1. Mars RT Pro On-Line Series UPS

2. Content Introduction of MP Series System Block Diagram
Product Features
Functions Explanations
Product Specifications
Q&A

3. Introduction of MP Series
Mars – RT Pro
Model
MP　 1K( X/C )
2K( X/C )
3K( X/C )
Capacity : 1000VA, 2000VA, 3000VA
Servers in Rack / Tower Convertible
Networking & VOIP Telecom Equipment
Sensitive Electronic Equipment in Industrial Environment

4. True Online Double Conversion for Various Applications
System Block Diagram
True Online Double Conversion for Various Applications

5. Product Features True On-line Double Conversion Topology
Fully High Performance DSP Control
Flexible Rack/Tower Application
Input Frequency 45-65Hz
Wide Range Input Window from 120~288Vac
High Input Power Factor & Low Current THD
Programmable Receptacles
Versatile Interfaces Options
Hot-Swappable Battery
Bigger Charger & Extended Battery Connector
Galvanic Isolation Transformer Models are Available

6. Functions Explanations
LED Indicators:
Overload
Fault
Site Wiring Fault
Battery Weak/Bad
Self-test
Programmable Outlet1
Programmable Outlet2
Bypass Mode
Battery Mode
Line Mode
Control Keypads:
On Key
Off Key
Test & Alarm Silence Key 1 2 3 4 5 6 7 8 9 10 11 12 13

7. LED Indicators:
LCD
Utility
Programmable Outlet1
Programmable Outlet2
Bypass Range
Fault
Control Keypads:
ON Key &Alarm Silence Key
OFF Key
Function Key
Down Key
Up Key
Enter Key

8. Real Panel Explanation (1kVA)         
Real Panel Explanation (1kVA)
USB Comm. Port
RS-232 Comm. Port
EPO
External Battery Connector
Socket for connection to AC-power source
Input circuit breaker
Slot for Communications-card option
Two Programmable Outlets
Outlets
Fan

9. Real Panel Explanation (2kVA)1 2 3 4 5 6 7 8 9 10
Real Panel Explanation (2kVA)
1 USB Comm. Port
2 RS-232 Comm. Port
3 EPO
4 External Battery Connector
5 Socket for connection to AC-power source
6 Input circuit breaker
7 Slot for Communications-card option
8 Outlets
9 Two Programmable outlets
10 Fan

10. Real Panel Explanation (3kVA)1 2 3 4 5 6 7 8 9 10 11 12
Real Panel Explanation (3kVA)
1 USB Comm. Port
2 RS-232 Comm. Port
3 EPO
4 External Battery Connector
5 Socket for connection to AC-power source
6 Input circuit breaker
7 Slot for Communications-card option
8 Outlets
9 Two Programmable outlets
10 Output Breaker for two Power Programmable outlets
11 Output circuit breakers
12 Fan

11. External Communication Interface
Standard Unit : RS232 and USB interface
Optional in Slot : 1. WEB/SNMP Card 2. True Relay Contact Card 3. RS485 Card

12. Communication Software
Emily
UPSilon 2000

13. Emergency Power Off (EPO)
Emergency shutdown control through the EPO

14. Hot-Swappable Battery Removable Battery Bank
Battery Replacement from Front Panel Without Hazard Risk to Users
Backup Time (Full Load):
1kVA
> 7 min.
2kVA
> 7 min
3kVA
> 5 min.

15. Large Built-in Charger
Fastest Charging Internal Battery to 90% in 3 hours.
1.8A~2.7A Charger Built-in for Immediate Run Time Expansion.

16. Nominal System Voltage
Solutions for Long Runtime
Increased Runtime for Critical Applications
Extended Runtime Capabilities with Multiple External Battery Bank (Optional)
UPS
1KVA
2KVA/3KVA
Battery Bank SN
BBC0007
BBC12K0009
Nominal System Voltage
36VDC
72VDC
Dimensions W x D x H, mm
Unit
440 x 650 x 88
Shipping
560 x 833 x 228
Weight, kg 38
44.6 46
52.6

17. Battery Run Times LOAD MP-RT 1000 1 x EXB 2 x EXB 140w 01:06:06
05:51:10
10:32:06
280w
00:27:45
03:01:28
05:26:39
420w
00:14:24
02:02:21
03:40:13
560w
00:10:19
01:32:17
02:46:06
700w
00:07:09
01:09:43
02:13:20

18. Battery Run Times LOAD MP-RT 2000 1 x EXB 2 x EXB 280w 01:06:06
03:30:42
05:51:10
560w
00:27:45
01:48:53
03:01:28
840w
00:14:24
01:09:05
02:02:21
1120w
00:10:19
00:52:07
01:32:17
1400w
00:07:09
00:33:59
01:09:43

19. Battery Run Times LOAD MP-RT 3000 1 x EXB 2 x EXB 420w 00:59:11
03:08:39
05:14:25
840w
00:19:03
01:37:09
02:41:35
1260w
00:12:11
01:01:34
01:49:02
1680w
00:08:25
00:46:25
01:17:21
2100w
00:05:26
00:30:15
01:02:04

20. Front and Rear Panel Descriptions
1.Screw Cover
To replace batteries, please remove the screw
covers and the screws inside the covers.
2. EXT.BAT. +/-
To the DC terminal of the 2nd(or next) battery bank
connected.
3. UPS BAT. +/-
To the UPS DC terminal or the next battery bank.
4. DC Breaker
1. Over-current Protection Breaker
2. To easy swappable battery, please put the position of the breaker in “O” position. In case there is 2nd(or next) battery bank connected with the battery bank, the DC voltage from the UPS Bat.+/- will flow through without any interruption to
the 2nd Battery Bank.
5. AC Inlet for Charger
AC Inlet for Charger. Optional.

21. Optional External Bypass Switch
Easy Installation with ready-to-go inlets & outlets.
Break before Make Switch(3ms)

22. Operating Illustration

23. Programmable Receptacles Current Monitoring
Output Receptacles Enable/Disable
Ablerex own-developed software for Windows Platform
Increased runtime for critical applications:
Load shedding with programmable outlets.

24. Setting Software
User Personalization
Output Voltage Configurations
UPS Modes
Output Voltage Fine Tuning
Bypass Voltage Tolerances
Synchronized Frequency Window
Company Name
UPS Model
UPS Capacity
Calibration Setting
(Manufacturing setting only)

25. Programmable Outlet Setting
Outlet Turn On After Turn on UPS
Outlet Turn Off After AC Failure
Outlet Turn On After AC Recovered
Outlet Turn Off When Battery Lower than
Outlet Turn Off When Overload
Manual Control Switch
Programmable Outlet On/Off

26. Internal structure(1kVA)
 [B1]加入
Internal structure
(2/3kVA)
Internal structure(1kVA)
1/1.5KVA 
2KVA
3KVA
Driver Board(1)
110V
MPAD2XX
MPCD2XX
220V
Driver Board(2)
N/A
MPCD1XX
MPCD3XX
Control Board
MPAI0XX
EMI filter Board
MPAF2XX
MPCF2XX
LED Display
MPAM2XX

27. MPAD2XX PCB
(1/1.5KVA) 

28. MPCD2XX PCB(2K/3KVA) Work power Charger circuit Inverter IGBT
Inverter choke
Charger circuit
Work power
Feedback Relay
MPCD2XX PCB(2K/3KVA)

29. MPCD3XX PCB (2/3KVA -220V System)
Boost MOSFET
PFC IGBT
PFC choke
Boost Transformer
+BUS

30. Product Specifications
INPUT
Model
MP-RT 1000
MP-RT 1500
MP-RT 2000
MP-RT 3000
Voltage Window
120/140/160~288Vac
60/70/80~144Vac
Frequency
45~65Hz
Phase/Wire
Single, Line + Neutral + Ground
Power Factor
Up to 0.99 at 100% Linear Load
OUTPUT
Rated Voltage
200/208/220/230/240Vac Selectable
100/110/115/120/127Vac Selectable
Voltage Regulation
≦ +/-1% until low battery warning
Capacity (VA/W)
1000/700
1500/1050
2000/1400
3000/2100
Rated Power Factor
0.7/0.8* Lagging
Wave Form
≦3% THD at linear load; ≦ 7% at Non-linear load
Frequency [Synchronized Range]
1Hz or 3Hz
Transfer Time
0ms
Crest Factor
3:1
Efficiency (AC to AC, Normal)
Up to 85%
Up to 88%
Efficiency (DC to AC)
Up to 83%
DC Start
Yes

31. Sealed Lead Acid Maintenance Free
BATTERY
Model
MP-RT 1000
MP-RT 1500
MP-RT 2000
MP-RT 3000
Backup Time
>7 min.
>5 min.
Type
Sealed Lead Acid Maintenance Free
Quantity
3pcs
6pcs
Capacity
7.2AH
9AH
Voltage
36Vdc
72Vdc
Recharge Time
3 hours to 90%
Charger Current
1.8A
2.1A
2.7A

32. PHYSICAL
Model
MP1000X/MP1000C
MP2000X/MP2000C
MP3000X/MP3000C
Dimensions ( W x D x H ) mm/inch
440 x132 x405/
17.3x5.2x16
440 x176 x520/
17.3x7.0x20.5
Input Connection
(230Vac Only)
IEC
IEC320-C14
IEC320-C20
Output Connection
6 x IEC320-C13
4 x IEC320-C13
1 x IEC320-C19
Weight (Kgs/lbs)
w/o transformer w/batteries
15.5/34.2
32.0/70.5
33.0/72.7
w/o transformer w/200W
7.9/17.4
16.7/36.8
17.7/39.0
w/transformer w/batteries
22.0/48.6
42.0/92.6
46.0/101.4
w/transformer w/200W
14.4/31.8
26.7/58.9
30.7/67.7

33. Q & A