1. Objective The student will be able to:
multiply two polynomials using the FOIL method, Box method and the distributive property.
Designed by Skip Tyler, Varina High School 1

2. How do we find the area of a square?2

3. The correct formula is written above.
Use it to find the area of the square below. 3

4. As we have already said, to find the area, we
square the length of a side. 4

5. What happens to the area if we add 3 units to the length and 1 unit to the width?5

6. This definitely increases the area
This definitely increases the area. How can we find the area of the new shape? 6

7. One way would be to add the areas of the individual rectangles that we have formed.7

8. 8

9. Another way of doing this would be using the formula for the area of a rectangle?9

10. A=lw
A=(x+3)(x+1) 10

11. How do we get from (x+3)(x+1) to ?
We have already seen that 2(x+1) = 2x+2
We were able to do this multiplication by using the
distributive property. We can also use the
distributive property when we are multiplying
polynomials by polynomials. 11

12. There are three techniques you can use for multiplying polynomials.
The best part about it is that they are all the same! Huh? Whaddaya mean?
It’s all about how you write it…Here they are!
Distributive Property
FOIL
Box Method
Sit back, relax (but make sure to write this down), and I’ll show ya!

13. 1) Multiply. (2x + 3)(5x + 8)
Using the distributive property, multiply 2x(5x + 8) + 3(5x + 8).
10x2 + 16x + 15x + 24
Combine like terms.
10x2 + 31x + 24
A shortcut of the distributive property is called the FOIL method.

14. The FOIL method is ONLY used when you multiply 2 binomials
The FOIL method is ONLY used when you multiply 2 binomials. It is an acronym and tells you which terms to multiply. 2) Use the FOIL method to multiply the following binomials: (y + 3)(y + 7).

15. (y + 3)(y + 7). F tells you to multiply the FIRST terms of each binomial.

16. (y + 3)(y + 7). O tells you to multiply the OUTER terms of each binomial.

17. (y + 3)(y + 7). I tells you to multiply the INNER terms of each binomial.
y2 + 7y + 3y 17

18. (y + 3)(y + 7). L tells you to multiply the LAST terms of each binomial.
y2 + 7y + 3y + 21
Combine like terms.
y2 + 10y + 21

19. Remember, FOIL reminds you to multiply the:
First terms
Outer terms
Inner terms
Last terms

20. The third method is the Box Method. This method works for every problem!
Here’s how you do it. Multiply (3x – 5)(5x + 2)
Draw a box. Write a polynomial on the top and side of a box. It does not matter which goes where.
This will be modeled in the next problem along with FOIL. 3x -5 5x +2

21. 3) Multiply (3x - 5)(5x + 2) 3x -5 5x +2 15x2 +6x -25x 15x2 -25x -10
First terms:
Outer terms:
Inner terms:
Last terms:
Combine like terms.
15x2 - 19x – 10 3x -5 5x +2
+6x
-25x
15x2
-25x
-10
+6x
-10
You have 3 techniques. Pick the one you like the best!

22. 4) Multiply (7p - 2)(3p - 4) 7p -2 3p -4 21p2 -28p -6p 21p2 -6p +8
First terms:
Outer terms:
Inner terms:
Last terms:
Combine like terms.
21p2 – 34p + 8 7p -2 3p -4
-28p
-6p
21p2
-6p +8
-28p +8

23. Multiply (y + 4)(y – 3) y2 + y – 12 y2 – y – 12 y2 + 7y – 12

24. Multiply (2a – 3b)(2a + 4b) 4a2 + 14ab – 12b2 4a2 – 14ab – 12b2
4a2 + 8ab – 6ba – 12b2
4a2 + 2ab – 12b2
4a2 – 2ab – 12b2

25. Group and combine like terms.
5) Multiply (2x - 5)(x2 - 5x + 4)
You cannot use FOIL because they are not BOTH binomials. You must use the distributive property.
2x(x2 - 5x + 4) - 5(x2 - 5x + 4)
2x3 - 10x2 + 8x - 5x2 + 25x - 20
Group and combine like terms.
2x3 - 10x2 - 5x2 + 8x + 25x - 20
2x3 - 15x2 + 33x - 20 25

26. 5) Multiply (2x - 5)(x2 - 5x + 4) You cannot use FOIL because they are not BOTH binomials. You must use the distributive property or box method. x2
-5x +4 2x -5
2x3
-10x2
+8x
Almost done!
Go to the next slide!
-5x2
+25x
-20 26

27. 5) Multiply (2x - 5)(x2 - 5x + 4) Combine like terms!+4 2x -5
2x3
-10x2
+8x
-5x2
+25x
-20
2x3 – 15x2 + 33x - 20 27

28. Multiply (2p + 1)(p2 – 3p + 4) 2p3 + 2p3 + p + 4 y2 – y – 12