1. E P C
Engineering Procurement Construction

2. ABOUT THE COMPANY
ТОО «Caspian Contractors Trust» is one of the most successful companies in the Kazakhstan market, founded since During this time, the company has earned a reputation as a professional and reliable partner.
Our company has gone from a highly specialized contractor for the construction of oil and gas infrastructure to a diversified company capable to carry out large-scale turnkey projects at the level of international standards.
The strategic directions of the company’s activities are related to engineering and design, reconstruction and construction (EPC) of energy facilities, oil and gas, petrochemical and other industrial sectors, transport, and civil infrastructure, including radioactive waste management.
Our strength lies in long-term relationships with customers and partners, many of which we have an honor to call respectable friends.
We are valued for responsiveness and responsibility and our work is considered an integral part of our own success.

3. HISTORY OF SUCCESS
EPC project of AktauPolymer factory for pre-insulated and polyethylene pipes
Foundation of CCT Company
EPC Nitrogen Plant Project
ЕРС project of re-boilers for complex treatment of oil
Completion of construction of our own steel structure plant and technological equipment in Atyrau
EPC contract of the car wash complex project
EPC project of Kazkhim plant for polypropylene products
2004
2006
2008
2010
2012
2014
2016
2018
Construction in oil and gas
Infrastructure development in Bautino NCOC rotational village
Infrastructural and civil construction
Environmental license
License for radioactive waste management
Oil and gas engineering and consulting
Industrial Construction

4. E
Engineering is the complex of activities which includes pre-design, FEED, development of technical-financial basement of construction and preparation of design, project and estimation documentation P
Procurement – accurate selection of required equipment and its timely delivery plays one of the critical roles in execution of any investment and construction project.
Construction quality mostly depends on used construction materials and equipment that provides process automation during construction. С
Construction – includes not only project construction and commissioning activities, but also execution of certain project stages during construction: equipment supply, installation and start-up.
Quality of commissioning works mostly depends on technical competence and experience of specialists.

5. Atyrau, Shymkent cities
OUR ADVANTAGES 50
+190
Over
Completed projects
Proprietary heavy equipment 2 17
Branches in
Atyrau, Shymkent cities
Years of experience
200 2
Proprietary production
Qualified personnel

6. Primary areas Engineering and design Construction
1. Design activities category 1
2. Design of chemical, drilling, oil and gas, geological survey, mining, metallurgical, power equipment, explosion-proof electrical equipment, lifting equipment
3. Design of mining, petrochemical, chemical projects
4. Survey works
Construction
1. Infrastructural facilities
2. Industrial facilities
3. Auto-road and railroad
Maintenance of industrial facilities
Commissioning works,
Maintenance and repair ,
Storage services,
Thorough analysis of defects,
Consulting Services on production
Production and installation
1. Own production of steel structure and technical equipment in Atyrau, Nur-Sultan cities.
2. Installation of steel structure.
3. EPC projects

7. Production capacity

8. PLANT OF STEEL STRUCTURE AND TECHNICAL EQUIPMENT IN ATYRAU city
Plant of steel structure and technical equipment is located in territory of Atyrau city, with area 14 ha.
Plant is currently the leading enterprise in Atyrau oblast.
Production capacity of the plant:
Design and engineering;
Fabrication of steel structure;
Procurement of materials and equipment;
Fabrication of RC products;
Construction;
Nowadays LLP “Caspian Contractors Trust” is the full- service contractor with:
• category 1 licenses for all types of design and construction and installation works
• proprietary production capacities
• experience taking part in international projects
• certificates of comformaty ISO 9001, и OHSAS 18001
Among our clients:
• Agip KCO, NCPOC and NCOC
• Atyrau Oil Refining Plant and other departments of KazMunaiGas • Tengizchevroil and KPJV
• Worley Parsons, Sinopec Engineering, KazStri Service and other leading companies and contractors.
Having multidiscipline team of experienced personnel, CCT provides full range of construction and installation works:
• earthworks and concrete works
• architectural and construction works
• equipment installation
• pipeline, horizontal directing drilling
• HVAC system for infrastructural, oil and gas? Power and chemical projects.

9. ADVANTAGES
PLANT OF STEEL STRUCTURE AND TECHNICAL EQUIPMENT in Atyrau city
Informational system “Digital Plant” is implemented at the plant.
What is IS “Digital Plant” – it is automated system of managing the plant on the basis of artificial intelligence algorithm, also obtaining up-to-date data related to production delay, recommendations from algorithm and timely satisfaction of production needs in materials, spare parts and devices.
Main criteria for effectiveness of system implementation is:
• increasing accomplishable characteristics and quality of produces products (for 15%);
• improvement of the usage of assets (for 1,5 times);
• improvement the quality of customer service;
• decreasing of operational expenditures (for 23%);
•increasing effectiveness of the performance of employee’s (for 20%);
• optimization of working processes;
Implementation of artificial intelligence helps to increase the speed of decision taking, which minimizes operational risks in the course of working process by fast handling big data obtained during operating process.

10. Fabrication shop Hot dip galvanizing Painting Shop Packing shop
12000 m2
Main fabrication section with modern processing machinery (3D-boring, marking, plasma and gas cutting, sawing, punching, and etc.)
Hot dip galvanizing
13000 m2
Hot dip galvanizing process consists of dipping of pre-fabricated steel into kettle\bath of molten zink with temperature about 450°C.
Painting Shop
2800 m2
Innovative system of technological ventilation, mobile drying chamber, equipment for application of fireproofing coating and paint is used in the painting shop.
Packing shop
2200 m2
Shop is equipped with wide access for truck and crane beam, which allows to lift and load heavy weight of steel structure.
Each shop is stand-alone, with separate access route and railway branch

11. Hot dip galvanizing shop
SSTE scheme in Atyrau city
5 production shops:
- Steel fabrication shop sq.m;
- Hot dip galvanizing shop sq.m .;
- Shot blasting shop 2500 sq.m .;
- Painting shop 2800 sq.m .;
- Packing shop 2200 sq.m .;
Logistic complex:
- 4 railway dead ends;
- Warehouse crane area sq.m.
Hot dip galvanizing shop
Administration office
Manufacturing facility
Crane area
Packing shop
Painting shop
Shot blasting shop
Warehouse crane area
Additional production and storage:
- Concrete mixing unit - 60 cubic meters in hour
- Indoor warehouse 5500 sq. m
Concrete mixing unit
RC products

12. Convenient logistics
Distance ( time for delivery by vehicle) between CCT plant and major oil fileds:
• Bolashak Plant NCOC ~50 km (1 h.)
• Tengiz ~330 km (6 h.)
• Astrakhan (shelf) ~400 km (9-11 h.)
• Karachiganak ~700 km (13 h.)
• NCOC base in Bautino ~900 km ( h.)
Advantage of the location:
• Decrease of transportation expenditure and risks
• Minimum damage during transportation
•Quick replacement of structures damaged during installation, and delivery of additional elements if required
• Prompt support of installation works

13. Construction of steel structure and machinery plant in Nur-Sultan city
Land lot in the territory of special economical zone “Astana-New city” with territory of 3 ha was provided by Akimat of Nur-Sultan city in 2018.
Currently, our Company obtained all permitting documents for construction and has already started early works on the land lot.
We decided to divide the plant construction into II sets.
What set 1 includes:
Total area of the set 1 is 1.5 ha.
- Administration building– 3 floors;
- production shop;
- Railroad;
- Other works.
The other part of the construction set II is 1.5 ha.
On the territory of set 2 land lot, there is a possibility to start a new business, construct a new plant for any sector falling into top priority activities of SEZ.

14. Our experience
Key projects

15. Key Projects ЕРС - contract
Project title: Design and construction of all-season carriage wash complex for 25 carriages.
CITY: Nur-Sultan
CLIENT:
PROJECT DESCRIPTION:
Carriage washing shop with passage m
Storage warehouse - 178,6 m
Staff room m
Building for underground tanks m
Design and construction is executed in accordance with high quality standards and safety to ensure appropriate operation of utilities, recirculating water system, chemical reagent usage, waste water treatment

16. Key projects ЕРС - contract
Project title: Building for gas generator and vapor generator УКПНиГ Kashagan
CLIENT:
PROJECT DESCRIPTION:
Construction Installation
Painting
Insulation
Testing and pre-commissioning works
Support in performance of commissioning works
Gas-turbine generator building - 4 x 5000 m
Vapor generator building - 4 x 7000 m

17. Key projects ЕРС - contract
PROJECT TITLE: УКПНиГ Kashan – Sub-station and compressor buildings
CLIENT:
PROJECT DESCRIPTION:
Fabrication Installation
Testing and pre-commissioning
Support in performance of commissioning works of Compressors – 3 ea
Oil producing area m²
Gas – bearing area m²
Gas – bearing area m²
Substation - 6 ea
Oil producing area - 2 X 1800 m²
Gas – bearing area - 4 X 1800 m²

18. Key Projects ЕРС - contract
PROJECT TITLE: Additional re-boilers of integrated oil treatment plant
CLIENT:
PROJECT DESRIPTION:
Detailed design, fabrication and large- dimensioned assembly of steel structure for additional re-boilers of crude stabilization units and fractional units – 650 tons;
Detailed design, procurement, fabrication and installation fencing, service and access platforms – running meters ;
Detailed design, procurement, fabrication and installation service and access platform gratings – m²;
Procurement and application of epoxy intumescent coating on load bearing – m²;
Fabrication, surface preparation and anti-corrosion of piping spools for module piping and process pipeline of dia from ½ up to 30 inches – over weld joints;
Hydro-testing of piping under pressure up to 97,5 bar – over meters;
Bench testing of valves of diameter from 6 to 30 inches with pressure up to 150 bar ea;
Fabrication of pipe supports – 90 tons;
Fabrication of temporary elements for module transportation – 130 tons.

19. Key Projects ЕРС - contract
Project Title: Auxiliary remote instrument enclosure of next generation collecting system TCO MAC RIE PROJECT
CLIENT:
PROJECT DESCRIPTION:
The project of auxiliary RIE of next generation collection system, as general contracting for automation of Future Growth Project anticipates procurement of materials and equipment, detailed engineering, fabrication and assembly of 6 RIE, including installation of steel frames, architectural works, insulation works, installation of electrical system, security system, HVAC and instrumentation control system and equipment.

20. OUR CLIENTS

21. LICENSES and CERTIFICATES
CCT Quality Management System Системы is certified for compliance of ISO 9001:2016, ISO 14001:2015 and OHSAS 18001:2007.
All goods have ST KZ certificates and certificates of conformity to standards of Republic of Kazakhstan.
Company has category 1 and 2 licenses in sphere of construction, architecture, design and engineering, manufacturing and producing, health and environment safety.
All personnel pass through annual qualification and certification in accordance with Republic of Kazakhstan and international requirements.
The Company has license for management of radioactive waste “ Radioactive rehabilitation, re-cultivation of radioactive territories and facilities”.

22. OUR CONTACTS