1. Schematic to Pictorial
G7c
Schematic to
Pictorial

2. You will now draw the Pictorial by following the Schematic

3. The process will be to follow the schematic one wire at a time from one component to another component until you are finished.

4. The series of slides that follow will show the wire in RED on the schematic that is going to be wired on the pictorial. Then the pictorial slide will show that wire being ‘installed.’ This is the wire you are to place on your pictorial. Keep advancing through this slide presentation until you are finished with the pictorial.

5. Let’s move onto the 120v LINE VOLTAGE circuit.

6. This page has the whole circuit shown
This page has the whole circuit shown. But let’s move onto the next screen where there will be a ‘closer’ view of the 120v circuit.

8. Please use page G7c
for the 120v circuit.
NOTE: Disregard this
information on this
page. This circuit is
included as part of
page G7b.

31. You have finished the 120v LINE VOLTAGE circuit.

32. The next slide shows your completed PICTORIAL and this is what you need to show your Instructor for credit.

34. THE
END