Presentation is loading. Please wait.

Presentation is loading. Please wait.

Trevor Muddimer WorkplaceSense.co.uk. The problem… Generally, around 10% of a companies electricity is used to run the air compressor(s). Leakage ranges.

Similar presentations


Presentation on theme: "Trevor Muddimer WorkplaceSense.co.uk. The problem… Generally, around 10% of a companies electricity is used to run the air compressor(s). Leakage ranges."— Presentation transcript:

1 Trevor Muddimer WorkplaceSense.co.uk

2 The problem… Generally, around 10% of a companies electricity is used to run the air compressor(s). Leakage ranges from 10% to 30% of the Compressed Air, with worst cases, up to ~50%. Leak repairs are usually simple – jubilee pipe clips, loose joints, with hardware repairs being minimal.

3 Visible leaks

4 Ultrasonic detection… Ultrasonic sound detection is needed, because on average only ~5% of leaks are loud enough to hear. It follows that 95% of leaks are undetected, hence remain unrepaired We also locate gas leaks such as Welding gas, Argon, Helium, Nitrogen, or Co2

5 Ultrasonic detection.

6 To Date… Since 2011, we have found nearly 1,000 leaks in 75 companies. (running 109 compressors) Total of £233,000 per year in estimated savings Total Emissions saved =1,103 Tonnes CO 2 equivalent to 1,103 hot air balloons. Saving £23,500 per year for one large Company!

7 Survey & Report service: Our Charges are aligned to the survey area Our Report, shows estimated Cost per Leak per Year, and the annual total – allowing prioritised repairs. Our Leak Cost calculations use the leak Sound level ( dB ), Air pressure ( psi or bar ), Availability period (hours per year), and Cost per Kwh (typically 9-12p/Kwh).

8 Questions?


Download ppt "Trevor Muddimer WorkplaceSense.co.uk. The problem… Generally, around 10% of a companies electricity is used to run the air compressor(s). Leakage ranges."

Similar presentations


Ads by Google