Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 4 Energy balance analysis in STD systems.

Published byNathaniel Booth Modified over 4 years ago

Similar presentations

Presentation on theme: "Fig. 4 Energy balance analysis in STD systems."— Presentation transcript:

1 Fig. 4 Energy balance analysis in STD systems.
Energy balance analysis in STD systems. Energy balance analysis is performed in four different steady-state STD configurations: (A) a nonselective absorber with a finite bulk solution volume with perfect thermal insulation, (B) a selective absorber with a finite bulk solution volume with perfect thermal insulation, (C) a selective absorber with an infinite bulk solution volume and no wick, and (D) a selective absorber with an infinite bulk solution volume and wick. For each scenario, the energy flux and temperature of the absorber as a function of the solar absorptivity (α) of the absorber are also plotted next to the schematic of each STD configuration. In each plot, the total incoming solar flux is 1000 W m−2, and it is equal to the sum of the unabsorbed solar flux (orange region), the radiative heat loss (red region), the convective heat loss (purple region), the heat loss to water (brown region), and the energy consumption for evaporation (blue region). The dashed black curve represents the average temperature of the absorber. Zhangxin Wang et al. Sci Adv 2019;5:eaax0763 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 4 Energy balance analysis in STD systems."

Similar presentations

Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 3 Oil, gas, and FP water variations with time.

Fig. 3 Oil, gas, and FP water variations with time.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.

Fig. 4 Complete separation of water and solute after stable and efficient solar evaporation. Complete separation of water and solute after stable and efficient.
Fig. 1 Comparison of experimental and simulated NMR relaxation rates at 278 to 298 K. Comparison of experimental and simulated NMR relaxation rates at.

Fig. 1 Comparison of experimental and simulated NMR relaxation rates at 278 to 298 K. Comparison of experimental and simulated NMR relaxation rates at.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.

Fig. 2 Ferroelectric domains resolved in WTe2 single crystals.
Fig. 3 Glucose- and structure-dependent insulin release.

Fig. 3 Glucose- and structure-dependent insulin release.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.
Fig. 5 Structural photocycle for DmCry.

Fig. 5 Structural photocycle for DmCry.
Fig. 6 External drivers and model response.

Fig. 6 External drivers and model response.
Fig. 6 Solar utilization efficiency and SEC in thermal and nonthermal desalination systems. Solar utilization efficiency and SEC in thermal and nonthermal.

Fig. 6 Solar utilization efficiency and SEC in thermal and nonthermal desalination systems. Solar utilization efficiency and SEC in thermal and nonthermal.
Fig. 1 Distribution of total and fake news shares.

Fig. 1 Distribution of total and fake news shares.
Fig. 3 Characteristics of UV and temperature sensors.

Fig. 3 Characteristics of UV and temperature sensors.

Similar presentations

Ads by Google