Presentation is loading. Please wait.

Presentation is loading. Please wait.

Most Frequently Cited Serious Violations

Similar presentations


Presentation on theme: "Most Frequently Cited Serious Violations"— Presentation transcript:

1 Most Frequently Cited Serious Violations
Construction – FY 2010 OSHA Federal Standards October 1, 2009 – September 30, 2010

2 Most Frequently Cited Serious Violations in Construction
Fall protection – Residential construction 6’ or more Portable ladders 3 feet above landing surface Fall protection - Unprotected sides & edges Head protection Fall hazards training program Standard & Subpart Eye & face protection Aerial Lifts - Body belt and lanyard Scaffolds - Fall protection Scaffolds - Access Scaffolds - Platform construction Number of Serious Violations - FY 2010

3 Subpart C - General Safety & Health (1926.20 - 35)
Inspections by competent person Employee training programs Initiate and maintain accident prevention programs Housekeeping Personal protective equipment – Employer responsibility Number of Serious Violations - FY 2010

4 Number of Serious Violations - FY 2010
Subpart D - Occupational Health & Environmental Controls ( ) Lead - Exposure assessment First aid training Emergency eyewash/shower Lead – Interim protective clothing/equipment Lead – Interim respiratory protection Number of Serious Violations - FY 2010

5 Number of Serious Violations - FY 2010
Subpart E - Personal Protective & Life Saving Equipment ( ) Head protection Eye & face protection PPE - Provided, used & maintained Required eye & face protection – ANSI requirements Life jackets/vests Number of Serious Violations - FY 2010

6 Subpart F - Fire Protection & Prevention (1926.150 - 159)
2A fire extinguishers - Building area Extinguishers within 50 ft. of flammables/combustibles Extinguishers – Inspected and maintained Flammable/combustible liquids – Approved containers Service and refueling areas – No Smoking signs LP Gas – Protection from vehicle damage Number of Serious Violations - FY 2010

7 Subpart G - Signs, Signals & Barricades (1926.200 - 203)
Traffic control signs/devices - Requirements Traffic signs at points of hazard Flaggers – Signaling by & use of Number of Serious Violations - FY 2010

8 Number of Serious Violations - FY 2010
Subpart H - Materials Handling, Storage, Use & Disposal ( ) Rigging equipment inspection & removal from service Exterior drop chutes Welded alloy steel chain slings - Identification Slings, fastenings & attachments - Inspections Synthetic web slings - Removal from service Number of Serious Violations - FY 2010

9 Subpart I - Tools: Hand & Power (1926.300 - 307)
Tools designed for guards - Guards in place Guarding of portable circular saws Guarding of rotating/moving parts Guarding of ripsaws Woodworking tools - ANSI requirements Number of Serious Violations - FY 2010

10 Subpart J - Welding & Cutting (1926.350 -354)
Cylinders secured upright Oxygen cylinder storage Cables free from repair/splices within 10 ft. of cable end Cables needing repair Fire extinguishing equipment in area Number of Serious Violations - FY 2010

11 Subpart K - Electrical (1926.400 - 449)
Grounding path Ground fault protection Flexible cords – Strain relief Worn/frayed cords or cables Equipment installation & use Number of Serious Violations - FY 2010

12 Subpart L - Scaffolds (1926.450 - 454)
Aerial lifts - Body belt & lanyard Scaffolds above 10 ft. - Fall protection Scaffold access Scaffold platform construction Training for employees using scaffolds Number of Serious Violations - FY 2010

13 Subpart M - Fall Protection (1926.500 - 503)
Fall protection - Residential construction 6’ or more Fall protection - Unprotected sides & edges Fall hazards training program Fall protection - Roofing work on low-slope roofs Fall protection – Steep roofs Number of Serious Violations - FY 2010

14 Number of Serious Violations - FY 2010
Subpart N - Cranes, Derricks, Hoists, Elevators & Conveyors* ( ) Annual inspection – Competent person Swing radius at rear of crane barricaded Employees kept clear of loads Inspection prior to use – Competent person Clearances between power lines and equipment *Note: A new rule for cranes, Subpart CC―Cranes and Derricks in Construction, was effective November 8, Subpart N was changed to Helicopters, Hoists, Elevators, and Conveyors. This change will affect FY 2011 data. Number of Serious Violations - FY 2010

15 Number of Serious Violations - FY 2010
Subpart O - Motor Vehicles, Mechanized Equipment, & Marine Operations ( ) Industrial trucks - ANSI B Approval for modifications Earthmoving/compacting equipment - Reverse signal alarm Industrial trucks – No unauthorized personnel Lifting/hauling equipment - Use of safety platform Number of Serious Violations - FY 2010

16 Subpart P - Excavations
( ) Employee protection in excavations - Protective system use Egress from trench excavations Inspections by competent person Protection from falling/rolling materials/equipment Competent person inspection - Employees removed from hazard Number of Serious Violations - FY 2010

17 Subpart Q - Concrete & Masonry Construction (1926.700 - 706)
Reinforcing steel - Guarding Masonry walls - Bracing Formwork – Drawings/plans available on jobsite Number of Serious Violations - FY 2010

18 Subpart R – Steel Erection (1926.750 - 761)
Protection from fall hazards Fall hazard training Materials being hoisted – Rigged to prevent displacement Fall protection for connectors – More than 2 stories or 30’ Fall protection for connectors – 15’ to 30’ Number of Serious Violations - FY 2010

19 Subpart T - Demolition (1926.850 - 860)
Engineering survey - Prior to operations No materials dropped outside exterior walls Shoring/bracing for damaged structures Stairs, passageways, ladders in clean, safe condition Number of Serious Violations - FY 2010

20 Number of Serious Violations - FY 2010
Subpart X - Ladders ( ) Portable ladders 3 feet above landing surface Training program Appropriate use of ladders Top of stepladder improperly used Stairrails & handrails Number of Serious Violations - FY 2010

21 Subpart Z - Toxic & Hazardous Substances (1926.1100 - 1152)
Asbestos - Exposure assessment by competent person Asbestos - Training program Asbestos – Class I, II & III work in regulated areas Asbestos – Before work, determine ACM/PACM* Asbestos – Monitoring * Asbestos-containing material/Presumed asbestos-containing material Number of Serious Violations - FY 2010


Download ppt "Most Frequently Cited Serious Violations"

Similar presentations


Ads by Google