We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byYazmin Somers
Modified over 4 years ago
Standard Head Screw Driver Used to tighten or loosen flat head screws.
Phillips Head Screw Driver Used to tighten or loosen Phillips head screws.
Measuring Tape Used to measure distances or lengths of wood.
Cross Cut Saw Used to cut across the grain of wood.
Hack Saw Used to cut a variety of materials. Has removable blades to change for the desired material.
Speed Square Used to draw straight lines and angles.
Framing Square Used to measure and draw right angles.
Curved Claw Hammer Used to drive nails and pull nails.
Rubber Mallet Used to hammer fragile objects.
Level Used to check the levelness of an object.
Wood Clamp Used to clamp wood for gluing or to hold wood in place for cutting.
Adjustable Wrench Used to tighten or loosen bolts of various sizes
Pipe Wrench Used to tighten or loosen pipes and pipe fittings.
Wire Cutters Used to cut wire and other small items.
Adjustable Pliers Used to tighten or loosen a variety of items.
Objective Define tools and materials used in agricultural engineering careers.
Fastening and Prying Tools
Tools and Fasteners And, Their Uses.
TOOLS OF THE TRADE!. Measuring Tools Tape Measure- a retractable, flexible metal rule housed in a plastic or metal case; used for measuring in general.
Tool Identification A guide to the identification of Hand Woodworking Tools.
Sheet Metal Hand Tools and Machinery
Tools English for Careers Class. tool belt A tool belt is used to hold tools on your body.
Electrical Wiring Circuit Board Project. STEP 1 - Identify all Parts of the Project Saw Drill Driver w/ bits Drill w/bits (not pictured) #2 Phillips Screwdriver.
Module 3: Marking out and Hand Tools
Hand Tools GE 105.
Tools and Machines Stuarts Draft High School Technology Education Department.
Electrician’s Tools Of The Trade Copyright © Texas Education Agency, All rights reserved.
Module One: Non-Powered Hand Tools.
Tool Identification Tool Identification and Use as Photographed and Prepared by Doug Best.
Hey! Will You Hand Me That?
By:Gord Darling Construction Technology
Electrician’s Tools Of The Trade
Mr. D’s Quick Guide to. Hand tools is any tool where the force comes from the human user. These have been used for thousands of years. Power Tools.
© 2020 SlidePlayer.com Inc. All rights reserved.