Presentation is loading. Please wait.

Presentation is loading. Please wait.

Memory Management CSE451 Andrew Whitaker.

Similar presentations


Presentation on theme: "Memory Management CSE451 Andrew Whitaker."— Presentation transcript:

1 Memory Management CSE451 Andrew Whitaker

2 Big Picture The OS is responsible for resource management
Up till now, we’ve focused on how multiple programs share the CPU Now: how do multiple programs share memory? Firefox Word javac

3 Goals of Memory Management
Provide a convenient foundation for programmers, compilers, linkers Hide memory sharing Via virtual addressing Hide memory scarcity Via virtual memory Provide isolation between processes

4 Problem: Memory Relocation
A program 3 MB Firefox Word javac PacMan 0 MB Firefox Word javac PacMan

5 Virtual Addressing Programmer sees a virtual address space, which always starts at zero Hardware/OS map virtual addresses to physical 0MB 1MB 0MB 1MB 0MB 1MB Virtual Addresses Firefox Word PacMan Physical Addresses PacMan Firefox Word

6 Memory Management: Factors to Consider
Workload characteristics Batch systems, Internet systems, interactive systems Level of hardware support Base & Limit registers No HW support Paging, Segmentation, TLBs

7 Strategy #1: Swapping Only one program occupies memory at once
On a context switch: Save old program’s memory to disk Load next program’s memory from disk Either eagerly or lazily Advantage: very simple Disadvantage: disk is exceedingly slow!

8 Why Use Swapping? No Hardware Support Long-lived batch jobs
MIT’s CTSS operating system (1961) was built this way Memory was so small that only one job would fit! Long-lived batch jobs Job switching costs become insignificant as the quantum grows large

9 How Slow is Swapping?

10 Strategy #2: Fixed partitions
Physical memory is broken up into fixed partitions All partitions are the same size Partitions never change Advantages Simple

11 Disadvantages of Fixed Partitions
Internal fragmentation: memory in a partition not used by its owning process isn’t available to other processes Partition size problem: no one size is appropriate for all processes Tradeoff between fragmentation and accommodating large programs

12 Implementing Fixed Partitions
Requires hardware-supported base and limit registers physical memory partition 0 limit register base register 2K 2K P3’s base: 6K partition 1 4K partition 2 6K yes partition 3 <? + offset 8K virtual address partition 4 no 10K raise protection fault partition 5

13 Strategy #3: Variable Partitions
Obvious next step: physical memory is broken up into variable-sized partitions Advantage: no internal fragmentation Simply allocate partition size to be just big enough for process Problems We must know in advance the program size External fragmentation As we load and unload jobs, holes are left scattered throughout physical memory

14 Mechanics of Variable Partitions
physical memory partition 0 limit register base register P3’s size P3’s base partition 1 partition 2 yes <? + offset partition 3 virtual address no partition 4 raise protection fault

15 Dealing with External Fragmentation
Swap a program out Re-load it, adjacent to another Adjust its base register “Lather, rinse, repeat” Ugh partition 0 partition 0 partition 1 partition 1 partition 2 partition 2 partition 3 partition 4 partition 3 partition 4

16 physical address space
Strategy #4: Paging Use fixed-size units of memory (called pages) for both virtual and physical memory virtual address space physical address space page 0 frame 0 page 1 frame 1 page 2 frame 2 page 3 frame Y page X

17 Paging Advantages Paging reduces internal fragmentation
Paging eliminates external fragmentation Disadvantages? Reduce internal fragmentation by making fixed-size chunks relatively small (as opposed to large, fixed parittions) External fragmentationis eliminated becaues the pages are all the same size Another advantage: we can gradually grow / shrink the memory allocated to a process A major disadvantage is that we have more infomration to keep track of, and this approach requires more hardware support

18 Address translation A virtual address has two parts: virtual page number and offset Address translation only applies to the virtual page number Virtual page number (VPN) is index into a page table Page table entry contains page frame number (PFN) Physical address is PFN::offset virtual page # offset

19 Page Tables Managed by the OS
Map a virtual page number (VPN) to a page frame number (PFN) VPN is simply an index into the page table One page table entry (PTE) per page in virtual address space i.e., one PTE per VPN

20 Mechanics of address translation
virtual address virtual page # offset physical memory page frame 0 page table page frame 1 physical address page frame 2 page frame # page frame # offset page frame 3 page frame Y

21 Example of address translation
Assume 32 bit addresses assume page size is 4KB (4096 bytes, or 212 bytes) VPN is 20 bits long (220 VPNs), offset is 12 bits long Let’s translate virtual address 0x VPN is 0x13325, and offset is 0x328 assume page table entry 0x13325 contains value 0x03004 page frame number is 0x03004 VPN 0x13325 maps to PFN 0x03004 physical address = PFN::offset = 0x

22 Page Table Entries (PTEs)
1 1 1 2 20 V R M prot page frame number PTE’s control address mappings The page frame number indicates the physical page The valid bit says whether or not the PTE can be used says whether or not a virtual address is valid The referenced bit says whether the page has been accessed recently The modified bit says whether or not the page is dirty it is set when a write to the page has occurred The protection bits control which operations are allowed read, write, execute

23 Paging Issues (Stay Tuned…)
How to make it fast? Accessing the page table on each memory reference is not workable How to deal with memory scarcity Virtual memory How do we control the memory overhead of page tables? Need one PTE per page in virtual address space 32 bit AS with 4KB pages = 220 PTEs = 1,048,576 PTEs 4 bytes/PTE = 4MB per page table OS’s typically have separate page tables per process 25 processes = 100MB of page tables

24 Strategy #5: Segmentation
Instead of a flat address space, programmers see a collection of segments Virtual address = segment #, offset heap stack main() Shared library segment # offset

25 Why Segments? Facilitates sharing and re-use
Unlike a page, a segment is a logical entity Segments can have arbitrary size

26 Hardware support Segmentation is a generalization of variable-sized partitions Variable sized partitions: 1 segment per process Segmentation: N segments per process So, we need multiple base/limit pairs These are stored in a segment table Segments named by segment #, used as index into table A virtual address is <segment #, offset> Offset of virtual address added to base address of segment to yield physical address

27 Segment lookups <? + segment 0 segment 1 segment 2 yes segment 3 no
segment table base limit physical memory segment 0 segment # offset segment 1 virtual address segment 2 yes <? + segment 3 no segment 4 raise protection fault

28 Pros and cons Yes, it’s “logical” and it facilitates sharing and reuse
But it has all the horror of a variable partition system e.g., external fragmentation

29 Intel x86: Combining segmentation and paging
Use segments to manage logical units Use pages to partition segments into fixed-size chunks Each segment has its own page table There is a page table per segment, rather than per user address space Memory allocation becomes easy once again no contiguous allocation, no external fragmentation Segment # Page # Offset within page Offset within segment

30 Who Uses This? Nobody :-) Linux primarily uses:
Only supported by x86, so portability is a problem Linux primarily uses: 1 kernel code segment, 1 kernel data segment 1 user code segment, 1 user data segment


Download ppt "Memory Management CSE451 Andrew Whitaker."

Similar presentations


Ads by Google