Presentation is loading. Please wait.

Presentation is loading. Please wait.

ECE 576 POWER SYSTEM DYNAMICS AND STABILITY

Similar presentations


Presentation on theme: "ECE 576 POWER SYSTEM DYNAMICS AND STABILITY"— Presentation transcript:

1 ECE 576 POWER SYSTEM DYNAMICS AND STABILITY
Lecture 1 Introduction and Overview Professor Pete Sauer Department of Electrical and Computer Engineering © 2018 University of Illinois Board of Trustees, All Rights Reserved

2 Spring 2018 Instructors Pete Sauer
University of Illinois at Urbana-Champaign Department of Electrical and Computer Eng. 4046 ECEB, 306 N. Wright St., Urbana, IL 61801 (217) Periodic substitution by: Karl Reinhard 4054 ECEB, 306 N. Wright St., Urbana, IL

3 Power Systems Aircraft Automobiles Standby power sources Electric utilities Mechanical prime movers Electrical generators Electrical network Electrical loads

4 Dynamics and Stability
Engineering analysis static – steady state dynamic – transients Stability – study of system response to disturbance

5 Course Topics Structures EMTP Synchronous machine Controls
Single machine Simulation Multi-machine Steady-state stability Transient Stability

6 Example (linear: spring/mass)
Newton’s 2nd Law

7 Equilibrium Set time derivatives to zero Solve for dynamic states

8 Stability Suppose mass is displaced from xe. Will it return?
Look at the D.E. (v goes negative) so x decreases (Tends to return to xe)

9 (v goes positive) so x increases (Tends to return to xe)
Intuitive conclusion: system is stable at xe

10 c) Response K = 20 N/m C = 0.1 m M = 0.1 kg G = 9.8 m/sec2
Suppose fext = 0 N This gives ve = 0 xe = m What happens if x = m (at rest) and fext is changed to 0.5 N at t = 0?

11 Solve:

12 What if we had gotten ____________ This says x can become negative! Hard surface?

13 Example (nonlinear: pendulum)
Newton’s 2nd Law

14 Equilibrium Set time derivatives to zero (multiple values)

15 Stability ( goes negative) ( decreases) (Tends to go back to e)
Suppose mass is displaced. Will it return to e? Look at D.E. Consider e = 0 ( goes negative) ( decreases) (Tends to go back to e)

16 ( goes positive) ( increases) (Tends to go back to e) Intuitive conclusion: e = 0 is a stable equilibrium point

17 Now try: ( goes positive)  increases (Tends to go away from e)

18 ( goes negative)  decreases (Tends to go away from e) Intuitive conclusion: is an unstable equil. pt.

19 c) Response Suppose  is at e = 0 (e = 0) and Text is changed. What will happen? M = 0.1 kg l = 1 m G = 9.8 m/sec2 Add Text = 0.5 NM at t = 0

20 Solve: ________________________________

21 Numerical Integration
Basic Idea: Taylor Series t small

22 Euler’s Forward method:
t small

23 Choose t = .01 sec

24

25 Tutorial demo The following demonstration software was created for a tutorial on nonlinear dynamics given for Union Electric (Ameren) with funding provided by EPRI in 1993


Download ppt "ECE 576 POWER SYSTEM DYNAMICS AND STABILITY"

Similar presentations


Ads by Google