Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 2 Printed three-axis acceleration sensor.

Published by인영 양 Modified over 4 years ago

Similar presentations

Presentation on theme: "Fig. 2 Printed three-axis acceleration sensor."— Presentation transcript:

1 Fig. 2 Printed three-axis acceleration sensor.
Printed three-axis acceleration sensor. Circuit diagram (A), image (B), and cross-sectional schematic (C) of the acceleration sensor. GND, ground line. Stress distributions extracted from FEM simulations on application of (D) z-axis and (E) y-axis accelerations (20 m/s2). (F) Resistance change of strain sensor #1 under z-axis acceleration of 1 and 2 Hz. (G) Compiled resistance change of sensor #1 under x-, y-, and z-axis accelerations as a function of acceleration frequency. Resistance change of sensor #1 under y- and z-axis positive and negative accelerations (H) and their compiled results, with maximum stress extracted from the FEM simulations (I). (J) Three-axis acceleration detection by measuring the three strain sensors simultaneously when x-, y-, and z-axis accelerations are applied. Yuki Yamamoto et al. Sci Adv 2016;2:e Copyright © 2016, The Authors

Download ppt "Fig. 2 Printed three-axis acceleration sensor."

Similar presentations

Fig. 6 Knockdown of nestin impaired tendon repair and regeneration in a rat model of patellar tendon defect. Knockdown of nestin impaired tendon repair.

Fig. 6 Knockdown of nestin impaired tendon repair and regeneration in a rat model of patellar tendon defect. Knockdown of nestin impaired tendon repair.
Fig. 5 Correlation of RNA expression and protein abundance.

Fig. 5 Correlation of RNA expression and protein abundance.
Fig. 4 Estimations of nonlinear functionals of a single-qubit state with the quantum Fredkin gate. Estimations of nonlinear functionals of a single-qubit.

Fig. 4 Estimations of nonlinear functionals of a single-qubit state with the quantum Fredkin gate. Estimations of nonlinear functionals of a single-qubit.
Fig. 1 Cyclic voltammetric and electrochemical modeling of KOH-LiOH-CoO eutectic systems. Cyclic voltammetric and electrochemical modeling of KOH-LiOH-CoO.

Fig. 1 Cyclic voltammetric and electrochemical modeling of KOH-LiOH-CoO eutectic systems. Cyclic voltammetric and electrochemical modeling of KOH-LiOH-CoO.
Fig. 2 APT reconstructed volumes of human dental enamel HAP nanowires showing intergranular Mg-rich ACP. APT reconstructed volumes of human dental enamel.

Fig. 2 APT reconstructed volumes of human dental enamel HAP nanowires showing intergranular Mg-rich ACP. APT reconstructed volumes of human dental enamel.
Fig. 2 2D-IR spectroscopy on liquid ZnPa under dry conditions.

Fig. 2 2D-IR spectroscopy on liquid ZnPa under dry conditions.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 NP-free Ch-CNC droplets.

Fig. 1 NP-free Ch-CNC droplets.
Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.

Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.
Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.

Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 5 The gate voltage dependence of IEE of the Rashba-split 2DEG between SrTiO3 and 3-UC LaAlO3. The gate voltage dependence of IEE of the Rashba-split.

Fig. 5 The gate voltage dependence of IEE of the Rashba-split 2DEG between SrTiO3 and 3-UC LaAlO3. The gate voltage dependence of IEE of the Rashba-split.
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.

Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 3 Power generation of the TED and its impact on active cooling.

Fig. 3 Power generation of the TED and its impact on active cooling.
Fig. 5 Wearable closed-loop HMI.

Fig. 5 Wearable closed-loop HMI.
Fig. 3 Characteristics of UV and temperature sensors.

Fig. 3 Characteristics of UV and temperature sensors.
Fig. 5 PEDOT-infused leaves.

Fig. 5 PEDOT-infused leaves.

Similar presentations

Ads by Google