Presentation is loading. Please wait.

Presentation is loading. Please wait.

NOvA Module Manifolds & Bottom Plates Tom Chase University of Minnesota February 2006.

Similar presentations


Presentation on theme: "NOvA Module Manifolds & Bottom Plates Tom Chase University of Minnesota February 2006."— Presentation transcript:

1 NOvA Module Manifolds & Bottom Plates Tom Chase University of Minnesota February 2006

2 Overview Manifold architecture Manifold assembly Scintillator overflow containment Bottom plate Leak testing

3 Manifold Draft Specifications

4 Manifold Architecture The largest surface area part is a low-cost extrusion

5 Reminiscent of MINOS Side Out Manifold

6 Nested Manifolds

7 Manifold Interior

8 Manifold Scallop Adapter Straight slots for extruded parts Bottom has scalloped profile of main extrusion Top has profile of underside of manifold parts Enables mounting extruded manifold parts on scalloped extrusion profile Decouples extrusion & manifold: changes in extrusion affect only 1 manif part

9 Fiber Raceways Facilitate threading.8 mm d fibers into the optical connector Virtually eliminate registration errors Protect fibers & maintain adequate bend radii

10 Nominal Assembly Sequence Pre-assemble snout bottom, end cap bottom & bottom raceway to scallop adapter Install scallop adapter on main extrusion String fibers down length of extrusions Thread & pot manifold fibers Assemble snout top, end cap top & manifold extrusion Fly cut fiber ends Leak test & light test

11 Manifold Overflow Tank The manifold extrusion serves as the overflow tank on vertical modules

12 Bottom Plate Draft Specifications

13 Machined Bottom Plate Center channel enables fluid to flow from cell to cell Side channels prevent adhesive from clogging center channel

14 Injection Molded Bottom Plate Potential alternative to machining

15 High-Speed Module Leak Tester Pressurized air entering module can be seen as bubbles

16 Summary Manifold has been designed for durability, rapid assembly and low cost Raceways guide and protect fibers Base plate is similar to scallop adapter; may enable economies in manufacturing “Bubble bottle” provides potential for rapid leak testing of finished module


Download ppt "NOvA Module Manifolds & Bottom Plates Tom Chase University of Minnesota February 2006."

Similar presentations


Ads by Google