We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byArianna Mondy
Modified over 7 years ago
Materials to use in the Lab By Crystal Schmit
Crucible Tongs These tongs are used to pick up and hold a very hot crucible to prevent from burning yourself.
Double burette clamp This clamp is to hold two burettes at the same time. The clamp is attached to a ring stand.
Pipe-stem Triangle A frame that can support a container. Can be placed on an iron ring to provide a stage for a crucible.
Crucible and cover A cup-shaped lab material used to contain chemicals when heating them to very high temperatures. It also keeps oxygen out of the reaction.
Bunsen burner Used to heat materials in a lab. It also has a rubber hose that connects to the gas jet.
Ring Stand A support for other materials in a lab.
Wash bottle Used to rinse glassware in the lab
Wire Gauze Can support a container when heating while the Bunsen burner is beneath it. Also it helps spread the flame/heat around the container.
Test tube brush Used to clean a test tube.
Iron Ring Attached to the ring stand. It can be used to support a beaker.
Buret Vertical cylindrical piece. It is used to dispense known amounts of a liquid in experiments. It gives you a precise amount for experiments.
Stirring rod Used to stir liquids and combinations of chemicals.
Funnel To remove un-dissolved solids from a liquid mixture. It also can be used to help pour a liquid into a container that has a small opening. It can be placed in an iron ring.
Evaporating dish Container used for liquids. Usually when you want to evaporate a liquid from a chemical.
Flint Striker Used to create a flame on a Bunsen burner.
Watch glass Used to evaporate off the liquid part of a solution. Can also be used as a beaker cover.
Goggles Used to protect your eyes from broken glass, flames, and chemicals.
Test tube rack Supports and holds many test tubes.
Beaker It is usually used as a container for mixing or holding chemicals.
Erlenmeyer flask Gives approximate measurements of volume. It is usually used as a mixing vessel or a container for heating. Can hold liquids.
Florence Flask Used to hold a liquid during heating. Can hold solutions of chemicals.
Graduated Cylinder Used to measure the volume of liquids.
Test tube A container to hold chemicals during heating.
Test tube holder Holds a test tube during heating or after being heated to prevent from being burned.
Lab Equipment. Beaker Beakers hold solids or liquids that will not release gases when reacted or are unlikely to splatter if stirred or heated.
EQUIPMENT ID Bunsen burner – heat source
Chemistry Lab Equipment. Safety Goggles Protect eyes whenever working with chemicals in the lab.
Laboratory Equipment Pictures and Descriptions of Chemistry Equipment Used in the Laboratory.
Visuals, Spellings, and Uses The Right tool for the job!
Scientific Lab Equipment graduated cylinder (graduate) To measure volume of liquids accurately.
Lab Equipment Notes IPC Unit 1.
Lab Equipment. Balance Used to mass objects
Beaker Beakers hold solids or liquids that are unlikely to splatter if stirred or heated.
LABORATORY EQUIPMENT AND THEIR FUNCTIONS
Lab Equipment *These are the pieces of equipment you may see in class. You will be expected to know the names of the items and the actual use for each*
Identifying Lab Equipment
Lab Equipment. Beaker: 1B Reaction vessel: wide opening allows for stirring.
Lab Equipment Identification. 1. Goggles Use Protecting your eyes.
LABORATORY and SAFETY EQUIPMENT AND THEIR FUNCTIONS
Lab Equipment. 1.Beaker Tongs Used to grasp beakers 2.Glass Plate Used to view a specimen under the microscope.
Rap song (nclark.net).
Chemistry Equipment. Beaker doesn't measure the volume of liquids very accurately. It is usually used as a container for mixing or holding chemicals.
© 2022 SlidePlayer.com Inc. All rights reserved.