1. The International Plant Protection Convention
IPPC Regional Workshop 2016
Changes to the Standard Setting Process
xx xxxx 2016

2. Topics The IPPC Secretariat makes a call for topics every two years.
Who can submit topics?
IPPC Official Contact Points
Regional plant protection organizations (RPPOs)

3. Consultation Periods Draft Specifications (60 days)
First Consultation (90 days)
Second Consultation (90 days)
All starting 1st July
For 2016 Specifications were not sent for consultation. The draft specifications will go for an e-decision as SC May did not have time to discuss them

4. Objection Second Consultation (90 days) On draft ISPMs
SC approves for adoption
Objection!
must be accompanied by technical justification and suggestions for improvement
No Objection If all Contracting Parties support the adoption of the draft ISPM, the CPM should adopt the ISPM without discussion
If a CP does not support the adoption of the draft ISPM, the CP may submit an objection. An objection must be accompanied by technical justification and suggestions for improvement of the draft ISPM which are likely to be acceptable to other CPs and be submitted to the IPPC Secretariat no later than 3 weeks before the CPM session An objection should be a technically supported objection to the adoption of the draft standard in its current form and sent through the official IPPC contact point (Refer to the Criteria to help determine whether a formal objection is technically justified as approved by CPM-8 (2013), recorded in the IPPC Procedure manual for standard setting).