1. Smoke detection and fire prevention system

2. Presented by Name Id Md. Minhaj Ali 201015098 Md. Arif Arman 201015045
Afna Peya

3. Introduction:
Working smoke alarms give you early warning so you can get outside quickly. A closed door may slow the spread of smoke, heat and fire. Install smoke alarms in every sleeping room and outside each separate sleeping area. Install alarms on every level of the home.

4. Component needed:
Create a House.
Place the smoke detector in the house.
Place the fire prevention tools:
fire sprinkler.
Open window and door.
Play Siren.
Place home Gateway.
Place the smart device for access the data.
2960-switch.
Wire.
Connect/configure all component with home gateway.

5. why important smoke detector and fire prevention?
Smoke alarms save lives. Smoke alarms that are properly installed and maintained play a
vital role in reducing fire deaths and injuries. If there is a fire in your home, smoke spreads
fast and you need smoke alarms to give you time to get out.
What is the main purpose of a smoke detector?
Smoke alarms detect fires by sensing small particles in the air using a couple of
different kinds of technologies. Once they detect those particles above a certain threshold, they signal
the alarm to sound so that you and your family can get to safety and call 999. Smoke alarms save lives.

6. Working procedure:
Circuit diagram:

7. Working procedure:
Home gateway:
Login:

8. Working procedure:
Add component:
Condition:

9. Working procedure:

10. Advantage of fire prevention system:
Sprinkler systems are automatic and respond at all times. Fire control is therefore rapid and no human intervention is needed.
Sprinkler systems are fitted with water flow ‘gong’ alarms and will alert occupants.
Sprinkler controlled fires reduces the demand for security as it minimises intrusion opportunities.
Sprinkler systems use significantly less fire water than hydrants, hydraulic hose reels or the fire brigade.

11. Conclusion
Hence electronic circuits can be designed for the fire based alarms and they provide very high efficiency and can be used for the security reasons. Early fire detection is best achieved by the installation and maintenance of fire detection equipment in all rooms and areas of the house or building.

12. Thank you