1. A PROTOTYPE DESIGN OF SEWERS WITH A SOLID WASTE FILTRATION SYSTEM

2. INTRODUCTION Solid waste has a serious impact on the environment it should also needs to be managed in order to reduce threats to public health, safety, and the environment. Improper disposal of houses and commercial buildings solid waste can create unsanitary conditions, and these conditions in turn can lead to pollution of the environment. The creation of Solid Waste Filtration System in Sewers helps to prevent this common problems with less efforts on cleaning the seashore and sewers.

3. WHAT IS SEWER? A sewer is an underground conduit for carrying of drainage water and waste matter. A sanitary sewer or foul sewer is an underground pipe or tunnel system for transporting sewage from houses and commercial buildings to treatment facilities or disposal.

4. PROBLEMS Difficulty in separating the solid waste from the water Poor management of waste can leads to pollution and release of toxins into our natural resources These wastes when not removed end up settling in residential places where these wastes are burnt thereby causing climate change otherwise these wastes block the drainage systems.

5. WHY IS IT IMPORTANT? With this device, we can ensure that the solid wastes are filtered and be placed in a container which can eliminate the odor by not spreading in the air. Helps to protect the environment from different kinds of environmental hazards through the promotion waste management by the removal of garbage from the drainage system The solid waste filtration system in sewer helps to cleaned this time to time, which designed that will automatically throw out these impurities and will keep the water clean.

7. When the sewer is empty, the Green LED lights up indicating that there is no presence of debris.The system will send a signal to the sewer sensor to confirm if there is solid waste available of sewer if there is Red LED lights up indicating that the weighing scale has reached specific weight. Solid waste then will flow and once it will reach the sensor.

9. MICRO LOAD CELL (0-100G) - CZL639HD

10. (HX711 LOAD CELL AMPLIFIER)

11. ARDUINO UNO

12. SG90 MICRO SERVO MOTOR 360 DEGREES