Presentation is loading. Please wait.

Presentation is loading. Please wait.

Processing of large document collections

Similar presentations


Presentation on theme: "Processing of large document collections"— Presentation transcript:

1 Processing of large document collections
Fall 2002, Part 3

2 Text compression Despite a continuous increase in storage and transmission capacities, more and more effort has been put into using compression to increase the amount of data that can be handled no matter how much storage space or transmission bandwidth is available, someone always finds ways to fill it with

3 Text compression Efficient storage and representation of information is an old problem (before the computer era) Morse code: uses shorter representations for common characters Braille code for the blind: includes contractions, which represent common words with 2 or 3 characters

4 Text compression On a computer: changing the representation of a file so that it takes less space to store or less time to transmit original file can be reconstructed exactly from the compressed representation different than data compression in general text compression has to be lossless compare with sound and images: small changes and noise is tolerated

5 Text compression methods
Huffman coding (in the 50’s) compressing English: 5 bits/character Ziv-Lempel compression (in the 70’s) 4 bits/character arithmetic coding 2 bits/char (more processing power needed) prediction by partial matching (80’s)

6 Text compression methods
Since 80’s compression rate has been about the same improvements are made in processor and memory utilization during compression also: amount of compression may increase when more memory (for compression and uncompression) is available

7 Text compression methods
Most text compression methods can be placed in one of two classes: symbolwise methods dictionary methods

8 Symbolwise methods Work by estimating the probabilities of symbols (often characters) coding one symbol at a time using shorter codewords for the most likely symbols (in the same way as Morse code does)

9 Symbolwise methods variations differ mainly in how they estimate probabilities for symbols the more accurate these estimates are, the greater the compression that can be achieved to obtain good compression, the probability estimate is usually based on the context in which a symbol occurs

10 Dictionary methods compress by replacing words and other fragments of text with an index to an entry in a ”dictionary” compression is achieved if the index is stored in fewer bits than the string it replaces

11 Symbolwise methods Modeling Coding estimating probabilities
there does not appear to be any single ”best” method Coding converting the probabilities into a bitstream for transmission well understood, can be performed effectively

12 Models Compression methods obtain high compression by forming good models of the data that is to be coded the function of a model is to predict symbols e.g. during the encoding of a text , the ”prediction” for the next symbol might include a probability of 2% for the letter ’u’, based on its relative frequency in a sample of text

13 Models The set of all possible symbols is called the alphabet
the probability distribution provides an estimated probability for each symbol in the alphabet

14 Encoding, decoding the model provides the probability distribution to the encoder, which uses it to encode the symbol that actually occurs the decoder uses an identical model together with the output of the encoder to find out what the encoded symbol was

15 Information content of a symbol
The number of bits in which a symbol s should be coded is called the information content I(s) of the symbol the information content I(s) is directly related to the symbol’s predicted probability P(s), by the function I(s) = -log P(s) bits

16 Information content of a symbol
The average amount of information per symbol over the whole alphabet is known as the entropy of the probability distribution, denoted by H:

17 Information content of a symbol
Provided that the symbols appear independently and with the assumed probabilities, H is a lower bound on compression, measured in bits per symbol, that can be achieved by any coding method

18 Information content of a symbol
If the probability of symbol ’u’ is estimated to be 2%, the corresponding information content is 5.6 bits if ’u’ happens to be the next symbol that is to be coded, it should be transmitted in 5.6 bits

19 Information content of a symbol
predictions can usually be improved by taking account of the previous symbol if a ’q’ has just occurred, the probability of ’u’ may jump to 95 %, based on how often ’q’ is followed by ’u’ in a sample of text information content of ’u’ in this case is bits

20 Information content of a symbol
Models that take a few immediately preceding symbols into account to make a prediction are called finite-context models of order m m is the number of previous symbols used to make a prediction

21 Static models There are many ways to estimate the probabilities in a model we could use static modelling: always use the same probabilities for symbols, regardless of what text is being coded compressing system may not perform well, if different text is received e.g. a model for English with a file of numbers

22 Semi-static models One solution is to generate a model specifically for each file that is to be compressed an initial pass is made through the file to estimate symbol probabilities, and these are transmitted to the decode before transmitting the encoded symbols this is called semi-static modelling

23 Semi-static models Semi-static modelling has the advantage that the model is invariably better suited to the input than a static one, but the penalty paid is having to transmit the model first, as well as the preliminary pass over the data to accumulate symbol probabilities

24 Adaptive models Adaptive model begins with a bland probability distribution and gradually alters it as more symbols are encountered as an example, assume a zero-order model, i.e., no context is used to predict the next symbol

25 Adaptive models Assume that a encoder has already encoded a long text and come to a sentence: It migh now the probability that the next character is ’t’ is estimated to be 49,983/768,078 = 6.5 %, since in the previous text, 49,983 characters of the total of 768,078 characters were ’t’

26 Adaptive models Using the same system, ’e’ has the probability 9.4 % and ’x’ has probability 0.11 % the model provides this estimated probability distribution to an encoder the decoder is able to generate the same model since it has the same probability estimates as the encoder

27 Adaptive models For a higher-order model, such as a first-order model, the probability is estimated by how often that character has occurred in the current context in a zero-order model earlier, a symbol ’t’ occurred in a context: It migh , but the model made no use of the characters of the phrase

28 Adaptive models A first-order model would use the final ’h’ as a context with which to condition the probability estimates the letter ’h’ has occurred 37,525 times in the prior text, and 1,133 of these times it was followed by a ’t’ the probability of ’t’ occurring after an ’h’ can be estimated to be 1,133/37,525=3.02 %

29 Adaptive models For ’t’, a prediction of 3.2% is actually worse than in the zero-order model because ’t’ is rare in this context (’e’ follows ’h’ much more often) second-order model would use the relative frequency that the context ’gh’ is followed by ’t’, which is the case in 64,6%

30 Adaptive models Good: robust, reliable, flexible
Bad: not suitable for random access to compressed files a text can be decoded only from the beginning: the model used for coding a particular part of the text is determined from all the preceding text -> not suitable for full-text retrieval

31 Coding Coding is the task of determining the output representation of a symbol, based on a probability distribution supplied by a model general idea: the coder should output short codewords for likely symbols and long codewords for rare ones symbolwise methods depend heavily on a good coder to achieve compression

32 Huffman coding A phrase is coded by replacing each of its symbols with the codeword given by a table Huffman coding generates codewords for a set of symbols, given some probability distribution for the symbols the type of code is called prefix-free code no codeword is the prefix of another symbol’s codeword

33 Huffman coding The codewords can be stored in a tree (a decoding tree)
Huffman’s algorithm works by constructing the decoding tree from the bottom up

34 Huffman coding Algorithm
create for each symbol a leaf node containing the symbol and its probability two nodes with the smallest probabilities become siblings under a new parent node, which is given a probability equal to the sum of its two children’s probabilities the combining operation is repeated until there is only one node without a parent the two branches from every nonleaf node are then labeled 0 and 1

35 Huffman coding Huffman coding is generally fast for both encoding and decoding, provided that the probability distribution is static adaptive Huffman coding is possible, but needs either a lot of memory or is slow coupled with a word-based model (rather than character-based model), gives a good compression

36 Dictionary models Dictionary-based compression methods use the principle of replacing substrings in a text with a codeword that identifies that substring in a dictionary dictionary contains a list of substrings and a codeword for each substring often fixed codewords used reasonable compression is obtained even if coding is simple

37 Dictionary models The simplest dictionary compression methods use small dictionaries for instance, digram coding selected pairs of letters are replaced with codewords a dictionary for the ASCII character set might contain the 128 ASCII characters, as well as 128 common letter pairs

38 Dictionary models Digram coding…
the output codewords are eight bits each the presence of the full ASCII character set ensures that any (ASCII) input can be represented at best, every pair of characters is replaced with a codeword, reducing the input from 7 bits/character to 4 bits/characters at worst, each 7 bit character will be expanded to 8 bits

39 Dictionary models Natural extension:
put even larger entries in the dictionary, e.g. common words like ’and’, ’the’,… or common components of words like ’pre’, ’tion’… a predefined set of dictionary phrases make the compression domain-dependent or very short phrases have to be used -> good compression is not achieved

40 Dictionary models One way to avoid the problem of the dictionary being unsuitable for the text at hand is to use a semi-static dictionary scheme constuct a new dictionary for every text that is to be compressed overhead of transmitting or storing the dictionary is significant decision of which phrases should be included is a difficult problem

41 Dictionary models Solution: use an adaptive dictionary scheme
Ziv-Lempel coders (LZ77 and LZ78) a substring of text is replaced with a pointer to where it has occurred previously dictionary: all the text prior to the current position codewords: pointers

42 Dictionary models Ziv-Lempel…
the prior text makes a very good dictionary since it is usually in the same style and language as upcoming text the dictionary is transmitted implicitly at no extra cost, because the decoder has access to all previously encoded text

43 LZ77 Key benefits: relatively easy to implement decoding can be performed extremely quickly using only a small amount of memory suitable when the resources required for decoding must be minimized, like when data is distributed or broadcast from a central source to a number of small computers

44 LZ77 The output of an encoder consists of a sequence of triples, e.g. <3,2,b> the first component of a triple indicates how far back to look in the previous (decoded) text to find the next phrase the second component records how long the phrase is the third component gives the next character from the input

45 LZ77 The components 1 and 2 constitute a pointer back into the text
the component 3 is actually necessary only when the character to be coded does not occur anywhere in the previous input

46 LZ77 Encoding for the text from the current point ahead:
search for the longest match in the previous text output a triple that records the position and length of the match the search for a match may return a length of zero, in which case the position of the match is not relevant search can be accelerated by indexing the prior text with a suitable data structure

47 LZ77 limitations on how far back a pointer can refer and the maximum size of the string referred to e.g. for English text, a window of a few thousand characters the length of the phrase e.g. maximum of 16 characters otherwise too much space wasted without benefit

48 LZ77 The decoding program is very simple, so it can be included with the data at very little cost in fact, the compressed data is stored as part of the decoder program, which makes the data self-expanding common way to distribute files


Download ppt "Processing of large document collections"

Similar presentations


Ads by Google