1. Oregon Robotics Tournament and Outreach Program
RCX Basics

2. Program 1 Motor wires attached to Ports A and C
Press the red On-Off button. What happens?
Press the Prgm button until a 1 appears
Put your robot on the floor and press the Run button. What happens?
Turn one of the motor wires 180 degrees and press the Run button. What happens?

3. Program 2 Connect two touch sensors with long wires to Ports 1 and 3
Turn on the RCX and select Program 2
Put your robot on the floor and press Run. What happens?
Using the touch sensor on Port 1, push and hold the yellow button. What happens?
Do the same with the touch sensor on Port 3
“Drive” your robot around the floor

4. Program 3 Light sensor connected to Port 2
Turn on the RCX and select Program 3
Hold your robot and press the Run button
What happens as you move the light sensor between the white area and the black area below?