1. HBS Series
Closed Loop Stepper System

2. Fast Response
Servo System
Gain Tuning

3. Fast Response
Synchronizes with Command Pulses Providing Fast Positional
Zero-Speed Stability
Continuous operation during rapid short-stroke movement

4. No Gain Tuning Eliminate the need of tedious gain tuning
Suited for Low Stiffness Loads without Gearbox

5. No Hunting HBS Series Servo
Complete Stop
Hunting
HBS Series
Servo
Complete stand-still motion is possible due to the availability of holding torque, a typical characteristic of stepper motor.

6. Closed-Loop
Traditional Stepper
Smoothing & Accuracy
Torque
Heating

7. No Loss
Closed-loop system avoid a potential loss of synchronism between command steps and the actual steps

8. Smoothing & Accuracy
DSP( Digital Signal Processor) performs vector control and filtering, producing a smooth rotational control with minimum ripples

9. Torque & Heating
Higher efficiency from low heat and high torque generation is achieved by controlling the current flow to motor according to motor load.

10. Application Short-Stroke Movement Null Hunt
High torque performance in the low speed range delivers shorter positioning time for short stroke at high hit rate applications.
Null Hunt
The unique characteristics of stepper motors and locks itself into the desired target position, eliminating Null Hunt. This feature is especially useful in applications such as nanotech manufacturing, semiconductor fabrication, vi-sion systems and inkjet printing in which system oscillation and vibration could be a problem.

11. Competitive In The Market
FASTECH
Performance
FESTO CMMS-ST
30%
Cost
SANYO PB

12. Thank You!