1. The Mariners Load Releasing Hitch

2. Required Materials:
Two Large Carabiners
One 60” Rescue Runner
One Dissimilar Carabiner

3. Clip one end of the rescue runner into a large carabiner

4. Run the opposite end through the second carabiner

5. Continue back through the first carabiner

6. Pull carabiners 8”-10” apart and begin to wrap the rescue runner around the two parallel strands

7. Wrap around the parallel strands a minimum of four times

8. Pass the end of the rescue runner between the two strands near the second carabiner

9. Attach the dissimilar carabiner to the end of the rescue runner

10. Attach the dissimilar carabiner to the second carabiner

11. To transfer a load - Start by unclipping the dissimilar carabiner & re-clipping it around the parallel strands.

12. Slowly unwind the wraps which transfers the load