Presentation is loading. Please wait.

Presentation is loading. Please wait.

Acids and Bases 15.5-15.6.

Similar presentations


Presentation on theme: "Acids and Bases 15.5-15.6."— Presentation transcript:

1 Acids and Bases

2 15.5 - Autoionization of Water & pH

3 Water is Amphoteric! Amphoteric: a compound able to react both as an acid and as a base. Even when in a pure form, water acts as an acid and a base with itself. This process is called autoionization. A very small amount of ions will form in pure water. Some molecules of H2O will act as acids, each donating a proton to a corresponding H2O molecule that acts as a base. The proton-donating molecule becomes a hydroxide ion (OH-) while the proton-accepting molecule becomes a hydronium ion (H3O+).

4 The equilibrium constant is called:
the ion product constant for water (kw) (sometimes called the dissociation constant for water) In pure water, since H2O is the only source of these ions, the concentration of H3O+ ions and OH- are equal, and the solution is neutral. Since the concentrations are equal, we easily calculate them from Kw. [H3O+] = [OH-] = √ Kw = 1.0 x 10^-7 (in pure water at 25 degrees C)

5 Kw = [H3O+] [OH-] = 1.0 x 10^-14 at 25C
Formula (on reference table): Kw = [H3O+] [OH-] = 1.0 x 10^-14 at 25C The concentration of H3O+ times the concentration of OH- is always equal to 1.0 x 10^-14 at 25C.

6 Therefore… If [H3O+] increases, Then [OH-] must decrease in order for the ion product constant (that’s nothing fancy, just kw the equilibrium constant) to remain 1.0 x 10^-14.

7 In an acidic solution [H3O+] > [OH-]
This change would make an acidic solution. An acidic solution contains an acid that creates additional H3O+ ion causing the [H3O-] to increase and the [OH-] to decrease. In an acidic solution [H3O+] > [OH-]

8 If [H3O+] = 1.0 x 10^-3, what is the concentration of OH-?
Walk Through: If [H3O+] = 1.0 x 10^-3, what is the concentration of OH-? Solve the ion product constant expression for [OH-] with the formula from the reference table. Kw = [H3O+] [OH-] = 1.0 x 10^-14 at 25C Is this solution acidic or basic? [H3O+] [OH-] = 1.0 x 10^-14 (1.0 x 10^-3)[OH-] = 1.0 x 10^-14 [OH-] = (1.0 x 10^-14)/(1.0 x 10^-3) [OH] = 1.0 x 10^-11 M Acidic: 1.0 x 10-3 > 1.0 x 10-11 [H3O+] > [OH-]

9 And… If [OH-] increases, Then [H3O+] must decrease in order for the ion product constant (still just kw the equilibrium constant) to remain 1.0 x 10^-14.

10 In a basic solution [H3O+] < [OH-]
This change would make a basic solution. A basic solution contains a base that creates additional OH- ions causing the [OH-] to increase and the [H3O-] to decrease. In a basic solution [H3O+] < [OH-]

11 Walk Through If [OH-] = 1.0 x 10^-12, solve the ion product constant expression for [H3O+]. Use the Kw formula from the reference table. Is this solution acidic, basic or neutral? [H3O+] [OH-] = 1.0 x 10^-14 [H3O+] (1.0 x 10^-12) = 1.0 x 10^-14 [H3O+] = (1.0 x 10^-14)/(1.0 x 10^-12) [H3O+] = 1.0 x 10-2 M Basic: 1.0 x 10-2 < 1.0 x 10-12 [H3O-] > [OH-]

12 Notice: Changing [H3O+] in an aqueous solution produces an inverse change in [OH-] and vise versa.

13 Summarizing Kw: A neutral solution contains
[H3O+] = [OH-] = 1.0 x 10^-7 M (at 25C) An acidic solution contains [H3O+] > [OH-] A basic solution contains [OH-] > [H3O+]

14 Practice Problem! Calculate [OH-] at 25C for each solution and determine if the solution is acidic, basic, or neutral. [H3O+] = 7.5 x 10-5 M [H3O+] = 1.5 x 10-9 M [H3O+] = 1.0 x 10-7 M

15 Answers: (7.5 x 10-5 )[OH-] = (1.0 x 10-14)
a) [OH-] = 1.3 x M, acidic solution b) [OH-] = 6.7 x 10-6 M, basic solution c) [OH-] = 1.0 x 10-7 M, neutral solution (7.5 x 10-5 )[OH-] = (1.0 x 10-14) [OH-] = (1.0 x )/(7.5 x 10-5 ) (1.5 x 10-9 )[OH-] = (1.0 x 10-14) [OH-] = (1.0 x )/(1.5 x 10-9 ) (1.0 x 10-7)[OH-] = (1.0 x 10-14) [OH-] = (1.0 x )/(1.0 x 10-7)

16 The pH scale: A Way to Quantify Acidity and Basicity
pH is defined as the negative of the log of the hydronium ion concentration. Formula: pH = -log[H3O+] Note: write pH to two decimals places because only the numbers to the right of the decimal are significant in a logarithmic A solution with [H3O+] = 1.0 x 10-7 M (neutral at 25C) has a pH of: pH = -log[H3O+] = -log(1.0 x 10-7 ) = 7

17 In General… pH < 7 Acidic Solution pH > 7 Basic Solution
pH = Neutral Solution

18 Because the pH scale is a logarithmic scale, an increase of 1 on the pH scale corresponds to a factor of 10 decrease in [H3O+]. ACIDIC BASIC

19 Practice Problems! Calculate the pH of each solution at 25C and indicate whether the solution is acidic or basic. [H3O+] = 1.8 x 10-4 M [OH-] = 1.3 x 10-2 M 2) Calculate the [H3O+] for a solution with a pH of 4.80

20 Answers 1a) pH = -log[H3O+] = -log(1.8 x 10-4 ) = -(-3.74)
= 3.74 (acidic) pH = -log[H3O+] = -log(7.7 x 10-13) = -(-12.11) = 12.11(basic) 1b) First find [H3O+] using Kw. [H3O+] [OH-] = 1.0 x 10-14 [H3O+](1.3 x 10-2 M) = 1.0 x 10-14 [H3O+] = (1.0 x 10-14)/(1.3 x 10-2 M) [H3O+] = 7.7 x M

21 2) pH = -log[H3O+] 4.8 = -log[H3O+] -4.8 = log10[H3O+] = [H3O+] [H3O+] = 1.6 x 10-5 M Divide by -1 Take the base of the log (base = 10) and raise it to the power of Then set that equal to [H3O+] and plug into your calculator.

22 pOH & Other p Scales The pOH scale is comparable to the to the pH scale but is defined with respect to [OH-] instead of [H3O+]. It can be found when the [OH-] is known. pOH = -log[OH-] On the pOH scale… pOH < 7 basic pOH > 7 acidic pOH = 7 neutral Ex: A solution with an [OH-] of 1.0 x 10-3 M has a pOH of 3 (basic).

23

24 We can derive a relationship between pH and pOH at 25C from the expression for Kw:
[H3O+] [OH-] = 1.0 x 10-14 Take the log of both sides: log([H3O+] [OH-]) = log(1.0 x 10-14) log[H3O+] + log[OH-] = -log[H3O+] - log[OH-] = 14.00 pH + pOH = 14 Note: the sum of pH and pOH is always 14 at 25C. Therefore, a solution with a pH of 3 has a pOH of 11.

25 The pKa Scale pKa = -logKa
The pKa of a weak acid is another way to quantify its strength. The smaller the pKa , the stronger the acid.

26 15.6 - Finding the [H3O+] and pH of Strong and Weak Acid Solutions

27 A solution containing a strong or weak acid has two potential sources of [H3O+]:
The ionization of the acid itself HA(aq) + H2O(l) H3O+(aq) + A-(aq) The autoionization of water H2O(l) + H2O(l) H3O+(aq) + OH- The autoionization of water contributes a negligibly small amount of H3O+ compared to the ionization of the strong or weak acid. In a strong or weak acid solution, the additional H3O+ from the acid causes the autoionization equilibrium to shift left. Therefore, the autoionization of water produces even less H3O+ than in pure water and so it can be neglected. We just focus on amount of H3O+ produced by the acid.

28 Strong Acids Because… Strong acids completely ionize in solution
& we can ignore the ions contributed by the autoionization of water The concentration of H3O+ in a strong acid solution is equal to the concentration of the strong acid. Ex: 0.10 M HCl [H3O+] = 0.10 M pH = -log[H3O+] = -log(0.10) = 1.00

29

30 Weak Acids The concentration of H3O+ is not equal to the concentration of a weak acid. Calculating the [H3O+] formed by the ionization of a weak acid requires solving an equilibrium problem (Think Chapter 14 ICE Tables). Since we can still ignore the contribution of H3O+ from the autoionization of water, we only have to determine the concentration of H3O+ formed by: HA(aq) + H2O(l) H3O+(aq) + A-(aq)

31

32 “The pH of an acid solution depends on both the strength of the acid and the concentration of the acid”(College Board)

33 Consider a 0. 10 M solution of the generic weak acid HA
Consider a 0.10 M solution of the generic weak acid HA. We ignore the autoionization of water and just determine the concentration of H3O+ formed by the following equilibrium: HA(aq) + H2O(l) H3O+(aq) + A-(aq) [HA] [H3O+] [A-] Initial 0.10 ~0.00 0.00 Change -x +x Equilibrium x x

34 Find the value of x by using the equilibrium expression to set up an equation with x as the only variable. Ka = ([H3O+][A-]) / [HA] Ka= x2 / x (The value of the acid ionization constant will be given for you to substitute in for Ka.)

35 Practice Problem! Find the [H3O+] of a M HCN solution. Ka= 4.9 x [HCN] [H3O+] [CN-] Initial 0.100 Change -x +x Equilibrium x x

36 Answer Ka = ([H3O+][CN-]) / [HCN] = x2 / (0.100 - x)
[H3O+] = 7.0 x 10-6 “x is small” approximation allows you to cross out x and ignore it (7.0 x 10-6 / 0.1) x 100 = 7.0 x 10 -3% Confirm that the x is small approximation is valid by calculating the ratio of x to the number it was subtracted from in approximation. The ratio should be less than 0.05 or 5%. (if x is small is not valid you solve the equation normally with the quadratic equation)

37 Practice Problem! Find the pH of a 2.00 M HNO2 solution. Ka = 4.6 x 10-4. Hint Think about what value you are missing for the calculation of pH [HNO2] [H3O+] [NO2-] Initial 2.00 Change -x +x Equilibrium x x

38 Answer Ka = ([H3O+][NO2-]) / [HNO2] = x2 / (2.00 - x)
[H3O+] = 3.0 x 10-2 “x is small” approximation allows you to cross out x and ignore it ( 3.0 x 10-2 / 2.00) x 100 = 1.5% Confirm that the x is small approximation is valid by calculating the ratio of x to the number it was subtracted from in approximation. The ratio should be less than 0.05 or 5%.

39 Answer continued pH = -log[H3O+] = -log[3.0 x 10-2] = =1.52

40 Practice Problem! (Last one)
A weak acid (HA) solution has a pH of Find the Ka value for the acid. [HA] [H3O+] [A-] I 0.100 C -3.5 x 10-5 +3.5 x 10-5 E x 10-5 3.5 x 10-5 pH = -log[H3O+] 4.45 = -log[H3O+] [H3O+] = 3.5 x 10-5 M

41 Ka = ([H3O+][A-]) / [HA] = ((3.5 x 10-5)(3.5 x 10-5))/ 0.100 = 1.3 x 10-8

42 Formulas Recap (On Reference Table)
Kw = [H3O+] [OH-] = 1.0 x at 25C pH = -log[H3O+] pOH = -log[OH-] pH + pOH = 14

43 Thanks for Listening! (Good Luck on the test!)


Download ppt "Acids and Bases 15.5-15.6."

Similar presentations


Ads by Google