1. Click here to start

2. NAME: old fashion wind mills
REAL NAMES: Quinton, Jay, Justin
BLADE DESIGN: 6x3 long slab of balsa wood with wooden rod down the middle.
HYPOTHOSIS: Our design uses the old wind mill technique to create electricity

3. Our team consists of three people Jay, Justin, and Quinton.
We started with just two people Jay and me then Justin came.
Our original assignment was to create a wind mill blade that would
Stay at a steady speed while generating a lot of electricity using a box fan.
To solve this we took three feet of balsa wood and split them in half to make 6x3 blades took six wooden rods and glued them to the middle of the wood.
Then we inserted them to the base and started with a 45* angle on the blades. After testing we got a very high voltage and constant turning. On setting one our wind mill picks up voltage and speed causes electricity to be created to make a good result.

4. SPEED 1
SPEED 2
SPEED 3
0.45
0.60
0.82
0.36
0.51
0.66
0.38
0.55
0.74
Average
0.40