2. PHOENIX AUTHORISED DEALER IN BHARUCH DISTRICT. CONTACT:- 9978829228 OR 02646-252031 PHOENIX AUTHORISED DEALER IN BHARUCH DISTRICT. CONTACT:- 9978829228 OR 02646-252031

3. GENERAL PROPERTIES OF PP-RC:- 1)POLYPROPYNE RANDOM CO-POLYMER PIPE. 2)TEMPERATURE:- -4*C TO +95*C. 3)PRESSURE:- UPTO 20KG/CM2 AGAINST TEMPERATURE/PRESSURE 4)ATLEAST 10-15 YEARS LIFE EXPETANCY FOR JOINT GAURANTEE. 5)SOCKET FUSION WELDING MACHINE PROCESS 1) F ULL FORM OF PP-RC 2) T EMPERATURE WITHSTAND 3) P RESSURE WITHSTAND 4) V ALIDITY OF JOINT GAURANTEE 5) W ELDING PROCESS FACILITY 4/28/2015

4. MAIN CHARACTERISTICS OF PP-RC Noise The material’s elasticity and high insulation capacity mean a considerable reduction in the noise of the installation even when there is water hammering. Welding capacity This is fundamental characteristic of the system. It enables all the elements in the system to be joined by poly-fusion welding or the use of electric coupling. Portability The ANJNEY’s system is in full compliance with the international standards on the use of plastic materials for the transportation of drinking water. Head loss The internal surface of the pipes and fitting are smooth so limestone or other deposits cannot form and head loss is reduced to the minimum. 4/28/2015

5. MAIN CHARACTERISTICSOF PPRC:- Versatility The low specific weight means easy of transport and handling. The system can be used in traditional site installation, for the preparation of prefabricated constructions and in the creation of modules or fitted walls. Energy saving The reduced heat dispersion in association with a low thermal inertia, allow to supply hot water even if the pipe has not yet reached the average working temperature. The energy saving is in the range of 10% to 20%. Resistance to abrasion and corrosion This characteristic allows high flow velocities of the transported fluid.up to 7m/s, without any problem of erosion, even in the presence of acid and alkaline substance with PH values between 1 and 14. Low conductivity of the heat Since PP-R is a poor conductor of heat, condensation and heat dispersion of the transported fluid are considerably reduced Resistance to frost The typical elasticity of PP-R permits the enlargement of the pipe section under the thrust of the volume increase due to freezing of the conveyed liquid.. 4/28/2015

6. INDUSTRIAL APPLICATIONS :- 4/28/2015

7. PRODUCT RANGE - PHOENIX 4/28/2015

8. RESIN SPECIALITIES' FOR RANDOM CO-POLYMER:- ANJNEY GETS A SPECIAL GRADE RAW MATERIAL OF PP FROM ONE OF THE WORLD’S LARGEST POLYMER MANUFACTURING COMPANIES LIKE BASELL. THROUGH CONTINUOUS RESEARCH AND DEVELOPMENT, AND AFTER USING CERTAIN ADDITIVES AND SPECIFIC PROCESS, ANJNEY HAS DEVELOPED AND ENHANCED A SPECIAL GRADE OF PPRC. THIS SPECIAL GRADE HELPFUL LIKE VERY LESS THERMAL CONDUCTIVITY, COMPARED TO OTHER METAL AND POLYMER PIPES. THROUGH THIS ENHANCED VERSION, ANJNEY HAS MANUFACTURED PPRC HEAT SAVING PIPES FOR PREVENTING HEAT LOSS AND SAVING ENERGY. 4/28/2015

9. WHAT IS ANJNEY PPRC HEAT SAVING PIPES ? 4/28/2015

10. WALL THICKNESS OF PP-RC PIPES:- NOMINAL DIAMETER PN-10KG/CM2 MIN-MAX PN-16KG/CM2 MIN-MAX PN-20KG/CM2 MIN-MAX 20MM1.90 - 2.302.80 - 3.303.40 - 4.00 25MM2.30 - 2.803.50 - 4.104.20 - 4.90 32MM2.90 - 3.404.40 - 5.105.40 - 6.20 40MM3.70 - 4.305.50 - 6.306.70 - 7.60 50MM4.60 - 5.306.90 - 7.80 8.30 - 9.40 63MM5.80 - 6.608.60 - 9.7010.50 - 11.80 75MM6.80 - 7.7010.00 - 11.6012.50 - 14.00 90MM8.20 - 9.3012.30 - 13.8015.00 - 16.70 110MM10.00 - 11.2015.10 - 16.9018.30 - 20.40 160MM14.60 - 16.3021.90 - 24.3026.60 - 29.50 4/28/2015

11. PIPE SELECTION CHART :- TEMP DEG C*PN-10KG/CM2PN-16KG/CM2PN-20KG/CM2 1019.130.238.0 2016.325.832.4 3013.721.727.3 4011.518.423.0 509.815.519.5 608.212.816.2 706.29.812.3 803.96.27.7 952.74.15.2 4/28/2015

12. AGAINST METALLIC PIPES, PROVES SUPERIOR :- IT IS A TENDENCY OF ALL INDUSTRIES THAT THEY MOSTLY USE METAL PIPES (MS, GI, CI, SS) FOR EACH AND EVERY APPLICATION, WHETHER FOR HOT OR COLD TEMPERATURE. WHEREAS ANJNEY HAS DEVELOPED PPRC HEAT SAVING PIPES FOR DIFFERENT APPLICATIONS, THROUGH CONTINUOUS RESEARCH AND DEVELOPMENT, AND THROUGH PRACTICAL EXPERIENCE. FROM THE YEAR 2003 TO 2005, WE HAVE GIVEN FREE INSTALLATIONS IN MANY DIFFERENT INDUSTRIES AND TESTED THE SUITABILITY OF OUR PRODUCT PRACTICALLY. THEN ENHANCING OUR PRODUCT ACCORDINGLY. WE INTRODUCED THE SAME INTO MARKET. ANJNEY OFFERS PPRC HEAT SAVING PIPES WITH A CHALLENGE TO SAVE UP TO 60 % ENERGY, IN BOTH COLD AND HOT APPLICATIONS. SO IT IS SUITABLE FOR ANY TYPE OF CORROSIVE FLUID, CHEMICAL OR WATER. RESULT:- IN THE LAST 2-3 YEARS PHOENIX HAS COMPLETED 100 SUCCESSFUL INSTALLATIONS IN VARIOUS CHEMICAL, PHARMACEUTICALS AND DIES INDUSTRIES. 4/28/2015

13. AGAINST G.I.PROPERTIES :- 4/28/2015

14. U.V.STABILISED CHAPTER FOR OUTDOOR APPLICATION [SUN PROTECTION LAYER]:- 4/28/2015

15. ACTUAL PERFORMANCE IN CORROSIVE ATMOSPHERE:- 4/28/2015

17. SCRUBBER PIPELINES BY CONVERTING THE HDPE PIPING

18. 4/28/2015 D.M.WATER PLANT – PPRC PIPES & FITTINGS.

19. 4/28/2015 PPRC PIPING FOR SUCTION PUMP CUM HEADER

20. 4/28/2015 VARIOUS CHEMICAL PIPING – PPRC PIPES & FITTINGS

21. 4/28/2015 TURNKEY PROJECTS – ETP PIPING BY REPLACING THE HDPE PIPING

22. 4/28/2015 GNFC LIMITED – D.M.WATER PLANT PIPING ( REPLACING HDPE PIPING)

23. 4/28/2015 GNFC LIMITED – FRP TANK PPRC PIPING CONNECTION

24. 4/28/2015 HEAT EXCHANGER PLANT – PPRC-PPCH PIPES & FITTINGS AT BLUSTAR LIMITED

25. 4/28/2015 REMI METAL GUJARAT LIMITED-4 YEARS BEFORE INSTALLATION

26. 4/28/2015 PP-RC PIPES & FITTINGS HEADER PART-I

27. 4/28/2015 PPRC PIPES & FITTINGS HEADER PART II

28. 4/28/2015 PPRC PIPES & FITTINGS HEADER PART-III

29. 4/28/2015 EFFULENT WATER TRASFER PIPING AT ETP PLANT

30. 4/28/2015 VARIOUS BRANCHES FROM ONE PPRC HEADER FOR ETP

31. 4/28/2015 PUMP TO DISCHARGE PPRC PIPELINES

32. S 4/28/2015 INFACT, WE HAVE THREADED PARTS IN PPRC FITTINGS FOR PRESS.GAUGE & TEMP.GAUGE

33. 4/28/2015 FABRICATION WAS ON FOR PPCH PIPES & FITTINGS WHILE CAPTURE WAS DONE AT FIRST CARBON TECHNO-DAHEJ

34. 4/28/2015 AUTHORISED DISTRUBUTOR FOR BHARUCH DISTRICT