1. SDC PUBLICATIONS © 2011 Chapter 10 Section Views Learning Objectives:  Use CAD methods to create Section Views.  Use the Object Snap Shortcut options.  Change the Linetype Scale property.  Stretch and move objects with GRIPS.  Create cutting plane lines.  Use the HATCH command.

2. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Introduction In the previous chapters, we have explored the basic methods of creating orthographic views. By carefully selecting a limited number of views, the external features of most complicated designs can be fully described. However, we are frequently confronted with the necessity of showing the interiors of parts, or when parts are assembled, that cannot be shown clearly by means of hidden lines. Hidden features can be difficult to visualize

3. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Cut Away In cases of this kind, to aid in describing the object, one or more views are drawn to show the object as if a portion of the object had been cut away to reveal the interior.

4. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals

5. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals The Bearing Design

6. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Standard Views

7. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Drawing a cutting plane line

8. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Converting the side-view into a section view

9. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals Adding section lines

10. SDC PUBLICATIONS © 2011 AutoCAD® 2012 Tutorial First Level: 2D Fundamentals