1. SabineCorinna Unger Daughter of the Late Wolfgang Unger President of ECO-WOLF, INC.

3. The high cost of virgin FRP materials The high cost of virgin FRP materials Environmental costs and concerns with composite materials disposal: Environmental costs and concerns with composite materials disposal: Regulative action concerning industrial waste Regulative action concerning industrial waste Producer responsibility for waste treatment Producer responsibility for waste treatment Styrene emission concerns across the world Styrene emission concerns across the world Ever increasing costs to dump pricey material Ever increasing costs to dump pricey material Not just the disposal fees, but all those additional costs of labor (including the tax and insurance costs), equipment, and lost production resources. Not just the disposal fees, but all those additional costs of labor (including the tax and insurance costs), equipment, and lost production resources.

4. The environmental and governmental pressures are increasing; our conscience and public responsibility should require it anyway! The environmental and governmental pressures are increasing; our conscience and public responsibility should require it anyway! It’s really a BRAINER if one is serious about preserving our environment for ourselves and our posterity! It’s really a BRAINER if one is serious about preserving our environment for ourselves and our posterity!

5. A common ROI of less than 12 months A common ROI of less than 12 months Exchanges FRP disposal costs for profit Exchanges FRP disposal costs for profit Up to 50% savings in material costs Up to 50% savings in material costs Reduces roll-out labor by at least 80% (when used with our No-Roll™ formulation) Reduces roll-out labor by at least 80% (when used with our No-Roll™ formulation) Significant reduction of environmental pollution Significant reduction of environmental pollution Significant Styrene emission reduction Significant Styrene emission reduction Elimination of landfill waste Elimination of landfill waste

6. At least 90% less roll out labor At least 90% less roll out labor VOC emissions as low as 10ppm VOC emissions as low as 10ppm Reduces material cost by 25-35% Reduces material cost by 25-35% Fast mold turn over Fast mold turn over Less than 6 minute gel times Less than 6 minute gel times Greater physical strength Greater physical strength

8. Compression Molding Compression Molding Casting Casting Hand Lay-up Hand Lay-up Resin Transfer Molding (RTM) Resin Transfer Molding (RTM) Conventional Spray-Up Conventional Spray-Up Rotational Molding Rotational Molding Spin Casting Spin Casting Filament Winding Filament Winding Pultrusion Pultrusion Vacuum Infused Compression Molding Vacuum Infused Compression Molding

9. Bath Tubs & Sinks Bath Tubs & Sinks Whirlpools & Spas Whirlpools & Spas Asphalt & Concrete Asphalt & Concrete Swimming Pools Swimming Pools Boat Hulls & Structural Parts Boat Hulls & Structural Parts Automobile Interior Parts Automobile Interior Parts Dock Pilings & Planks Dock Pilings & Planks Truck Toppers Truck Toppers Portable Water Closets Portable Water Closets Shipping Container Flooring Shipping Container Flooring Public Transport Interior Parts Public Transport Interior Parts Structural Parts (e.g. benches, fences, decks, etc.) Structural Parts (e.g. benches, fences, decks, etc.) THE POSSIBILITIES ARE ENDLESS

10. An environmentally conscientious philosophy can help you achieve BOTH. 1 st E NVIRONMENT E NVIRONMENT 2 nd $$ 1 st $$ 2 nd E NVIRONMENT Traditional Manufacturing Priorities Environmentally Conscientious Priorities

11. …THROWING MONEY DOWN THE DRAIN! If there is just ONE thing you take away with you today, let it be that: You PAY for raw materials You PAY for raw materials You PAY wages to have trimmings/scrap gathered You PAY wages to have trimmings/scrap gathered You PAY more and MORE to dispose of the scrap You PAY more and MORE to dispose of the scrap STOP PAYING – START PROFITING… GO GREEN!