1. CALSET COMPOSITE WARMER ADDENT, 43 MIRY BROOK RD., DANBURY CT. 06810 PHONE: 203-778-0200 WEB: WWW.ADDENT.COM

2. BENEFITS OF WARMING COMPOSITE 1.INCREASES DEPTH OF CURE, MAKES COMPOSITE EASIER TO EXTRUDE AND BETTER ADAPT TO CAVITY WALLS 2.IMPROVES COMPOSITE FLOW BY 68%, AND SHORTENS CURING TIME BY OVER 50% 3.REDUCES MICROLEAKAGE 4.IMPROVES PHYSICAL PROPERTIES 5.HEATS COMPOSITE INSTRUMENTS FOR IMPROVED MARGINAL ADAPTATION 6.CAN USE COMPOSITE INSTEAD OF FLOWABLE AS A BASE LINER 7.CALSET HEATS TO 98◦F, 130◦F, AND 155◦F References available at www.addent.com

3. CALSET TRI-TRAY COMPOSITE WARMER CALSET TRI-TRAY HOLDS AND WARMS 2 FINISHING INSTRUMENTS HOLDS AND WARMS 3 SPARE COMPULES WARMS COMPULE IN COMPOSITE DISPENSER (COMAX BY ADDENT IS SHOWN IN PICTURE)

4. ACCESSORY TRAYS FOR CALSET PORCLAIN VENEER TRAY VENEER TRAY ALLOWS CEMENATION USING WARM COMPOSITE. ANESTHETIC TRAY ANESTHETIC INJECTED AT BODY TEMPERATURE IS MORE COMFORTABLE FOR THE PATIENT

5. ACCESSORY TRAYS FOR CALSET SYRINGE TRAY HOLDS AND WARMS UP TO 7 COMPOSITE SYRINGES

6. FREQUENTLY ASKED QUESTIONS Q.WHAT TEMPERATURE SHOULD I USE TO HEAT COMPOSITE? A.COMPOSITE SHOULD BE WARMED TO 155◦F. DEPRESS THE ON BUTTON 3 TIMES. THE RED BLINKING LED WILL REMAIN SOLID WHEN THE TEMPERATURE IS REACHED. Q.CAN COMPOSITE BE LEFT IN THE CALSET ALL DAY? A.YES Q.WHAT EFFECT DOES HEAT TREATMENT WITH CALSET HAVE ON POLYMERIZATION SHRINKAGE? A. ALL COMPOSIES SHRINK IN THE COURSE OF POLYMERIZATION TO A MAXIMUM BASED ON THEIR PROPERTIES. HEAT GETS THE MATERIAL TO REACH MAXIMUM POLYMERIZATION WITH LOWER LIGHT LEVELS AND IN LESS TIME.

7. FREQUENTLY ASKED QUESTIONS Q.HOW LONG DOES IT TAKE TO WARM THE COMPOSITE? A.INITIALLY IT TAKES 14 MINUTES TO WARM THE UNIT. IT TAKES 3 MINUTES TO WARM COMPOSITE. Q.WHY SHOULD I USE WARMED COMPOSITE INSTEAD OF FLOWABLE? A.STUDIES SHOW REDUCTION IN MICROLEAKAGE, REDUCED STRESS AND GREATER DEPTH OF CURE. Q.DOES HEATING COMPOSITE DAMAGE THE PULP? A.NO. THERE IS NO DANGER TO THE PULP. Visit www.AdDent.cm for more informationwww.AdDent.cm