1. A B Hz Hz Rocky Reach Unit 1 on Frequency Control BA – CFC target=60
Not active – Manual
BA – CFC target=60
Not active - Manual
Rocky Reach Unit 1 on Frequency Control

2. A B Hz Hz BA – CFC target=60 Not active – Manual BA – CFC target=60
Rocky Reach Unit 1 on Frequency Control
Remove:
Rocky Reach Unit 1 on Frequency Control

3. A B 1. Place BA to “CNI” Hz 2. Place unit(s) in “Auto”
To maintain tie at “0”. A B
Auto
0 MW
BA – CFC target=60
Not active – Manual
BA – CFC target=60
Not active - Manual
Now we will place the BA AGC control to CNI and unit 4 to “Auto” and it will control the tie line flow to the schedule (currently 0).
BA – CNI
Active - Auto

4. Schedule 100 MW from one BA to another
Schedule 100 MW from one BA to another. As Sherrill indicated, you cannot enter a negative schedule. Schedules
Are “from” and “to”.

5. A B Hz 1. Place BA to “CNI” 100 MW BA – CFC target=60
Not active – Manual
Now we will place the BA AGC control to CNI and unit 4 to “Auto” and it will control the tie line flow to the schedule (currently 0).
BA – CNI
Active - Auto
Now with the 100MW
Schedule in place, the
Units in “auto” with control
Tie line flows to 100MW (directional).

6. c

7. c