Presentation on theme: "Project: Long Distance Wi-Fi Data-Link By Ryan Gaw In order to demonstrate a real-world (non-farm) application for this project, it uses the scenario."— Presentation transcript:
Project: Long Distance Wi-Fi Data-Link By Ryan Gaw In order to demonstrate a real-world (non-farm) application for this project, it uses the scenario of a company called TP-NETLINK and their client V-AUSTRALIA for whom theyve recently provided this networking solution to. Dont Forget to Clap at the End : ).. Ryan
Lets face it.. were better than you! tpnetlink.wikispaces.com Equipment & Technical Support for this Project Provided by TP-NETLINK can provide the perfect solution for youre companies specific requirements. Well do it on-time and best of all, well do it within budget using professional equipment! V-Australia Client Project LONG DISTANCE WI-FI DATA LINK TP-NETLINK
V-Australia Client Project CLIENT SITUATION (1) V-Australia decided to expand their business by converting an unused warehouse into a Student Training Facility. The warehouse is located approximately 150 meters from their Head Office. Before this expansion project could go ahead however, the Directors imposed a number of rules and requirements to insure that V-Australia would maintain its profitability and avoid any additional overheads. The requirements were as follows: · All internet, email, VoIP and other ICT required at the new Student Training Facility were to be drawn from the Head Office · Access to the network at the new site will be delivered by Wireless LAN · The WLAN must use the latest Wi-Fi standards & security and have at least five fixed / wired LAN connection points as a backup to the WLAN. Equipment & Technical Support for this Project Provided by TP-NETLINK
V-Australia Client Project SOLUTION PROVIDED (2) TP-NETLINK presented V-Australia with a range of possible solutions to meet their specific requirements and to a budget comparable with the size of their operation. Our client selected TP-LINK equipment, recognized in the industry for offering the best combination of price and reliability. Details of the installation are on the following page. The total cost for the installation came to AU$ 1,823.95 TP-NETLINK
TP-LINK TL-WA601G Wireless Access Point TP-LINK TL-ANT2414A 14db Directional Antenna (Top Left) Equipment & Technical Support for this Project Provided by TP-LINK TL-WA642G Wireless NAT Router OTHER TP-LINK HARDWARE Omni-Directional Antenna (Shown Top Right) TP-LINK TL-SF1008D 8 Port 10/100 Switch (Not Shown) TP-NETLINK V-Australia Client Project NETWORK PLAN & TP-LINK HARDWARE (3)
Equipment & Technical Support for this Project Provided by An Access Point or Router, such as the TP-LINK TL-WA601G or TL-WA642G, that can be configured to work in Bridge Mode, can wirelessly extend the existing network from the Head Office to the new Training Facility Building. In order to fine tune the data-link between the two locations, a directional antenna, such as the TP-LINK TL-ANT2414A is used on each bridge, pointing towards each other. TP-NETLINK V-Australia Client Project PROJECT DETAILS (4) 1x TL-WA601G Bridge 1x TL=WA642G Bridge / A.P. 2x TL-ANT2414A Antennas
THE END The TP-LINK hardware for this project was kindly provided free of charge by Anyware Computers (Aust.) and also the manufacturer, TP-LINK. Please consider supporting these companies that have been keen to assist with this project and to play a part in our education of networking hardware and equipment. Visit www.tp-link.com for more information or www.anyware.com.au for details on where you can purchase TP-LINK hardware andwww.tp-link.comwww.anyware.com.au other IT products within Australia or New Zealand.