Presentation is loading. Please wait.

Presentation is loading. Please wait.

Laboratory Safety-Fume Hoods 29 CFR 1910.1450 Laboratory Safety Standard.

Similar presentations


Presentation on theme: "Laboratory Safety-Fume Hoods 29 CFR 1910.1450 Laboratory Safety Standard."— Presentation transcript:

1 Laboratory Safety-Fume Hoods 29 CFR 1910.1450 Laboratory Safety Standard

2 Laboratory Safety-Fume Hoods Chemical Hoods Conventional Bypass Auxiliary Air Bypass Re- circulating/Ductless Non-Chemical Hoods BioSafety Cabinets Laminar Flow Hoods

3 Laboratory Safety-Fume Hoods Horizontal Sash Vertical Sash CombinationsCanopy CaliforniaSlotted Walk-inEtc. Chemical Hood Types

4 Laboratory Safety-Fume Hoods Unstable Set- Up Flammable and Toxic Atmospheres

5 Laboratory Safety-Fume Hoods Unsafe Experiment

6 Laboratory Safety-Fume Hoods Chemical Contamination

7 Laboratory Safety-Fume Hoods Proper Set Up: Brightly Illuminated Clean Apparatus 6” Inside Slots Unobstructed

8 Laboratory Safety-Fume Hoods Unsafe Lab Practice

9 Laboratory Safety-Fume Hoods Unsafe Lab Practice

10 Laboratory Safety-Fume Hoods Safe Lab Practice

11 Laboratory Safety-Fume Hoods Restricted Airflow Chemical Escape Incompatible Chemicals Chemical Contamination Improper Chemical Storage

12 Laboratory Safety-Fume Hoods Proper Chemical Storage Hazard Class Secured Labeled Dry

13 Laboratory Safety-Fume Hoods Side or Rear 6” Beyond Sash Maximum 25% Slot Blockage Proper Material Storage

14 Laboratory Safety-Fume Hoods Sash Restricted Slot Opening Blocked Airflow Restricted Limited Protection Improper Equipment Storage

15 Laboratory Safety-Fume Hoods Elevate Apparatus Promote Airflow Contain Contaminants Proper Equipment Storage

16 Laboratory Safety-Fume Hoods Unsafe Illegal Improper Waste Disposal

17 Laboratory Safety-Fume Hoods One-Third Opening Chemical Exposure Explosion Protection Fire Containment Closed Sash Position

18 Laboratory Safety-Fume Hoods Set Up Tear Down Hazard Absent Open Sash Position

19 Laboratory Safety-Fume Hoods Limited Protection Report Damage Repair Before Using Damaged Sash

20 Laboratory Safety-Fume Hoods Reduced Air Velocity Fire/Explosion Chemical Exposure Raised Sash (Unattended)

21 Laboratory Safety-Fume Hoods Increased Air Velocity Contain Fire/Explosion Limit Exposure Lowered Sash (Unattended)

22 Laboratory Safety-Fume Hoods Unrestricted Traffic Air Turbulence Room Depressurized Chemical Exposure Fire and Explosion Open Lab Door

23 Laboratory Safety-Fume Hoods Control Foot Traffic Limit Turbulence Room Pressurized Limit Chemical Exposure Contain Fire and Explosion Provide Security Closed Lab Door

24 Laboratory Safety-Fume Hoods Ventilation Measurements Various Test Methods Face Velocity Measurements Sash Height Hood Contents Hood Performance

25 Laboratory Safety-Fume Hoods Ventilation Smoke Flow Patterns Laminar Flow Turbulence Eddy Currents Back Drafts Hood Performance

26 Laboratory Safety-Fume Hoods Certification Approval Caution Information Hood Performance

27 Laboratory Safety-Fume Hoods Danger Notice Do Not Use Hood Performance

28 Laboratory Safety-Fume Hoods Tissue Paper Ribbon Hood Performance

29 Laboratory Safety-Fume Hoods Flow Indicator Static Pressure Acceptable Range Alarm Mechanism Test Alarms Hood Performance

30 Laboratory Safety-Fume Hoods Flow Indicator Air Velocity Acceptable Range Alarm Mechanism Test Alarms Hood Performance

31 Laboratory Safety-Fume Hoods Ventilation System Duct Work Fan Exhaust Stack


Download ppt "Laboratory Safety-Fume Hoods 29 CFR 1910.1450 Laboratory Safety Standard."

Similar presentations


Ads by Google