1. SCHOOL BUILDING PROGRAM FOR BASIC EDUCATION (SBP4BE) DESIGNS

2. DESIGN CONSIDERATIONS
Factors affecting the physical condition of the students;
a. temperature & air quality
b. noise level (external & internal)
c. colour schemes
d. space in classroom

3. DESIGN CONSIDERATIONS
Function and needs of its user
Economy in construction, utilization and maintenance
Human dimensions
Design codes and Specifications

4. BASIC FEATURES : SINGLE STOREY FOUR (4)-CLASSROOM SCHOOL BUILDING DESIGN

5. BASIC FEATURES : SINGLE STOREY FOUR (4)-CLASSROOM
A. Basic Structure
Reinforced concrete
B. Column Schedules
200mm x 300mm – COLUMN SIZE
B. Roof Framing
Steel Rafters and Purlin
C. Exterior Finish
1. Roof
0.40mm PRE-PAINTED LONGSPAN Corrugated G.I. Sheet
2. Eaves
With Exterior Ceiling
3. Walls
6” CHB with plain cement plaster paint finish
4. Windows
Clear Glass Jalousie blades
On a Shutter-type windows
5. Doors
Panel Doors

6. BASIC FEATURES : SINGLE STOREY FOUR (4)-CLASSROOM
D. Interior Finish
1. Flooring
Reinforced concrete slab with plain cement finish
2. Ceiling
¼” thk Ordinary Plywood
3. Partition
6” CHB with plain cement plaster paint finish
E. Electrical Provisions
Complete with basic lighting fixtures and outlets
F. OTHERS
With Blackboards as specified
1. Ceiling Vents
dimension
mm X 275mm req’d area for 1 classroom

7. SPECIAL FEATURES :: TOILET ATTACHED Can accommodate
male students (2-water closet &
2- urinals)
female students (2-water closet)
Handwashing facilities (2-units of faucet per toilet)
Provision of toilet for persons with disabilty (1-water closet, 1-lavatory w/ complete accesories
Provision of ramp for persons with disability (PWD)
WINDOW SECURITY GRILLS
Provision of grills in all classroom windows
WATER SUPPLY
Provision of cistern tank

8. TWO STOREY FOUR (4)-CLASSROOM SCHOOL BUILDING DESIGN

9. BASIC FEATURES : TWO STOREY FOUR (4)-CLASSROOM
A. Basic Structure
Reinforced concrete
B. Roof Framing
Steel Trusses and Purlins
C. Exterior Finish
1. Roof
0.40mm PRE-PAINTED LONGSPAN CORR. G.I. ROOFING SHEET
2. Eaves
With Exterior Ceiling
3. Walls
6” CHB with plain cement plaster paint finish
4. Windows
Clear Glass Jalousie blades on a “Shutter-type” Windows
5. Doors
PANEL Doors (for Classrooms)
FLUSH Doors (for Toilets)
D. Interior Finish
1. Flooring
Reinforced concrete slab with plain cement finish
2. Ceiling
¼” (6mm) thk Ordinary Plywood
3. Interior Wall Finish
Plain cement plaster paint finish
E. Electrical Provisions
Complete with basic lighting fixtures and outlets

10. SPECIAL FEATURES :: TOILET ATTACHED PROVISION OF TOILETS EVERY FLOOR
Can accommodate
male students (2-water closet &
Urinal Trough)
female students (2-water closet)
Handwashing facilities (2-units of faucet per toilet)
Provision of toilet for persons with disabilty (1-water closet, 1-lavatory w/ complete accesories
Provision of ramp for persons with disability (PWD)
WINDOW SECURITY GRILLS
Provision of grills in all classroom windows
WATER SUPPLY
Provision of cistern tank
SERVICE STAIRCASE/EMERGENCY EGRESS/FIRE EXIT
Provision of Fire exit in compliance with B.P. 344 “Accessibility Law”

11. CROSS SECTION

12. WINDOW & DOOR DETAIL @ END WALL
900mm

13. WINDOW & DOOR DETAIL @ MID-SPAN WALL
900mm

14. WINDOW SCHEDULE DETAIL

15. TOILET LAYOUT FOR PERSONS WITH DISSABILITY

16. TOILET LAYOUT FOR PERSONS WITH DISSABILITY (PWD)

17. SINGLE STOREY FOUR (4)-CLASSROOM

18. TWO STOREY
FOUR (4)-CLASSROOM

19. DepEd COLOR SCHEME A. ELEMENT B. MASONRY PAINT (LATEX)
C. QUICK-DRY ENAMEL (QDE) PAINT FOR WOOD, METAL, etc.
1. Roofing & Accessories (if introduced)
Reference: PANTONE* Color System (Paints + Interiors) Foam Green TPX
2. Doors
QDE Palmyra Green DepEd SCRF
3. Column & Beams
MCS Columns Beige DepEd SCRF (Light shade)
QDE Columns Beige DepEd SCRF (Light shade)
4. Exterior Wall
MCS Exterior Beige DepEd SCRF (very light shade)
QDE Exterior Beige DepEd SCRF (Very Light shade)
5. Interior Wall
MCS Interior Beige DepEd SCRF (lightest shade)
QDE Exterior Beige DepEd SCRF (Lightest shade)
6. Ceiling (suspended or slab/stairslab soffit)
Flat White Latex DepEd SCRF

20. DepEd MINIMUM PERFORMANCE STANDARD AND SPECIFICATIONS (MPSS)

21. DepEd Minimum Performance Standard and Specifications (MPSS)
PURPOSE:
To Establish the minimum requirements
To conform with in the design and construction

22. The design proposals shall governed by the following:
A. Design Codes and Specifications :
Architectural Design, Structural Design, Electrical Design, Sanitary and Plumbing Design
B. Architectural Design Standards:
Classroom size
Windows
Doors
Floors
Ceiling
Roof
Partitions
Corridor
Chalkboard
Painting

23. C. Structural Design Standards
D. Electrical Design Standards
E. Sanitary and Plumbing Design Standards
F. Toilets
G. Materials
Reinforced Concrete
Structural Steel
Protection from Heat
Resistance to Termites
Protection from Corrosion
Resistance to Fire
Noise Level Limit
Protection from Toxicity
H. Design Standard for Furniture

24. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
Classroom Size
The size of the classroom
for elementary and
secondary schools must be
7 meters (m) in width/depth
x 9 m in length measured
from the centers of the walls
Floor
The floor must be of non-skid finish.
The finished floor line (FFL) should be higher than the corridor by 25 mm.
The first floor finish elevation of the corridor must be above the level of flood indicated/ identified in the Site Appraisal Reports (SAR) PLUS 0.20 m (8 iches).

25. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
Roof and Roof Cavity
0.40mm thk. Pre-painted longspan corr. roofing sheet
The minimum horizontal clear length of eaves (excluding gutter, if introduced) shall be: front = 1.50 m; rear = 1.10 m; and sides = 0.6 m i.e. no interior gutter. For the 2-storey building, maintenance access to the roof cavity must be through the corridor.

26. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
WINDOWS
Shutter Type window (“Jalou-Plas” or equivalent)

27. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
DOORS
Keyed Lever Type Locksets (“Creston”, “Sobo”, “EZ Set”, “Guli”)
Panel door type

28. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
DOORS
Keyed Lever Type Locksets (“Creston”, “Sobo”, “EZ Set”, “Guli”)
Panel door type

29. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
CHALCKBOARDS
The classroom must be provided with a built-in curved chalkboard measuring 4.88 m wide by 1.22 m tall with thicknesses of 0.13 m at center and 0.42 m at the 2 ends, with mounting heights and material and finish specifications as per DepED standard.

30. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
CIRCULATION & EMERGENCY EGREES
CORRIDOR
The minimum single-load corridor clear width shall be 2.50 m for all school building types
The fire exit ladders shall have a minimum clear width of 0.6 m

31. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
ELECTRICAL WORKS
Industrial Type Lighting with Bracket (Single Storey)
Replace Incandescent with CFL Bulbs
PVc Pipe Conduits (not Flexible Hose)
All wires are Stranded Type
T5 28w Flourescent Bulb (option for Ord. 40w Flourescent Bulb)
With Ceiling Fan

32. EXISTING DEPED STANDRAD SPECIFICATIONS
MINIMUM PERFORMANCE STANDARD & SPECIFICATIONS (MPSS)
ACTUAL PHOTO
PLUMBING WORKS
Waterline piping system
The system must be according to E DIN1988 for Polypropylene Random Copolymer (PP-R) type 3 pipe and ASTM A53/A53M. The system must provide for a waterline service entrance.
PPR PN16 (COLD)
PPR PN20 (HOT)

33. END OF PRESENTATION…….