1. Vectorman productions present: A Nick enterprise:
Momentum and Impulse
Version: 1.29
this product is intended for the serious physics student, if you are not a serious physics
student,please use version 1.3, momentum and impulse
for dummies

2. Introduction to Momentum
Momentum is the “quantity of motion.”
Momentum is represented by “p”.
Momentum is the product of the mass and the velocity of an object or: p=mv
Momentum is a vector quantity, meaning it has both magnitude and direction.
Measured in units of kg m/s

3. Introduction to Impulse
Impulse is the product of the net force acting on a given body during the time it acts. Units are N s.
Impulse = F(Δt)
Impulse = Change in Momentum
“A large change in momentum occurs only when there is a large impulse. A large impulse, however, can result from either a large force acting over a short time, or a smaller force acting over a longer time.”
F * t = F * T

4. Remember Newton’s 2nd Law?

5. Conservation of Momentum
The total momentum of a system of objects must remain constant unless outside forces act upon the system.
Momentum, like other physical quantities, cannot be destroyed, merely redistributed.
Momentum is distributed through impulse, or the change in momentum (see how this all fits together yet?)
Most studies of the conservation of momentum involve collisions.

6. Types of Collisions
Perfectly (completely) Inelastic Collisions -collisions where the objects stick together and move as one. The mass after the collision is equal to the sum of the masses and there is just one final velocity. Kinetic energy is not conserved since a lot of kinetic energy is converted to heat or other energies.
Perfectly (completely) Elastic Collisions – collisions where the objects bounce off of each other or separate. They then return to their original shape. Kinetic energy is conserved.
Many collisions are neither completely elastic or inelastic. They separate after the collision but do not return to their original shape, so heat is created and kinetic energy is lost.
Separation or Explosion Collisions – the objects are at rest initially or are all one object and then they separate.

7. Inelastic - Collisions that Stick
For Collisions that Stick, the after mass is the sum of all the masses, and there is a common or shared velocity.
Remember: pinitial = pfinal
m1v1+m2v2= (m1+m2) vf v1 v2 m1 m2 vf
(m1 + m2)

8. Elastic Collisions m1v1+m2v2 =m1v1’+m2v2’ ’ means after the collision
Before
Remember: pinitial = pfinal
m1v1+m2v2 =m1v1’+m2v2’
Usually mass remains the same after the collision but this does not always happen.
’ means after the collision v1 m1 m2
After
v1’
v2’ m1 m2

9. Perfectly Elastic Collisions
Momentum is conserved.
Kinetic energy is also conserved.

10. Separations/Explosions
Sometimes objects start as one and separate into two or more parts moving with individual velocities.
Example: A bullet is fired from a rifle. The bullet leaves the rifle with a velocity of vb and as a result the rifle has a recoil velocity of vr.
Solution: Before the rifle is fired the momentum of the system is zero. So… 0 = mbvb’ + mrvr’
Note: for total momentum to remain zero, the rifle’s momentum must be equal to but in the opposite direction to the bullet’s momentum.

11. The Law of Momentum Conservation
Momentum Conservation Principle

12. For a collision occurring between object 1 and object 2 in a closed, isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision. That is, the momentum lost by object 1 is equal to the momentum gained by object 2.
A closed isolated system
is a set of objects
which encounter no
forces or influences other
than those they exert on
each other.

13. Consider a collision between two objects - object 1 and object 2
Consider a collision between two objects - object 1 and object 2. For such a collision, the forces acting between the two objects are equal in magnitude and opposite in direction (Newton’s Third Law)

14. The forces act between the two objects for a given amount of time.
Regardless of how long the time is, it can be said that the time that the force acts upon object 1 is equal to the time that the force acts upon object 2.

15. Since the forces between the two objects are equal in magnitude and opposite in direction, and since the times for which these forces act are equal in magnitude, it follows that the impulses experienced by the two objects are also equal in magnitude and opposite in direction.

16. Since each object experiences equal and opposite impulses, it follows logically that they must also experience equal and opposite momentum changes.

17. In a collision, the momentum change of object 1 is equal and opposite to the momentum change of object 2. That is, the momentum lost by object 1 is equal to the momentum gained by object 2.

18. Why use an Airbag? Δp = F t m (vf – vi) = F t m (vf - vi ) = F t
Since the change in momentum and thus the impulse stays the same whether or not you have an airbag, the force with which you hit will be decreased by increasing the time over which the force acts.
Δp = F t
m (vf – vi) = F t
m (vf - vi ) = F t

19. Why follow through in your golf swing?
By following through you are increasing the time that the club is in contact with the ball. Thus you are increasing the impulse (assuming force is the same) which results in a greater change in momentum. That means a greater acceleration or change in velocity so the ball will go faster and/or farther (if a tree or other obstacle doesn’t get in its way!).
F t = Δ p
F t = m Δv

20. Consider a collision in football between a fullback and a linebacker during a goal-line stand. The fullback plunges across the goal line and collides in midair with linebacker. The linebacker and fullback hold each other and travel together after the collision. The fullback possesses a momentum of 100 kg*m/s, East before the collision and the linebacker possesses a momentum of 120 kg*m/s, West before the collision. The total momentum of the system before the collision is 20 kg*m/s, West.

21. Therefore, the total momentum of the system after the collision must also be 20 kg*m/s, West. The fullback and the linebacker move together as a single unit after the collision with a combined momentum of 20 kg*m/s. Momentum is conserved in the collision.