1. PS magnet status
D Bodart 25/06/2019

2. Status of the injection bumpers
Production of the pre-serie magnet: 29/01/2018
Placement of the contract for production serie: 18/11/2018
Status of the production: All equipments available and machined. Magnets are under assembly
Inspection of the manufacturing: Yokes and coils are within specifications
IP2 covers available, support fixture ready for installation
Fig. 1 Assembly of the magnet yokes compensation coils
Fig. 2 finished coils
Fig. 3 finished magnet supports
Fig. 4 Assembly of the coil ends

3. Status of the injection bumpers
Planned delivery of the four bumper: 07/2019
Certification of the magnets: 07/2019
Magnetic measurements: 08/2019
Ajustement of the sextupolar compensation: TBC with Marco (mail 19/06). The sextupolar component generated by the chamber is almost not visible (10 -4 ) order with current configuration. Adjustment range of the coils is within 102 of the required span. Measurements of the tuning resistances has been performed to choose the ones matching with the generated field.
NB: to install the magnets the vacuum chambers shall be installed.
Fig. 5 finished magnet yokes

4. Status of the BGI vertical magnet
Placement of the contract for production serie: 18/06/2019
Status of the production: Steel is currently shipped for lamination cutting.
Kick-off meeting with production company was done on 20/06/2019.
The company SEF has built the BGI horizontal version and knows the constraints of the manufacturing in terms of assembly integration and performances.
Integration of the magnet is finished including installation of the vacuum chamber in the magnet.
Fig. 6 top view of the BGI setup
Fig. 7 side view of the BGI (outer ring)