Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 3 Polarized perovskite nanocomposites via 3D printing.

Published byFrank Nash Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 3 Polarized perovskite nanocomposites via 3D printing."— Presentation transcript:

1 Fig. 3 Polarized perovskite nanocomposites via 3D printing.
Polarized perovskite nanocomposites via 3D printing. (A) A photo (left) is downsized to a 3-bit grayscale image consisting of 60 (w) × 90 (h) square-shaped pixels (left, inset). Taking advantage of the polarization angle–dependent emission intensities, we convert the grayscale intensities to eight different printing directions (top right) and print the image (middle). (B) Polarization holograms. When viewed using a pair of linear polarizers, the two-layer device projects an image of Taj Mahal (horizontally printed, horizontal polarization) and Forbidden City (vertically printed, vertical polarization). (C and D) A mechano-optical metamaterial based on an auxetic structure. (C) The unit cell (top) consists of four rotating squares, which can rotate up to 45°. The polarization-dependent emission results in a strain-intensity relationship (bottom). (D) This structure is flexible and can adhere to a finger (top). Undergoing reversible stretching motions, the digitally patterned H letter (printed in vertical direction and in parallel with the polarizers) is displayed (left) or encrypted (right). Nanjia Zhou et al. Sci Adv 2019;5:eaav8141 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 3 Polarized perovskite nanocomposites via 3D printing."

Similar presentations

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.
Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)

Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 6 Thermoelectric figure of merit of ZrCoBi-based half-Heuslers and measured heat-to-electricity conversion efficiency. Thermoelectric figure of merit.

Fig. 6 Thermoelectric figure of merit of ZrCoBi-based half-Heuslers and measured heat-to-electricity conversion efficiency. Thermoelectric figure of merit.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 3 Electron PSD in various regions.

Fig. 3 Electron PSD in various regions.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.
Fig. 1 Reference-fixing experiment, setup.

Fig. 1 Reference-fixing experiment, setup.
Fig. 1 Concept of the livestock transition in China between 1980 and 2010. Concept of the livestock transition in China between 1980 and 2010. The left-

Fig. 1 Concept of the livestock transition in China between 1980 and Concept of the livestock transition in China between 1980 and The left-
Fig. 1 Distribution of total and fake news shares.

Fig. 1 Distribution of total and fake news shares.

Similar presentations

Ads by Google