1. FEMAS Development - Progress
FEMAS Development Team
December 04, 2012

2. Working Plan Task Description Status Estimated Time
2D Cross. Sect. Analys. Testing
Database for 2D cross. sectional analysis testing
Done
06/12/2012
2D Cross. Sect. Analys. Testing Matrix
Matrix description for 2D cross sectional tests
Released New Version
Released Version of FEMAS
06/05/2012
Long-Term Plan
Including known problems/features and input received during EMC consortium
License file
License file - not only in program file
05/28/2012
2D Cross Sect. Task
In 2D cross sect. analysis will be added possibility to correct RLGC data because of “roughness effect”
Export/Load Plot to/from File
Will be added possibility to save/load plot data and settings into/from the file 2

3. Working Plan Task Description Status Estimated Time Delay Problem
Implemented new algorithm, which makes impulse response “Physically causal”
Done
05/21/2012
Circuits
Circuit block in LPA
2D Cross. Sect – Task
2D cross sect. analysis was transformed from tool to task
Pre-emphasis filter testing
Will be compared matlab and FEMAS results
06/26/2012
Documentation
Developers level: descript. of funct.
Users level: Users manual
07/10/2012
Description of algorithms
07/24/2012 3

4. Working Plan Task Description Status Estimated Time
S-parameters Analysis
Technical specification - Updated
Done
07/10/2012
LPA Testing
Database for Link Path Analysis Testing
Implement help system
User’s manual will be converted in html format and added in FEMAS help
Smoothing filter
Change Wp and Ws parameters from rad/sample to frequency Hz
Changes according to Matteo’s suggestions
Default values, Pre-emphasis taps, Move blocks in schematic matrix, arrange names of channels alphabetically 4

5. Working Plan Task Description Status Estimated Time
Change Linear Interpolation Method
We need to interpolate magnitude and phase instead of real and imaginary parts
Done
07/24/2012
Modify pre-emphasis filter
Implement pre-emphasis filter with any number of pre and post taps
Units
Add units everywhere it is possible: Sources - VHigh, VLow, rise/fall time, bitrate, delay, also in eye diagram
Student License
Limited functionality for students
Smoothing Filter Testing
Test smoothing filter and created test report
Update User’s Manual and Functionalities
Users manual and functionalities where updated according changes made during this two week 5

6. Working Plan Task Description Status Time Student License Modified
Custom geometry for 2D Cross Section Analysis is allowed – restriction is 3 traces
Done
07/31/2012
Smoothing Filter
Add option to choose smoothing method: Butterworth/Chebyshev
Jitter Analysis for Input Signal
Added: Random Jitter, Duty Cycle Distortion and Periodic Jitter to the Source Waveform
Fixed bug in AC simulation
New Release
Will be created new version 6

7. Working Plan Task Description Status Time
Added Possibility to Calculate All Tasks in the Project
Added button “Calculate All” in LPA projects
Done
08/14/2012
Signal Analyzer
Added new tool “Signal Analyzer”
Improved LPA Performance
Added possibility to begin or finish channel with 1 port s-parameters block
Testing of jitter injection
Tao has tasted jitter injection for input waveform
Tested Conversion from Time to Frequency Domain
Compared matlab fft FEMAS Conversion tool and Analytically calculated results for Gaussian, Step, … signals
08/21/2012
Added Validation Check in LPA
Will be calculated recommended frequency range for s-parameters and checked if
Added Filter: Inter-Symbol Interference (in GUI) 7

8. Working Plan Task Description Time Custom geometry
It will be possible to create custom geometry from GUI
Done
08/28/2012
T and P Network sequence
In circuit models will be added possibility to define sequence of parallel and sequential T and P networks – Technical Specification
Tx Equalization – De-emphasis
Tx Equalization now consists Pre-emphasis and De-emphasis 8

9. Working Plan Task Description Time Custom geometry
Added – Triangle, Trapezoid, Circle and Ellipse
Done
09/04/2012
Prepared Environment for DLLs
FIR Equalization
Functionality for De-emphasis, Pre-emphasis and FFE equalization is done
FFE Optimization
Functionality for FFE optimization is done
DFE Equalization
Functionality for DFE equalization is done 9

10. Working Plan Task Description Time
Parallel and series of circuit elements
Add possibility to define Parallel and series of circuit element
Done
09/11/2012
Mutual inductance
Integrate possibility in FEMAS to use mutual inductance
Improvement in custom geometry
Added possibility to remove regions from custom geometry
Custom geometry - Description images
Added description images in GUI for custom geometry
09/18/2012
Tested different cases
Change Student License Activation
License issues will be updated according to new specification
Description of functions in Equalization.dll
Created documentation for Equalization: Description of functions and used algorithms (Only CTLE optimization left) 10

11. Working Plan Task Description Time FEMAS interface for equalization
Prepare FEMAS interface for equalization
Done
10/02/2012
Description of functions in Equalization.dll
Added CTLE optimization
09/25/2012
Equalization.dll
CTLE optimization was added
Test Equalization
Preliminary testing for all functionalities is done.
Integrate Equalization
Integrate equalization into FEMAS GUI
10/16/2012 11

12. Working Plan Task Description Time Tx equalization with gain
Added calculation of tx equalization using gain
Done
10/23/2012
Mathematical operations with equalized waveforms
Added mathematical operations with equalized waveforms for terminations
Post processing Rx equalization
Added possibility to calculate best coefficients and equalize signal without channel calculation
Frequency depended complex impedance
Added frequency depended complex impedance for sources and terminations
Updated documentation
All documentation was updated
Created New release 12

13. Task Description Time Export Debye Model
Corrected export debye model format
10/30/2012
Load training signal from source
Added possibility to load training signal for ffe and dfe optimization from source
Add CTLE block between s-p blocks
CTLE block can be used everywhere in the channel
De-embedding tools was added
Separate tool for de-embedding of s-parameters was added
12/04/2012
S-parameters.dll
Was created S-parameters dll and implemented with GUI 13

14. Area for loading s-parameters
De-embedding
Toolbar for managing s-parameters
De-embedded s-parameters will be loaded here
Area for loading s-parameters
Cascaded s-parameters
Missing block location

15. Load s-parameter files into De-Embedding Tool

16. De-embedding
Selected s-parameters will be loaded into “input blocks” section
It will be possible also to import blocks from LPA task

17. Operations with s-parameters block list
De-Embedding
Operations with s-parameters block list
Add additional blocks in the list
Remove blocks from the list (allowed multiple selection)
Export selected block into file
Navigation: Move Up
Navigation: Move Down
Clear the list

18. De-Embedding
Define cascaded s-parameters

19. De-Embedding
Define location for de-embedded s-parameters

20. It is possible to export result block into file
De-Embedding
Calculate de-embedded s-parameters block and export
It is possible to export result block into file

21. De-Embedding S-parameters simulation was done for two blocks
Cascaded block

22. De-Embedding
Two tests where done
Right de-embedding
Left de-embedding

23. De-Embedding
Results

24. sparameters.dll DLL Concept femas_sparameters.dll Passivity check
Passivity enforce
Cascading
Left de-embading
Right de-embading
Causality???

25. Causality
Number of points 285 and 287

26. Causality

27. Causality Number of points for both cases 199:
The small changes for input gives huge difference in results – instability issue

28. Causality
It is necessary to rewrite code for causality – Different algorithms must be used for numerical calculations:
Lagrange interpolation
Huge number
Huge number
Separate calculation of numerator and denumerator is unstable
Stable calculation
Minimum one week is needed

29. Extrapolation
Extrapolated transfer function
Original
Extrapolated

30. Extrapolation
Channel Response before and after Time correction + extrapolation

31. Task Description Time AMI source models Try Different Filters
In Progress
Try Different Filters
Use Hamming Window and Rational Function to extrapolate transfer function, when we have not enough frequencies
Create DLLs for all FEMAS functionalities
Jitter decomposition
De-Embedding 31

32. Task Description Time Differential Sources and probes
S-parameters & Channel Analyzer
Impedance Matrix
Geometry for 2D Cross Sect. Analysis
HSpice and PSpice formats in circuit 32