1. Cycle Count WcBc is configured for Multiple types of Cycle Counting. WcBc is configured for Multiple types of Cycle Counting. Hard Count: Count every Unit Id. Hard Count: Count every Unit Id. Soft Count: Count the Number of Units and the Quantity of each Unit. Soft Count: Count the Number of Units and the Quantity of each Unit.

2. Hard Count 1) ¹ See the Rules for Entering/Scanning Unit Ids. 2)3) 3) Scan the Unit Id. This can be any type of Containment. Function Keys F3=Skip to the Next Item/Location Record F4=Soft Count F6=Finish counting all Units for the Item/Location 1) Scan the Cycle Count number from the Batch Sheet. 2) Scan the Location to Count. This is a validation of the Location from what is in the Batch.

3. Hard Count (Continued) 4) 4) Enter the Quantity Counted for the Item Location. Function Keys F3=Skip to the Next Item/Location Record F6=Finish counting all Units for the Item/Location F8=U/M Help 5) The Transaction Receipted with the “PI” number will be displayed for 2 seconds. 5)

4. Soft Count 1) ¹ See the Rules for Entering/Scanning Unit Ids and Item numbers. 2)3) 3) Press the F4=Key to go into Soft Counting for the Item/Location. Function Keys F4=Soft Count F6=Finish Counting for Item/Location 1) Scan the Cycle Count number from the Batch Sheet. 2) Scan the Location to Count. This is a validation of the Location fro what is in the Batch.

5. Soft Count (Continued) 4)5)6) 6) The Informational message is display with the number of Units. 4) Enter the number of Containers for the Item/Location. Function Keys F4=Finish entering Soft counts for Item/Location 5) Enter the Quantity per Container.