Presentation is loading. Please wait.

Presentation is loading. Please wait.

Comparison of an artificial gyroid structure with a natural one

Published byEdmund Ellis Modified over 5 years ago

Similar presentations

Presentation on theme: "Comparison of an artificial gyroid structure with a natural one"— Presentation transcript:

1 Fig. 1 Comparison of an artificial gyroid structure with a natural one.
Comparison of an artificial gyroid structure with a natural one. (A) Photograph of the butterfly C. rubi. (B) SEM image of the nanostructures found within the butterfly wings, with a periodicity of around 350 nm. (C) An artificial gyroid nanostructure fabricated by optical two-beam super-resolution lithography with a unit cell size of 360 nm. (D) Zoom-in of the artificial gyroid nanostructure. (E) White light reflection microscopy image of an artificial gyroid. Its lattice constant is 360 nm. The size of the structure is about 20 μm × 20 μm × 4 μm. Zongsong Gan et al. Sci Adv 2016;2:e Copyright © 2016, The Authors

Download ppt "Comparison of an artificial gyroid structure with a natural one"

Similar presentations

Living Organisms Consist of Cells State the resolution and magnification that can be achieved by a light microscope Explain the difference between magnification.

Living Organisms Consist of Cells State the resolution and magnification that can be achieved by a light microscope Explain the difference between magnification.
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 6 Knockdown of nestin impaired tendon repair and regeneration in a rat model of patellar tendon defect. Knockdown of nestin impaired tendon repair.

Fig. 6 Knockdown of nestin impaired tendon repair and regeneration in a rat model of patellar tendon defect. Knockdown of nestin impaired tendon repair.
Fig. 1 Characterization of decellularized zECM.

Fig. 1 Characterization of decellularized zECM.
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Electronically conducting xylem wires.

Fig. 2 Electronically conducting xylem wires.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
The rain-fed maize growing niche in the southwestern United States, A

The rain-fed maize growing niche in the southwestern United States, A
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 3 Evolution of absorber with annealing.

Fig. 3 Evolution of absorber with annealing.
Fig. 2 In situ GIXD analysis tracing the thermal history of the 5CB-NOBOW 50:50 mixture in AAO upon cooling (dAAO = 60 nm). In situ GIXD analysis tracing.

Fig. 2 In situ GIXD analysis tracing the thermal history of the 5CB-NOBOW 50:50 mixture in AAO upon cooling (dAAO = 60 nm). In situ GIXD analysis tracing.
Fig. 2 General properties of Nafion/PVDF membranes.

Fig. 2 General properties of Nafion/PVDF membranes.
Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of.

Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of.
Structural analysis of graphene-embedded FeN4 (FeN4/GN) catalysts

Structural analysis of graphene-embedded FeN4 (FeN4/GN) catalysts
Fig. 5 High-speed printing and process performance metrics.

Fig. 5 High-speed printing and process performance metrics.
Fig. 3 Mechanism and result of the super-resolution RLP.

Fig. 3 Mechanism and result of the super-resolution RLP.
Fig. 2 CdS thin films with three different shapes.

Fig. 2 CdS thin films with three different shapes.
Fig. 2 Fluence-dependent emission characteristics of CH3NH3PbI3 recorded at 15 and 300 K. Fluence-dependent emission characteristics of CH3NH3PbI3 recorded.

Fig. 2 Fluence-dependent emission characteristics of CH3NH3PbI3 recorded at 15 and 300 K. Fluence-dependent emission characteristics of CH3NH3PbI3 recorded.
Fig. 1 CFHT photometry converted into spectral reflectivity obtained on UT (Universal Time) 22 and 25 October 2014, is shown in comparison to the VLT reflectivity.

Fig. 1 CFHT photometry converted into spectral reflectivity obtained on UT (Universal Time) 22 and 25 October 2014, is shown in comparison to the VLT reflectivity.
Fig. 2 Materials and designs for bioresorbable PC microcavity-based pressure and temperature sensors. Materials and designs for bioresorbable PC microcavity-based.

Fig. 2 Materials and designs for bioresorbable PC microcavity-based pressure and temperature sensors. Materials and designs for bioresorbable PC microcavity-based.

Similar presentations

Ads by Google