Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 4 Characterization of nanowood.

Published byBranden Howard Modified over 4 years ago

Similar presentations

Presentation on theme: "Fig. 4 Characterization of nanowood."— Presentation transcript:

1 Fig. 4 Characterization of nanowood.
Characterization of nanowood. (A) Thermal conductivity comparison among existing thermally insulating materials. The nanowood exhibits a very low transverse thermal conductivity along with high anisotropy. (B) Mechanical properties of the nanowood in comparison to other materials with a thermal conductivity smaller than 0.05 W/m·K, as well as natural basswood. (C) Photographs of a bulk piece of a nanowood and a thin and rollable nanowood. The arrows indicate the alignment direction. (D) Reflectance of the nanowood. The nanowood exhibits a larger reflectance covering the spectrum of solar radiation (that is, a low solar-weighted emissivity compared with wood). The blue curve is air mass 1.5 solar spectrum. a.u., arbitrary units. (E) Infrared image of the natural wood and nanowood when illuminated by a laser with a wavelength at 820 nm. (F) Temperature profile for the samples in (E). Tian Li et al. Sci Adv 2018;4:eaar3724 Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 4 Characterization of nanowood."

Similar presentations

Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 4 Ballistic simulation of BP FETs.

Fig. 4 Ballistic simulation of BP FETs.
Fig. 3 FM MnBi2Te4 bulk. FM MnBi2Te4 bulk. Crystal structure (A) and band structure (B) of the FM bulk. (C) Zoom-in band structures along the out-of-plane.

Fig. 3 FM MnBi2Te4 bulk. FM MnBi2Te4 bulk. Crystal structure (A) and band structure (B) of the FM bulk. (C) Zoom-in band structures along the out-of-plane.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.

Fig. 4 INS spectra of different human bones from the Roman period [humerus, ulna, femur, and fibula from the same skeleton, Guidonia-Montecelio, Italy.
Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.

Fig. 3 Vibrational spectra of human bones from the Copper Age (Scoglietto cave, Italy). Vibrational spectra of human bones from the Copper Age (Scoglietto.
Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)

Vibrational spectra of medieval human bones (Leopoli-Cencelle, Italy)
Fig. 3 Oil, gas, and FP water variations with time.

Fig. 3 Oil, gas, and FP water variations with time.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Crystal and electronic structure of WTe2.

Fig. 1 Crystal and electronic structure of WTe2.
Fig. 3 Saturation velocity of BP FETs.

Fig. 3 Saturation velocity of BP FETs.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 3 Glucose- and structure-dependent insulin release.

Fig. 3 Glucose- and structure-dependent insulin release.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 2 Stratigraphic profile of the Area 15 excavation block showing the diagnostic cultural materials and components alongside the stratigraphic sequence.

Fig. 2 Stratigraphic profile of the Area 15 excavation block showing the diagnostic cultural materials and components alongside the stratigraphic sequence.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Similar presentations

Ads by Google