1. McKeown Group OpenFlow v1.0 Weekly Status Report Week2/2011 (01/12 Wed—01/18 Tue) 1

2. Status Update WIRED Pkt-in loop in NEC (Not a NEC bug) – Resolved. Updated SNAC and NOX DEMO NETWORK Removed ofwifi overlap on necsw Moved hpsw4 in place of necsw3 – Problems with aggregation demo. Still debugging. 2

3. Status Update WIRELESS Ofwifi went down several times – New FV is still unstable in ofwifi Crashed 2 times At some point, flow setup time gradually gets too large and requires restart – Analysis suggests flow setup time in “SNAC” increase when FV exists – Reported to Rob S for fix Two APs are installed in CIS/CISX 3

4. Performance Summary WIRED NETWORK Spikes in RTT – Non-OpenFlow network also has this spike

5. Performance Summary WIRELESS NETWORK Unstable flow setup time Spikes in RTT – Both are due to slow-down of FV

6. Performance (WIRED) 6

7. Network Configuration hpsw3 netfpga1 indigo1 Masa Paul Srini/Tatsuya/Rob Dan Adam Payman Brandon/David E/Glen Lots of power meters We’ll use this color code for the switch 7 Controller (at openflow5.stanford.edu) SNAC (v1.0 wire compat) necsw6 Non-OF uplink

8. Measured metrics (no change) Switch Statistics – Active flows – Flow injection rate – CPU usage – Traffic volume Network Performance – Flow setup delay – E2E RTT – E2E packet loss rate – wget delay 8

9. Flow Statistics per switch SwitchAvg # FlowsAvg Flow Setup Rate [flow/sec] necsw6 0.164.2 hpsw3 160.77.9 indigo1 66.47.1 netfpga1 682.4 nonof -- 9

10. Flow statistics (# of active flows) 10

11. Flow statistics (flow injection rate) 11

12. CPU usage 12

13. Total Traffic Volume per switch 13 Not available for indigo1 nor netfpga1

14. Network Performance Flow setup delay E2E RTT wget delay 14

15. Flow Setup Delay 15

16. Flow Setup Delay switch10ms100ms1000ms necsw5 48.380794.895399.7565 necsw6 47.81997.834899.6847 Hpsw3 89.739599.231399.8616 Indigo1 18.340598.389299.9068 netfpga1 94.420599.684899.9933 Nonof 48.380794.895399.7565 Percentage of time flow setup delay is less than the target value 16

17. RTT E2E RTT from each switch 17

18. RTT switch1ms10ms100ms necsw5 99.983999.985799.9915 necsw6 98.797499.981799.9885 hpsw3 98.756699.977399.9843 indigo1 98.664399.983199.985 netfpga1 98.755599.978399.9861 nonof 98.809899.9995 99.9997 Percentage of RTT is less than the target value 18

19. wget delay 19

20. Performance (WIRELESS) 20

21. Network Configuration (no change) necsw1 We’ll use this color code for the switch Controller (at openflow1.stanford.edu) SNAC (v1.0 wire compat) FlowVisor (currently removed due to slow flow setup time) necsw4 Non-OF uplink ap17 ap18 ap15 ap16 ap2 24 tunneling APs

22. Measured metrics (no change) Switch Statistics – Active flows – Flow injection rate – CPU usage – Traffic volume Network Performance – Flow setup delay – E2E RTT – E2E packet loss rate – wget delay 22

23. Flow Statistics per switch SwitchAvg # FlowsAvg Flow Setup Rate [flow/sec] necsw4222.730.2 necsw177.84.5 23

24. Flow statistics (# of active flows) 24

25. Flow statistics (flow injection rate) 25

26. Switch CPU usage 26

27. Total Traffic Volume per switch 27

28. Network Performance Flow setup delay E2E RTT wget delay 28

29. Flow Setup Delay 29

30. Flow Setup Delay switch10ms100ms1000ms necsw4 26.856289.817298.8306 necsw1 37.657495.874999.1936 Percentage of time flow setup delay is less than the target value 30

31. RTT E2E RTT from each switch 31

32. RTT switch1ms10ms100ms necsw4 99.484499.499899.5966 necsw1 99.482799.50799.6211 Percentage of RTT is less than the target value 32

33. wget delay 33