Presentation is loading. Please wait.

Presentation is loading. Please wait.

Solution Preparation Experiment

Similar presentations


Presentation on theme: "Solution Preparation Experiment"— Presentation transcript:

1 Solution Preparation Experiment
CHE116

2 Purpose of This Experiment
To learn how to prepare solutions To practice using a spectrophotometer To learn how to make a calibration curve Work in groups of 2 (each person must prepare their own calibration curve) CHE116

3 Preparing a Stock Solution
Use the liquid red dye to prepare a 1.0%v/v concentrated solution. This is the stock solution that will be used to prepare the diluted solutions. CHE116

4 Preparing the Diluted Solutions
(Mc) (Vc) = (Md) (Vd) (This equation also works for units other than Molarity.) Mc is the concentration of the concentrated solution Vc is the volume of the concentrated solution used (pipetted) Md is the concentration of the diluted solution Vd is the volume of the diluted solution CHE116

5 Preparing a Solution by Dilution
To prepare a dilute solution using a concentrated stock solution: You need to know what molarity the new solution will be (Md) (See Table 1, page 32) You need to know the volume the new solution will be (Vd = mL) You need to know the concentration of the concentrated stock solution (Mc = 1.0 %v/v) You need to calculate the volume of concentrated stock solution that you will pipet (Vc). CHE116

6 Remember…. Do not put any pipet or other piece of equipment into the red dye bottle. Pour some of the red dye into a clean, dry beaker and use this liquid from the beaker to prepare your stock solution. All prepared solutions should be covered and inverted to mix well CHE116

7 Find the Absorbance of Your Prepared Solutions
Use a disposable transfer pipet (plastic) to almost fill a small test tube with your solution Wipe the outside of the test tube (remove droplets and fingerprints) Place this test tube in the sample compartment of the spectrophotometer (use the same spectrophotometer each time) Record the absorbance readout from the spectrophotometer CHE116

8 Spectrophotometer An instrument that will indicate the amount of light (of one wavelength) absorbed by a sample Readout detector sample monochromator Light source slit LED readout CHE116

9 Beer – Lambert Law A = abc A is absorbance of light by the sample a is the molar extinction coefficient b is the solution path length c is the concentration of solute This is a linear relationship; y = mx + b y is absorbance, x is concentration CHE116

10 Calibration Curves Calibration curves show the linear relationship between absorbance and concentration. Absorbance Concentration, units CHE116

11 Making the Calibration Curve
You will have an absorbance reading for each standard solution (diluted solution) Plot the corresponding concentration and absorbance values as data points on a graph CHE116

12 Hand Draw a Best-Fit Line
Absorbance Concentration, units CHE116

13 Using the Calibration Curve
You will have an absorbance reading for your unknown solution. Find that absorbance reading on the y-axis of the calibration curve. At that point on the y-axis, move horizontally across to the calibration curve line (use a ruler) When you reach the line, drop straight down to the x-axis The value that you are at on the-x axis is the concentration of your solution CHE116

14 Calibration Curve Absorbance Unknown solution absorbance reading
Concentration, units Unknown solution absorbance reading Your concentration CHE116


Download ppt "Solution Preparation Experiment"

Similar presentations


Ads by Google