direction of Transformation To set the direction of the transformation, click on either the button in the dialog box or the desired axis of the triad.

18. Select the Components Select the component or group of components in the graphics window or browser To remove a component from the group, press and hold the Ctrl key while selecting

19. Enter the Values Enter desired distance of tweak Click on green arrow button to confirm tweak If tweak is not desired size, then change value and click on confirm arrow

20. Enter the Values Click on Clear button Begin process again by establishing a new axis