1. Introduction
Menang Nusantara Sdn Bhd was incorporated in Malaysia on the 30th March 1995 with its principal activity in business is manufacturing of car floor coverings and compartments for the automotive industry.

2. Certifications ISO 9002 Approaching ISO TS 16949:2002
Achieved certification on November 2001, and constantly maintaining the standard through yearly audits by SIRIM QAS.
Approaching ISO TS 16949:2002
Currently undergoing process of achieving this standard with help from appointed consultants. Targeted to achieve certification by End 2007.

3. Company Background Address Telephone Numbers Fax Number
Lot 9257B, Jln. Balakong, Balakong, Selangor
Telephone Numbers
, ,
Fax Number
Authorised Capital : RM 5,000,000
Paid Up Capital : RM 1,499,850

4. Shareholders & Board of Directors
Abdul Razak bin Montel
Wong Cheong Chee
Rorzlan Bin Adam
Lee Khoon Chong
Board of Directors
Abdul Razak bin Montel
Wong Cheong Chee
Wong Sai Hou
Wong Keat Yee

5. Bankers Reference RHB Bank Berhad
No.1 Jln Tanming Kanan 2, Tmn. Tanming Jaya, Balakong, Selangor
Tel No :
Malayan Banking Berhad
14-22 Jln. Kepayang, Off Jln. Meru, Klang,
Selangor
Tel No :

6. Vision
Menang Nusantara Sdn Bhd plans to provide clients a one-stop center for NVH (Noise, Vibration & Heat) Insulation & Trim parts as well as total customer satisfaction by continuous improvements to our systems and technologies.

7. To Increase the range of products to customers
Current Product Line-ups
Hood, Firewalls, Pad Dash Panels, Spare Wheel Covers, Insulation Padding, Door Trims
Potential New Product Line-ups
Carpet Floorings, Parcel Shelf, Deck lids, Trim Trunk Sides, Wheel House Liners, Tunnel Insulators.
All products are manufactured using the same methods, technologies and quality system, which the company already possessed the needed facilities and system. Initial material sourcing for the new products have been finalized and identified suppliers are ready to commence production. Some of the products have current suppliers in the industry, therefore, the company is making effort to penetrate the industry through better cost and quality.

8. Testing Capabilities
All automotive parts have to pass stringent test requirements in order to be qualified to be used inside a vehicle for the comfort & safety of passengers. Menang Nusantara Sdn Bhd uses well known and qualified 3rd party test labs (listed below) to conduct testing on our parts to meet the requirements.
SIRIM QAS BHD
PSB TEST (M) SDN BHD ( Test Lab in Singapore )
CAR LABORATORY SDN BHD

9. Customers CURRENT CUSTOMERS POTENTIAL NEW CUSTOMERS PROTON PERODUA
MALAYSIAN TRUCKS & BUSES
TCMA ( NISSAN)
NAZA ( KIA & Others)
POTENTIAL NEW CUSTOMERS
HONDA
ASSB ( TOYOTA )
HYUNDAI SIME-DARBY
DAIMLER CHRYSLER
BMW

10. Current Supplied Products
PROTON
Pad Dash Panel
Iswara
Gen 2
Savvy
Perdana
Firewall Outer
Satria Replacement Model
Hood Insulator
Insulation Padding
PERODUA
Pad Dash Panel
Kancil
Kelisa
Kembara
MyVi
Avanza
Firewall Outer
Spare Wheel Cover
Insulation Padding

11. Current Supplied Products
TCMA ( NISSAN )
Door Trims
Vanette
Carpet Flooring
Serena
X-Trail
Malaysia Trucks & Buses
Vinyl Flooring
Hicom Perkasa – All Variance
Insulation Padding
NAZA
Pad Dash Panel
NX-01
Spare Wheel Cover
Hood Insulator

12. List of Facilities Facilities
Hydraulic Presses
Hydraulic Cutting Machines
Water jet Cutting System
PU Foam Injection System
Spraying System (usable for both Paint & Adhesives )
With the above facilities, products that are shaped or non-shaped can be produced with respect to customer specification

13. Materials
All this materials being used have been tested and pass all automotive specification & requirements
PVC
EPDM
PHENOLIC RESIN FELT
NON PHENOLIC / THERMOPLASTIC FELT
POLYURETHANE FOAM
HARD BOARDS
POLYESTER SCRIMS
VINYL ( VARIANCE OF COLOR & EMBOSS )
CARPET ( FLAT, VELOUR, RANDOM VELOUR, TUFTED )
These are the materials that are currently being used for all the products, with a global supply chain where suppliers are selected based on quality, cost & delivery.

14. Engine & Exterior Interior Trim Trunk Compartment Insulation Paddings
Product Categories
Engine & Exterior
Interior Trim
Trunk Compartment
Insulation Paddings

15. Parts Location

16. Engine & Exterior Hood Insulator
insulates heat & sound from the engine to the exterior, protects the hood from paint deterioration due to overheat

17. Engine & Exterior
Hood Insulator Location

18. Engine & Exterior Firewall Insulator
Insulates heat & sound from engine towards the dash board

19. Engine & Exterior
Firewall Insulator Location

20. Engine & Exterior
Wheel Liner Location

21. Interior Trim Parts Floor Carpet System Carpet system
beneath the seats
that can some in
various design,
in shaped form or
non-shaped form,
further padded with
sound & vibration
insulation materials

22. Interior Trim Parts
Floor Carpet Location

23. Interior Trim Parts
Rear Seat Insulation

24. Interior Trim Parts Door Trim Panel
Door cover panels for appearance, can be molded or flat

25. Trunk Compartment Spare Wheel Cover wt or w/o Carpet
Insulates vibration noise from bottom and provide floor area for storage

26. Trunk Compartment
Spare Wheel Cover Location

27. Trunk Compartment Trunk Side Trims
Side cover for the boot compartment, with insulation properties and also appearance

28. Trunk Compartment
Trunk Side Trims Location

29. Trunk Compartment
Deck lid Location

30. Trunk Compartment
Parcel Shelf Location

31. Insulation Pad Dash Panel (Felt)
OEM to car assemblies, combine with Firewall, further insulate heat & sound from engine to the passenger & driver (FELT padding system)

32. Insulation Pad Dash Panel (Foam)
OEM to car assemblies, combine with Firewall, further insulate heat & sound from engine to the passenger & driver (PU Foam padding system)

33. Insulation
Pad Dash Panel Location

34. Insulation Paddings Padding Padding material to fill
places in the car to further
enhance sound insulation
performance