Presentation is loading. Please wait.

Presentation is loading. Please wait.

Smart Grid ad hoc Closing Report - May 2010

Similar presentations


Presentation on theme: "Smart Grid ad hoc Closing Report - May 2010"— Presentation transcript:

1 Smart Grid ad hoc Closing Report - May 2010
doc.: IEEE /0672r0 May 2010 Smart Grid ad hoc Closing Report - May 2010 Name Company Address Phone Bruce Kraemer Marvell 5488 Marvell Lane, Santa Clara, CA, 95054 Kaberi Banerjee Date: Abstract: Smart Grid ad hoc meeting report Source Document r1 Bruce Kraemer, Marvell Bruce Kraemer (Marvell)

2 Topic - Summary 1. Status of NIST PAP#2 Report status for NIST PAP#2
May 2010 Topic - Summary 1. Status of NIST PAP#2 Report status for NIST PAP#2 Evolution of Use Cases submitted by OpenSG Refinement of terms Refinement of input data for modeling calculations E.g. frame size when including CCMP and end-to-end security overhead Model Output graph script standardization and interpretations Bruce Kraemer, Marvell

3 Report Outline Draft r4 May 2010 Table of Contents
Revision History iii Preface Authors 1 Overview of the process 2 Acronyms and Definitions 2.1 Acronyms 2.2 Definitions 3 Smart grid 3.1 Reference Architecture 3.2 List of actors 3.3 Use Cases 3.4 Application requirements 3.4.1 Smart grid user applications’ quantitative requirements 3.4.2 Aggregation of requirements per actor to actor 4 Wireless Technology 5 Evaluation approach / Modeling approach 5.1 Channel Models 5.1.1 Indoor-indoor environments 5.1.2 Outdoor-outdoor environments 5.1.3 Outdoor-indoor environments 5.2 Physical Layer 5.3 MAC sublayer 5.4 Example Modeling Tool 5.5 Other Tools 6 Findings / Results 7 Conclusions 8 References 9 Bibliography Bruce Kraemer, Marvell

4 Application Information
May 2010 Application Information Q: we further clarify the Smart Grid applications? A: Huge amount of information developed by Open SG Example: Bruce Kraemer, Marvell

5 May 2010 May doc.: IEEE 802.11-10/0672r0 Bruce Kraemer, Marvell
Bruce Kraemer, Marvell Bruce Kraemer (Marvell)

6 May 2010 Listing of pertinent use cases
In order to create a list of functional requirements for the Smart Grid, an exercise was performed to list all pertinent use cases that involve network communication. Sources for this information include the Southern California Edison Use Cases, Grid Wise Architectural Console use cases, EPRI and others. Use cases from all of these sources were selected based upon a network requirements basis. From this research the following high level use cases have been identified Bruce Kraemer, Marvell

7 900+ Uses cases documented
May 2010 900+ Uses cases documented Bruce Kraemer, Marvell

8 Resulting Data Message sizes (for this selection)
May 2010 Resulting Data Message sizes (for this selection) On-demand meter read bytes TLS bytes Transport TCP bytes IP-SEC (Tunnel mode) bytes IPv bytes IEEE CCMP bytes IEEE bytes DSSS bytes TOTALS bytes Similarly for Application Error on-demand meter read TOTALS bytes Similarly for Multiple interval meter read TOTALS bytes bytes* *Exceeds MTU of must segment into two frames Bruce Kraemer, Marvell

9 Relationship between Throughput and Payload
May 2010 Relationship between Throughput and Payload Throughput High SNR Low SNR Lower SNR Payload Length Bruce Kraemer, Marvell

10 Framing May 2010 http://forskningsnett.uninett.no/wlan/throughput.html
Bruce Kraemer, Marvell

11 Topic #2 Summary Suitability of 802.11 to Smart Grid
May 2010 Topic #2 Summary Suitability of to Smart Grid As is – Generally complete With addition of TGs mesh and S1G – enhanced range and application diversity Anything Further?? Nothing proposed Bruce Kraemer, Marvell

12 Topic - Summary Next Ad hoc call on Wednesday June 2
May 2010 Topic - Summary Next Ad hoc call on Wednesday June 2 Review Report status Highlights from Connectivity Week, P2030 and SGIP meetings Bruce Kraemer, Marvell


Download ppt "Smart Grid ad hoc Closing Report - May 2010"

Similar presentations


Ads by Google