1. Car model made by: Jonathan Stickle Cate Guempel Max vonBlankenburg
Hyundai Prototype
Car model made by:
Jonathan Stickle
Cate Guempel
Max vonBlankenburg

2. Hyundai
2011/12/04/11/24/2012_hyundai_gen esis_coupe-pic jpeg

3. Materials Cost Total: $18.31 2 D-cell batteries- $1.50
2 Engines- about $3
Weights-$1 in pennies
String-5 cents
Glue-$2
Wheels- $6 for all 4
Wire- 50 cents
Wood- 50 cents worth
Rubber Bands- 10 cents
Gears- $2
Nylon Washers- 16 cents for all eight
Da button- $1.50
Total: $18.31

4. Why you should by our car
Doesn’t use gasoline, which is expensive
Lightweight
Keeps the air free from methane and other toxic gases
Quiet

5. Car Design
We decided that our car should run on batteries and motors. In order to make the car stop, we had to make some way to cut the power at around 5 meters. We decided that the most efficient way was to have a string wind around an axle, to eventually gain enough tension to cut the wire connection.

6. Building process
The creation of our car was limited to 20 hours, 4 of which took place at home. During that period, our car underwent much tweaking and idea transformations. We used a lot of hot glue.

7. FINISHED PRODUCT

8. Data Graphs

9. Potential vs. Kinetic vs. Thermal Energy

10. Thank You!!!