1. Clean Air Boxes CABs RAMs CO Monitors

2. Features at a Glance Grade D Compliance Grade D Compliance Auto Calibration Auto Calibration Warning Systems Warning Systems Triple Power Source Options Triple Power Source Options Durable Construction Durable Construction Independent Regulators Independent Regulators

3. Grade D Compliance Set by Compressed Gas AssociationSet by Compressed Gas Association OSHA 1910.134 References NIOSH 42CFR84.141(b)OSHA 1910.134 References NIOSH 42CFR84.141(b) Oxygen 19.5%-23.5%Oxygen 19.5%-23.5% Hydrocarbons or oil (condensed) 5mg/m 3 max.Hydrocarbons or oil (condensed) 5mg/m 3 max. Carbon Monoxide (C0) 10 ppm maxCarbon Monoxide (C0) 10 ppm max Carbon Dioxide (CO 2 ) 1,000 ppm maxCarbon Dioxide (CO 2 ) 1,000 ppm max Odor – no noticeable taste or smellOdor – no noticeable taste or smell No toxic contaminants at levels that make the air unsafe to breatheNo toxic contaminants at levels that make the air unsafe to breathe

4. Grade D Compliance Incoming air with 19.5- 23.5% Oxygen 5 micron particulate filtration.01 Micron Filtration Carbon filtration for tastes and smells Carbon Monoxide Monitor for 10 ppm max. *3 stage filtration is only one element of an OSHA compliant Grade D breathing air system. The incoming air should be tested prior to use. CAB Series products will not remove CO, CO 2, Nitrogen or other toxic gases or fumes. These units will not increase oxygen supply and should not be used when air entering the system is oxygen deficient.

5. Auto Calibration 90 Seconds 90 Seconds No tools required No tools required No flow meter to adjust No flow meter to adjust No potentiometer to adjust No potentiometer to adjust Easy: push a single button Easy: push a single button *It is recommended that the unit be zeroed with impurity free test gas before calibration.

6. Warning Systems CO alarm CO alarm Visual and audibleVisual and audible Low flow alarm Low flow alarm Remote alarm Remote alarm 90dB with strobe90dB with strobe Low battery alarm Low battery alarm Visual and audibleVisual and audible Filter change indicators Filter change indicators

7. Triple Power Source Options 110V AC U.S. power cord std. Int’l cords available 9V battery in CO monitor 80 hrs of operation on (8) AA batteries make unit totally self- contained

8. Durable Construction Polycarbonate Pelican brand cases Powder coated steel Automatic condensate drains extend filter life Long life LEDs for fewer replacements Working pressure range up to 150 psi 1 year limited warranty on systems 2 year warranty on CO sensors

9. Independent Regulators Independent regulators allow up to 8 different workers to control their air supply properly

10. Remote Air Manifolds Remote Air Manifolds

11. RAM Features at a Glance NIOSH compliance NIOSH compliance Available sizes Available sizes Available options Available options

12. Point of Attachment Compliance 42CFR Part 84 Subpart J.149 www.cdc.gov/niosh/pt84abs2.html 42CFR Part 84 Subpart J.149 www.cdc.gov/niosh/pt84abs2.html www.cdc.gov/niosh/pt84abs2.html Pressure gauge - allows verification of this pressure setting at the point of attachment (see 84.149 (b)). Pressure gauge - allows verification of this pressure setting at the point of attachment (see 84.149 (b)). Regulator - allows adjustment of air pressure to manufacturer’s specified pressure range based on range of hose length used (see 84.149 (b)). Regulator - allows adjustment of air pressure to manufacturer’s specified pressure range based on range of hose length used (see 84.149 (b)). Pressure relief valve prevents pressure from exceeding 125 psi (see 84149 (d) (1)). Pressure relief valve prevents pressure from exceeding 125 psi (see 84149 (d) (1)). Congruous fitting allows connection of “Detachable couplings” as part of NIOSH approved respirator system (see 84.131 (5)). Congruous fitting allows connection of “Detachable couplings” as part of NIOSH approved respirator system (see 84.131 (5)).

13. NIOSH Compliance Regulator Pressure gauge 125 psi pressure relief valve Congruous fitting

14. Available Sizes & Options 1, 2, 4, 8 Outlets 1, 2, 4, 8 Outlets Independent regulators available Independent regulators available 5 outlet fitting types available 5 outlet fitting types available HansenHansen Hansen StainlessHansen Stainless Snap TiteSnap Tite SchraderSchrader CEJNCEJN

15. CO Monitoring

16. Features at a Glance Compliance Compliance Auto calibration Auto calibration Durable construction Durable construction 41 Series Filter bundles 41 Series Filter bundles

17. Compliance *The COHP addresses the CO monitoring requirement for OSHA compliance of a Grade D breathing air system. Filtration must be addressed separately. Meets OSHA Grade D requirements for CO monitoring and all NIOSH requirements for Point of Attachment

18. Auto Calibration 90 seconds 90 seconds No tools required No tools required No flow meter to adjust No flow meter to adjust No potentiometer to adjust No potentiometer to adjust Easy: push a single button Easy: push a single button *It is recommended that the unit be zeroed with impurity free test gas before calibration.

19. Durable Construction Polycarbonate Pelican brand cases Working pressure range up to 150 psi 1 year limited warranty on system 2 year warranty on CO sensor

20. 41 Series Filter Bundles The popular 41 Series 7-stage filtration systems from Bullard can be bundled with a Bullard COHP monitor to help comply with the key requirements for an OSHA Grade D Breathing Air System *7 stage filtration and CO monitoring alone will not guarantee an OSHA compliant Grade D breathing air system. The incoming air should be tested prior to use. Neither CAB Series nor 41 Series products will not remove CO, CO 2, Nitrogen or other toxic gases or fumes. These units will not increase oxygen supply and should not be used when air entering the system is oxygen deficient.

21. Support Call 877-Bullard Call 877-Bullard Visit www.bullard.com Visit www.bullard.comwww.bullard.com