Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 Hardness Measurement in Industry Tassanai Sanponpute Head of hardness and torque laboratories National Institute of Metrology (Thailand)

Published byElvin Cody Thornton Modified over 9 years ago

Similar presentations

Presentation on theme: "1 Hardness Measurement in Industry Tassanai Sanponpute Head of hardness and torque laboratories National Institute of Metrology (Thailand)"— Presentation transcript:

1 1 Hardness Measurement in Industry Tassanai Sanponpute Head of hardness and torque laboratories National Institute of Metrology (Thailand)

2 2 Most products around us today, related to the measurement of hardness. What is Hardness ?

3 3 Medicine tablet

4 4 Hardness of coins Should be 70 HV to 95 HV

5 5 Green sand mold

6 6 Hardness of wood

7 7 Welding parts Vickers hardness test

8 8 Carburizing Part Increased surface hardness Increased wear resistance Increased fatigue/tensile strengths

9 9 Carburizing Part Case hardness test Vickers hardness test

10 10 Carburizing Part

11 11 Gem and Mineral

12 12 Moh’s hardness test Moh’s hardness standard Gem and Mineral

13 13 Coating nano-hardness test

14 14 Coating micro-hardness test -Micro-Vickers -Knoop hardness test

15 15 Concrete Test The rebound is dependant upon the hardness of the surface under test, the harder the surface the higher the rebound and visa versa.

16 16 Rubbers, Plastics

17 17 Sheet metal and automobile

18 18 Sheet metal and automobile Rockwell hardness test

19 19 Massive and irremovable parts Portable hardness

20 20 END Thank you for your kind attentions

Download ppt "1 Hardness Measurement in Industry Tassanai Sanponpute Head of hardness and torque laboratories National Institute of Metrology (Thailand)"

Similar presentations

What Makes Up a Quality Sanding Abrasive? Vincent Welch 2008.

What Makes Up a Quality Sanding Abrasive? Vincent Welch 2008.
ALIVE or NOT For each write Alive or Not Alive. Is wood alive?

ALIVE or NOT For each write Alive or Not Alive. Is wood alive?
Chapter 3 Mechanical Testing

Chapter 3 Mechanical Testing
Hardness test Engr. 3451 Lab: 2.

Hardness test Engr Lab: 2.
Classification of Materials. Materials used in the design and manufacture of products Plastics Wood Ceramics Metals Fabrics.

Classification of Materials. Materials used in the design and manufacture of products Plastics Wood Ceramics Metals Fabrics.
What is a Material? How are Materials used?. What materials can you think of? Plastic Metal Wool Glass Wood Rock or Stone Fabric Rubber Sand.

What is a Material? How are Materials used?. What materials can you think of? Plastic Metal Wool Glass Wood Rock or Stone Fabric Rubber Sand.
Materials and Process Classifications

Materials and Process Classifications
Conceptual Designs. Most Commonly used Metals Plain carbon steels –Available in all structural forms, thin sheets, coated or uncoated, cold formed, hot.

Conceptual Designs. Most Commonly used Metals Plain carbon steels –Available in all structural forms, thin sheets, coated or uncoated, cold formed, hot.
ABRASIVES. Four Areas of Cabinet Manufacturing  machining room  sanding room  assembly room  finishing room.

ABRASIVES. Four Areas of Cabinet Manufacturing  machining room  sanding room  assembly room  finishing room.
LECTURER 3 Fundamental Mechanical Properties (i)Tensile strength

LECTURER 3 Fundamental Mechanical Properties (i)Tensile strength
Rocks are made up of minerals but minerals are not made up of rocks!!

Rocks are made up of minerals but minerals are not made up of rocks!!
BIG IDEA: Rocks and minerals have properties that can be: observed, tested, described, identified and recorded.

BIG IDEA: Rocks and minerals have properties that can be: observed, tested, described, identified and recorded.
Types of Tool Marks 1. Compression: when tool is pressed into soft material ◦ Show outline of tool 2. Sliding: when tool is slides across the surface ◦

Types of Tool Marks 1. Compression: when tool is pressed into soft material ◦ Show outline of tool 2. Sliding: when tool is slides across the surface ◦
Abrasives. Early kinds of abrasive Sand paper was first mass-produced in 1833.

Abrasives. Early kinds of abrasive Sand paper was first mass-produced in 1833.
Ferrous Metallurgy Education Today (FeMET) Exhibited in an Educational Website Whitney Patterson & Nick Gosseen Research Professor Dr. Findley.

Ferrous Metallurgy Education Today (FeMET) Exhibited in an Educational Website Whitney Patterson & Nick Gosseen Research Professor Dr. Findley.
Selection Criteria Properties Availability Cost Manufacturability

Selection Criteria Properties Availability Cost Manufacturability
Selection Criteria Properties Availability Cost Manufacturability

Selection Criteria Properties Availability Cost Manufacturability
PROPERTIES RELATED TO STRENGTH.  Strength is the ability of a material to resist applied forces without yielding or fracturing.  Strength of a material.

PROPERTIES RELATED TO STRENGTH.  Strength is the ability of a material to resist applied forces without yielding or fracturing.  Strength of a material.
Table 1. Table 1. Human control and osteoporotic (OP) patients. Mean values (±SD) for the Vickers microhardness (Hv). the degree of mineralization of bone.

Table 1. Table 1. Human control and osteoporotic (OP) patients. Mean values (±SD) for the Vickers microhardness (Hv). the degree of mineralization of bone.
Resistance Welding The resistance of metal to the localized flow of current produces heat Process variables –Current –Time –Force Spot and seam welding.

Resistance Welding The resistance of metal to the localized flow of current produces heat Process variables –Current –Time –Force Spot and seam welding.

Similar presentations

Ads by Google