1. Welcome to Horner Operator Control Station Training

2. Class Agenda - Building Automation Discussion
- Product Overview/Capabilities
- Controller Basics
- Cscape Discussion
- Lab1 and Lab2
- More Cscape Discussion
- And more labs

3. Horner Building Automation
- Scheduled Lighting Control
- Zone Settable Schedule
- Motion Sensor for Schedule Override
- Temperature Readings
- Web Serving (Coming Someday)

4. Horner Building Automation
- Training Room
- Only Settable in Training Room
- CsCan Lighting Controls
- DMX Lighting for CAN Lights

5. Product Features: - Fully Integrated Display and Keypad
- Several Communication Options
- Ethernet (Available on Most models)
- EGD (Ethernet Global Data)
- SRTP
- Modbus Client and Server
- Ethernet IP
- Serial (Modbus, SNP, DF1, etc…)
- CsCan

6. Product Features (cont):
- Full Complement of I/O
- Analog Inputs
- Voltage and Current
- Temperature (THM, RTD, and Thermistor)
- Analog Output (Voltage and Current)
- High Speed Counters
- Mixed Modules
- Specialty Communication Modules

7. Product Features (cont):
- Various I/O platforms available
- Smart Stacks
- Remote Fiber I/O
- Smart Stix (CsCan)
- Smart Mods (Modbus)

8. Controller Basics - Programmable Controller - I/O (Inputs / Outputs)
A set of coded instructions that enables a machine to perform a desired sequence of operations.
To provide (a machine) with a set of coded working instructions.
To train to perform automatically in a desired way.
To prepare an instructional sequence
- I/O (Inputs / Outputs)
Input and Output communication between a controller and its "peripherals".
- Program (RLL)
Relay Ladder Logic. Similar to a one line electric diagram.
- Operator Interface
A device to let an operator monitor and adjust parameters on a machine or process through the controller.
- Networking
Interconnecting Controllers, Operator Interfaces and I/O to allow them all to communicate as one system.

9. Controller Basics Bit is One Decimal Place (Digital) A Byte is 8 Bits
Either On or Off (1 or 0)
A Byte is 8 Bits
+127 to -128
Word is 2 Bytes or 16 Bits
to ex = +37
(used for Analog and Register values)
(sign bit)

10. Bit Type I/O Type %I# Field Discrete Input to OCS. (Digital Inputs)
%Q# Field Discrete Output from OCS. (Digital Outputs)
%M# Internal Coils in OCS.
%T# Internal Coils in OCS. Non-Retentive.
%S# Internal Diagnostic Contacts.
%K# Function Key Contacts.
%D# Display bits used to turn on screens and for logical compares.

11. Word I/O Type
%R# Internal 16 bit Registers used to store user data information. Timers, counters, and data storage.
%AI# Field varying signal input to OCS.
%AQ# Field varying signal output from OCS.
%SR# Internal system values like Time/Date/Year, display, number, LED’s and more.

12. Cscape Setup

13. Cscape Communication Options
- Serial
- PC w/ Serial Port
- USB to RS232 converter (HE500USB600)
- Ethernet (Optional on Most Units)
- PCI or ISA
- USB to CAN Interface (K-CAN)
- USB (Currently only on the XL6)

14. Communication Setup

15. Communication Setup (Serial)
Up to 255 Com Ports
available.

16. Communication Setup (Ethernet)
3 different modes of
Ethernet:
GPRS – Cellular
NX/QX – Embedded
XL Series – Optional

17. Communication Setup (CAN)
3 different CAN
Interfaces:
CGM500 – ISA
ESD – PCI
K CAN – USB or PCI

18. Communication Setup (Modem)
Configures Internal
Modem and Phone
Number
New in Cscape 8.6

19. Editor Options View Properties Dialog Auto-Save Deselect Element
Open Last File
Export Setpoint Data
Aggressive Debug
Use Classic Cscape
Use Abbreviated Part
Numbers

20. Editor Options View “Properties Dialog” after Snap-in of Element
When checked, the programmer will need to assign addresses to the element after placement. The Properties Dialog box will automatically open.

21. Editor Options Auto-save
When checked, this option will automatically save the program at that moment in time.
Caution that this feature will not prompt the programmer that an Auto-save is about to take place so take care and archive programs.
Return to Editor Options

22. Editor Options De-select element after placement
If checked. After an element is placed on the screen, the arrow pointer will appear.
If unchecked, the element will remain active until the arrow is selected from the Tool Bar or ESC is pressed.
Return to Editor Options

23. Editor Options Open last file on startup
If checked, Cscape will open the last saved file when Cscape is opened the next time.
Return to Editor Options

24. Editor Options
Export Setpoint Data
Return to Editor Options

25. Editor Options Use Aggressive Debug Screen Updates
When checked, this option will update your PC’s video card more often than when it is not checked. On some PC’s if not checked, Debug may not indicate the true state of some elements.
Return to Editor Options

26. Editor Options Use Classic Cscape Mode
When checked, Cscape will have the same look and feel as pre-version 8.5.
Return to Editor Options

27. Editor Options Use Abbreviated Part Numbers
The US and European Offices have different part numbering structure for the same components. When checked, it will display the US part numbers in areas where part numbers are referenced.

28. Editor Options - Ladder
Multiple Output Coils
Function Blocks
Variable Display
Advanced IEC 61131

29. Editor Options - Ladder
Multiple Output Coils
Allow – Allows programmer to reference the same output coil multiple times without generating an error.
Warning – Allows programmer to reference the same output coil multiple times but will generate an error when error checking is performed and when a download is performed. Warning will still allow the programmer to download the program.
Error – Will generate an error when error checking is performed and when a download is attempted but will not allow a download.
Return to Ladder Editor Options

30. Editor Options - Ladder
Function Blocks
When checked, allows programmer to branch around functions with a contact.
An error will be generated at the time of a download if this is not checked and a branch around a function is performed.
Return to Ladder Editor Options

31. Editor Options - Ladder
Variable Display
Name and Address will display both the I/O name assigned to the variable, if assigned, and the address of the variable in Cscape.
Address Only will display only the address of the variable in Cscape.
Return to Ladder Editor Options

32. Editor Options - Ladder
Advanced IEC Languages
This should be left as “Only Execute Advanced Ladder”

33. Editor Options - Numbering
2 options for laddering numbering:
Line Numbers – Black Numbers
Rung Numbers – Shown in red after
a rung is created.
Line numbers count all spaces and
comments where the rung number
only increases when a rung is created.

34. Editor Options - Colors
This sets the background color of Cscape.
Take caution when using the following
colors:
Red – Debug is red so debug is difficult
to view.
Black – Rungs are black so impossible
to see rungs.
White – Grid lines are white so grid
lines are not viewable.

35. Connecting to a Controller
Connect button is used to go online with the controller and offline with the controller when connecting serially to a controller. Pre-version 8.6, the software would capture the configured port when Cscape was opened.

36. Connecting to a Controller
Local indicates the controller ID that the software is directly connected.
Target indicates the ID that the software is attempting to communicate with.
It is possible to have a Local and Target that are different.

37. Connecting to a Controller
Things to verify if Cscape is not communicating with the controller:
- Verify the state of the Local ID. If the local contains ???, then the software is not communicating to the controller.
- Verify that another software package is using the port.
- Verify that the unit is powered up.
- Verify that the connected unit is not using the programming port for another function. If this is the case, then putting the controller into Stop or IDLE mode through the System Menu will open the port for Cscape communication.
- If the Local indicates No Port
- Verify that the configured port is an actual port on the PC. This can be done through the control panel of the PC.
- Verify that the programming cable is plugged into the PC and the controller.
- The following is trouble shooting for pass through CsCAN communication. If the Local Indicates a valid number (1 – 253), then verify the Target ID is correct. The state of the Target will be in parenthesis after the Target number. If this indicates anything other R, I, D, then verify the cabling, baud rate, and the setting of the Target node ID.

38. Controller Configuration

39. I/O Configuration - Smart Stack

40. I/O Configuration – X Products

41. I/O Names

42. I/O Names Rules for I/O Naming: - Names must begin with a letter
- Names can not contain any spaces
- Names can not contain any special characters

43. Boolean Elements
Normally Open Contact – Passes power when element is active.
Normally Closed Contact – Passes power when element is not active.
Normally Open Coil – Active when rung it true.
Normally Closed Coil – Active when the rung is not true.

44. Creating New Rung Place Contact in the A column.
Notice the Screw Terminal in the left margin.

45. Creating New Rung
Right Click in the left margin to create a new rung of logic.

46. Branching Tool

47. Output Coils Placement